• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.564-568
• /
• 2004

Restructuring had made it possible to utilize lower value cuts and meat trimmings from spent animals by providing convenience in product preparation besides enhancing tenderness, palatability and value. Milk co-precipitates (MCP) have been reported to improve the nutritional and functional properties of certain meat products. This study was undertaken to evaluate the influence of incorporation of milk co-precipitates at four different levels viz. 0, 10, 15 and 20% on the quality of restructured buffalo meat blocks. Low-calcium milk co-precipitates were prepared from skim milk by heat and salt coagulation of milk proteins. Meat chunks were mixed with the curing ingredients and chilled water in a Hobart mixer for 5 minutes, followed by addition of milk co-precipitates along with condiments and spice mix and again mixed for 5 minutes. Treated chunks were stuffed in aluminium moulds and cooked in steam without pressure for 1.5 h. After cooking, treated meat blocks were compared for different physico-chemical and sensory attributes. Meat blocks incorporated with 10% MCP were significantly better (p<0.05) than those incorporated with 0, 15 and 20% MCP in cooking yield, percent shrinkage and moisture retention. Sensory scores were also marginally higher for meat blocks incorporated with 10% MCP than product incorporated with 15 and 20% MCP, besides being significantly higher than control. On the basis of above results 10% MCP was considered optimum for the preparation of restructured buffalo meat blocks. Instrumental texture profile analysis revealed that meat blocks incorporated with 10% MCP were significantly better (p<0.05) in hardness/ firmness than control although, no significant (p>0.05) differences were observed in cohesiveness, springiness, gumminess and chewiness of both type of samples.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.377-382
• /
• 2002

This study was carried out for the simultaneous genetic evaluation of swine breeds from the seedstock farms in Korea. The performance tested production records of 96,842 heads and the litter records of 90,396 litters from 1995 to 2001 were analyzed to estimate the breeding values and the breed effects of days to 90kg, daily gain, back fat thickness, loin muscle area, lean meat percent, total litter size and number born alive from Landrace, Yorkshire and Duroc. Estimated breed effects of traits had shown the characteristics of the breeds. Landrace was superior in back fat thickness and lean meat percent to other breeds. Yorkshire had shown good performance in lean meat percent, loin muscle area, total litter size and number born alive. Duroc was superior to the other breeds in days to 90kg and daily gain. Conclusively, the multi-breed genetic evaluation would result in higher connectedness and provide convenience for the routine genetic evaluation process of swine performance and reproduction test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.307-312
• /
• 2009

The study of candidate genes is an important tool to identify genes associated with economic traits. Three genes were selected to study the association between polymorphism and economic traits and breed of pigs. Growth hormone releasing hormone (GHRH) takes part in growth metabolism and is one of the candidate genes known to be highly associated with economic traits in pigs. Heart fatty acid-binding protein (H-FABP) is related to back fat thickness and intramuscular fat (IMF) content, and myogenin (MYOG) is associated with the amount of growth rate and lean yield in pigs. By PCR-RFLP analysis, the association between the genotypes of the three genes and the average daily gain, back fat thickness, feed conversion, body length and meat percent in 352 pigs (112 Duroc pigs, 132 Landrace pigs and 108 Yorkshire pigs) were analyzed. GHRH polymorphisms showed differences depending on breed (p<0.01) and were associated with meat percent. H-FABP polymorphisms also showed significant differences among breeds and sex (p<0.01), and were highly associated with average daily gain, feed conversion and back fat thickness (p<0.01) and even showed an association with meat percent (p<0.05). However, the MYOG gene showed no significant effect in this study. These results reconfirmed that GHRH and H-FABP are potential major genes or markers for economic traits.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.429-435
• /
• 2016

Heritability estimates for daily gain (g), backfat thickness (mm), days to 90kg (day), loin eye depth (mm) and meat percent (%) were 0.40, 0.44, 0.40, 0.25 and 0.48, respectively. Estimates of correlation between breeding value and rank for meat productivity traits by model 1 and 2 were 0.995 1.000 and 0.991 1.000, respectively and highly significant (p< 0.0001), and they were almost identical to the breeding values estimated by different farms. When top 5% and top 10% animals were selected by meat productive traits at different farms, markedly different animals were selected by farms since the selected improvement traits in each farm maintaining closed herds were different. Therefore, it seems to be desirable that superior pigs should be selected after the establishment of evaluation system for genetic performance at national level using the integrated data obtained from various farms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.8
• /
• pp.1061-1065
• /
• 2015

Data collected from 690 purebred Duroc pigs from 2009 to 2012 were used to estimate the heritability, and genetic and phenotypic correlations between production and meat quality traits. Variance components were obtained through the restricted maximum likelihood procedure using Wombat and SAS version 9.0. Animals were raised under the same management in five different breeding farms. The average daily gain, loin muscle area (LMA), backfat thickness (BF), and lean percent (LP) were measured as production traits. Meat quality traits included pH, cooking loss, lightness ($L^*$), redness ($a^*$), yellowness ($b^*$), marbling score (MS), moisture content (MC), water holding capacity (WHC), and shear force. The results showed that the heritability estimates for meat quality traits varied largely from 0.19 to 0.79. Production traits were moderate to highly heritable from 0.41 to 0.73. Genotypically, the BF was positively correlated (p<0.05) with MC (0.786), WHC (0.904), and pH (0.328) but negatively correlated with shear force (-0.533). The results of genetic correlations indicated that selection for less BF could decrease pH, moisture content, and WHC and increase the shear force of meat. Additionally, a significant positive correlation was recorded between average daily gain and WHC, which indicates pork from faster-growing animals has higher WHC. Furthermore, selection for larger LMA and LP could increase MS and lightness color of meat. The meat quality and production traits could be improved simultaneously if desired. Hence, to avoid further deterioration of pork characteristics, appropriate selection of traits should be considered.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.90-100
• /
• 1975

The estimation of the pre-processing condition of oyster is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of oyster, which is the most important shellfish for domestic use and export. The data were analysed by measuring the condition index, chemical composition and heavy metal content of oysters. In order to eliminate the manual work that has to be done on a tightly closed oyster shell and avoid shrinkage in the oyster meat which is attendant on the steaming process, chemical means to open oyster were examined. finding the method of pretreatment of polyphosphate for frozen oysters were attempted to improve the product quality. The prevention of undesirable color change of the canned oyster meat is another problem to solve. The important results are as follows : 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful as an index to measure the condition index of oysters. 2. As a whole, monthly changes of moisture and fat content in oysters were reversely correlated. Protein content slightly decreased from April and rapidly decreased in July, and again rapidly increased in August but from September to November decreased slightly. In April, the content of glycogen was 4 percent. From this period to September, glycogen was rapidly decreased. From July to September, it was only 0. 7 to 1 percent but increased from October. There were little seasonal changes in pH value. The pH value of oyster meat was 6.0 to 6.2. The crude ash content was slightly decreased from June to August. 3. The range of monthly change of heavy metal content are as follows: Total mercury was 0 to 0.019 ppm, cadmium was 0.026 to 0.053 ppm, copper was 0.111 to 0.594 ppm, and lead_was 0.061 to 0.581 ppm. 4. By the results of condition index, chemical composition and heavy metal content of oysters, the suitable harvest season as raw materials for processing was the end of December to the end of May of next year. 5. The pretreatment of 10 percent polyphosphate in 5 percent salt solution of oyster meat appeared effective to reduce thawing drip during cold storage. 6. The pretreatment of $Na_2EDTA$ and BHA did not show the color prevention effect to the canned oyster meat during storage. 7. Magnesium chloride affected to open the valves of oysters.

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.476-491
• /
• 2016

Purpose: This study investigated consumers' perception of food safety and risk from foodborne illness and consumption pattern of meat and processed meat products in Korea. Methods: A quantitative survey was performed by trained interviewers, surveying 1,500 adults who were randomly selected from six major provinces in Korea. Results: Most of the respondents reported foodborne illness risk related to the consumption of raw meat but not related to heated meat and processed meat products. As respondents perceived the risk of food poisoning from raw meat, the purchase and intake decreased (p<0.001). Most of the respondents considered a low possibility of foodborne illness at home. Seventy-seven percent of the respondents thought that bacteria and virus are the main causes of foodborne illness. Improper storage practice (40.7%) and unsafe food material (29.3%) were the main risk factors contributing to foodborne illness. Perception and practice of food safety was significantly different by the residency area. The most preferred meat, processed meat, and processed ground meat products were pork (58%), ham (31.1%), and pork cutlet (40.4%), respectively. The most preferred cooking method was roasting, regardless of the type of meat, but the second preference for cooking method was significantly affected by the type of meat (p<0.001): stir-fried pork, beef with seasoning, fried-chicken and boiled duck. Frequency of eating out was 0.75/day on weekdays and 0.78/day on weekends at the mainly Korean BBQ restaurant. Conclusion: The results of this study could be used to develop science-based education materials for consumer and the specific guideline of risk management of meat and processed meat products.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.269-271
• /
• 2012

The chicken has been growing in Korea for more than a thousand years according to the history book and commercially rising for broiler meat only since 1960's. As income increased mainly due to improved economy, it changes the habit of eating especially chicken meat. The structure changes into a coordinated production and marketing system which forced the prevailed small and independent producers to become a contract farmer under the vertically controlled practices. This coordinated structure began in 1970's and evolved continually to occupy around 90 percent of the market in 2010 with some ten (10) private brands being advertising. The industrial organizations have also conducted the generic promotion by a farmer's check-off program. Over the past 20 years, chicken import steadily increased to meet about 25 percent of the domestic market while the export showed negligible growth. As a whole, the structure change and international trade devoted to increased chicken consumption from 2 kg with the independent operation to 11 kg currently under the coordinated system and import. It is predicted that chicken consumption will grow in years to come and the import will also increase in addition to local productions, considering the free trade agreement that has already been in practice with EU and US to open the market eventually from all sources of supply worldwide.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1523-1526
• /
• 2002

Genetic parameters of carcass weight (CWT), dressing percent (DP), cook loss (CL), eye muscle area (EMA), back fat thickness (BFT), and meat tenderness in terms of mastication (MAS), shear force (SFR) and penetration (PEN) in Korean native cattle were estimated in this study. Effects of sire, location and their interaction on these traits were also evaluated. Sire effects were found to be significant on all the traits studied except for PEN. The CWT and DP were also significantly affected both by location (p<0.01) and by interaction effect between sire${\times}$location (p<0.05). The EMA was significantly (p<0.05) affected by location but not by interaction effect between sire${\times}$location. All the traits were positively correlated ($r_g$ and $r_p$) with each other except between CL and meat tenderness (negatively correlated). Moderate to high genetic correlations between CWT and other important traits were obtained; indicating that selection for CWT would lead to improve carcass quality. Heritability estimates were 0.64, 0.52, 0.37, 0.25, 0.19 and 0.18 for MAS, SFR, CWT, PEN, DP and EMA, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1451-1454
• /
• 2003

The present investigation was carried out to study the affect of feeding urea ammoniated neem kernel meal on carcass characteristics and organoleptic properties of the meat in goats. Eight local weaned kids of 3-4 months age with mean body weight of $7.85{\pm}0.42kg$ were assigned to two groups of four each in a completely randomised design and were offered diets containing isonitrogenous concentrate mixtures containing either peanut meal or urea ammoniated neem (Azadirachta indica) seed kernel meal (UANSKM) along with ad libitium oat hay or green sorghum as roughage for 13 fortnights. The animals were slaughtered at the end of the experimental period and the carcass characteristics and organoleptic evaluation of the meat was carried out. The carcass characteristics in terms of dressing percentage, meat bone ratio, percent edible and inedible did not differ between the treatments. Similarly the organoleptic characteristics and cooking loss were comparable between the treatments implying that UANSKM can be substituted for peanut meal in goat diets to alleviate the shortage and high cost of peanut meal without affecting meat quality.