• Journal of Preventive Medicine and Public Health
• /
• v.20 no.1 s.21
• /
• pp.97-113
• /
• 1987

This study was carried out to know physical growth and development, physical and nutritional indices and body fat weight and so forth by semi-longitudinal research method to measure body height, body weight, chest girth and sitting height of 260 of general high school and 306 of vocational high school 3rd grade students who are living in Seoul and born from 1966 March 1st to 1967 Feb.28th. The results are as follows: 1) Physical growth and development Growth in terms of body height showed one step straight linear development, andthat of body weight showed two step straight linear development in each section in high school. The age of cross over between two sexes of general high school students was between 10.6 to 12. 3 years in body height, between 10.8 to 13 years in body weight, between 11.2 to 14.6 years in chest girth and between 10 to 13 years in sitting height. The age of cross over between two sexes of vocational high school students was between 10.5 to 12.5 years in body height, between 10.5 to 12.5 years in body weight, between 10.5 to 12.5 years in chest girth and between 10.5 to 12.5 years in sitting height. In this periods, female group was superior to male group and after that male group was superior to female group again. The growth of vocational school students was superior to that of general school students in both sexes in terms of body height and body weight significantly. 2) Physical growth and nutritional indices In all cases of relative body weight, relative chest girth and relative sitting height, it was found to be increasing thereafter with advancing ages. In cases of $R{\"{o}}hrer$ index and Kaup index, it was found to be reaching to normal state thereafter with advancing ages. In each case of Vervaeck and Pelidisi index, it was found to be increasing and reaching to normal state thereafter with advancing ages. 3) Total body fat by vital measuring method Average values of body surface area, body volume and body density are measured indirectly by using the body height and body weight as Table 12, 13 and 14. The rate of body fat weight of general high school students was from minimum $11.96{\pm}3.53%(3.33{\pm}1.10kg$) to maximum $18.25{\pm}6.46%(9.08{\pm}2.01kg$) in male and from $25.88{\pm}3.62%(7.96{\pm}0.78kg$) to $43.00{\pm}7.22%(12.91{\pm}1.21kg$) in female. The rate of body fat weight of vocational high school students was from minimum $11.20{\pm}2.88%(3.32{\pm}1.13kg$) to maximum $17.16{\pm}5.88(10.83{\pm}3.16kg$) in male and from minimum $25.11{\pm}2.26%(7.91{\pm}0.89kg$) to maximum $42.16{\pm}7.96%(13.22{\pm}1.75kg$) in female.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.2
• /
• pp.144-150
• /
• 2004

Background : An assessment of the presence and the degree of reversibility of airflow obstruction is clinically important in patients with asthma or chronic obstructive pulmonary disease. However, the time responses of spirometric parameters in response to bronchodilator have not been well investigated. Methods: We studied 15 patients with asthma. Spirometric and mini-Wright peak expiratory flow measurements were performed at 15, 30, 45, and 60 minutes after using single dose($200{\mu}g$) of inhaled bronchodilator, salbutamol. Results : The mean values of forced expiratory volume in one second($FEV_1$) and forced vital capicaty(FVC) were significantly increased at 60 minutes after using bronchodilator in comparison to 15 minutes. And peak expiratory flow rate measured by either mass flow sensor or mini-Wright peak flow meter were significantly increased at 45 minutes after using bronchodilator in comparison to 15 minutes. Conclusions : To appropriate evaluation of the bronchodilator response in patients with reversible airflow limitation, it would be useful measuring either $FEV_1$ or PEF at the later time point 60 or 45 minutes in comparison to 15 minutes after using bronchodilator.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.1-12
• /
• 2017

This paper is brought to asses the training effect of KS-QFD boot camp for the companies in the early growth stage. In particular, the focus of research falls on measuring transfer intension of the participants from the early stage companies older than three years old, motivating effect of applying knowledges acquired from KS-QFD training camp into their real business case. KS-QFD program is presented to help company in the early stage companies over three years old of boosting up their sales volume more than 5 times than now for the next 18 months by this training. The training program of KS-QFD is ultimately to design more practical and helpful program to real business and spread out. The research establish model by setting the learner readiness and perceived content validity by doing training design as independent variables, self-efficacy of learner as mediating variable, and transfer intension as dependant variable. Research results shows the following outcomes. First, learner readiness does not have directly effect on transfer intension under keeping statistical significance. But as the parameter of self-efficacy, it has perfect mediating effect. Second, research proves that perceived content validity have directly impact on learning transfer intension of mediating by self-efficacy partially. This research contributes on proving that learning by doing KS-QFD boot camp enable the participants to build up their self-efficacy and lead to enhance transfer intension. In more steps, the research validates that KS-QFD training camp have delivered very practical and helpful on-site knowledge to the participants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.617-624
• /
• 2015

This paper describes the development of a wearable robot to assist the elbow muscle for use by elderly workers in aging societies. Various previously developed wearable robots have drawbacks in terms of their price, portability, and slow recognition of the wearer's intention. In this paper, emphasis is placed on the following features to minimize these drawbacks. The first feature is that an actuator is attached only at the elbow joint that withstands the highest moment during arm motion to reduce the weight, volume, and price of the robot and increase its practicality. The second is that operation of the wearable robot is divided into two modes, a tracking mode and a muscle strengthening mode, and the robot can automatically switch between these modes by analyzing the wearer's intention through the brachial muscle strength measuring device developed in this study. The assistive performance of the developed wearable robot is experimentally verified by motion tracking experiments without an external load and muscle strengthening experiments with an external load. During the muscle strengthening experiments, the power of the muscle of the upper arm is measured by a commercial electromyography (EMG) sensor. Motion tracking performance at a speed of $120^{\circ}/s$ and muscle assistance of over 60 % were obtained using our robot.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.2
• /
• pp.158-164
• /
• 2008

Purpose : Recently, various materials were developed for enhancing bone formation capacity. Platelet rich plasma(PRP) is an autologous source with several growth factors and obtained by sequestering and concentrating platelets by gradient density centrifugation. This study was to evaluate the effect of PRP on healing of grafted bone. Materials and methods : Two blood samples were obtained and analysed for measuring platelet counts of normal blood and PRP. In experimental group, two defects of mandibular bone, 10mm in diameter and 4.0mm deep, were created in the mandible and immediately grafted with autogenous bone chips mixed with PRP. In control group, same bone defects were prepared and grafted with autogenous bone chips. Gelform was used for carrier of PRP. 2 weeks, 4 weeks, 8 weeks later, each group was evaluated with histologi-cal and histomorphometric analyses. Results : According to histological observation, experimental group was showed more anastomosing newly-formed woven bone having osteoblastic activation than control group. According to histomorphometric analysis, there were 9.11% more newly-formed bone volume in experimental group than control group at 2 weeks, 7.91% more at 4 weeks, 20.08% more at 8 weeks. Conclusion: Our results demonstrated PRP in autogenous bone graft could enhance the bone formation.

• Journal of Korea Water Resources Association
• /
• v.46 no.1
• /
• pp.47-58
• /
• 2013

Recently, an increase in the occurrence of sudden local flooding of great volume and short duration due to global climate changes has occasioned the significant danger and loss of life and property in Korea as well as most parts of the world. Such a local flood that usually occurs as the result of intense rainfall over small regions rises quite quickly with little or no advance warning time to prevent flood damage. To prevent the local flood damage, it is important to quickly predict the flood severity for flood events exceeding a threshold discharge that may cause the flood damage for inland areas. The aim of this study is to develop the NFI (New Flood Index) measuring the severity of floods in small ungauged catchments for use in local flood predictions by the regression analysis between the NFI and rainfall patterns. Flood runoff hydrographs are generated from a rainfall-runoff model using the annual maximum rainfall series of long-term observations for the two study catchments. The flood events above a threshold assumed as the 2-year return period discharge are targeted to estimate the NFI obtained by the geometric mean of the three relative severity factors, such as the flood magnitude ratio, the rising curve gradient, and the flooding duration time. The regression results show that the 3-hour maximum rainfall depths have the highest relationships with the NFI. It is expected that the best-fit regression equation between the NFI and rainfall characteristics can provide the basic database of the preliminary information for predicting the local flood severity in small ungauged catchments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1427-1433
• /
• 2005

This study investigated the quality characteristics of sponge cakes with addition of corn starch. The corn starch was added with 0 (control), 10, 20, 30, and $40\%$ substitution ratios by weight per wheat flour, followed by measuring physical and sensory characteristics of product during storage Periods. Batter specific gravity decreased with increasing substitution levels while viscosity increased. The volume tended to increase according to the addition of corn starch. As storage progresses, hardness and chewiness increased in all treatments. $30\%$ treatments showed lower values, compared to other treatments throughout the storage period. Adhesivness increased as the amount of corn starch increased. The results of sensory evaluation showed that the overall acceptability of sponge cakes containing $20\%\;and\;30\%$ corn starch were higher than that of control without corn starch. Therefore, it can be suggested that of corn starch $30\%$ added to tile sponge cake for the quality improvement and functional element.

• The Journal of Internal Korean Medicine
• /
• v.36 no.2
• /
• pp.165-179
• /
• 2015

Objectives: This experiment investigated the antimicrobial activity of Hwangryunheadok-tang and extracts of Scutellariae radix , Phellodendri cortex , Coptis rhizome , and Gardenia jasminoides against Salmonella typhimurium . Methods: After spreading S. typhimurium on a bacterial culture medium plate, antimicrobial activity was tested by dripping diluted Hwangryunheadok-tang or extracts of Scutellariae radix , Phellodendri cortex , Coptis rhizome , or Gardenia jasminoides (80 μl, diluted 100, 50, 10, and 1%) onto the plate, followed by culture for 16 to 72 hours. The minimal inhibitory concentration (MIC) was tested by dripping the minimum dilution that showed antimicrobial activity (80, 60, 40, and 20 μl) and measuring the density. The antimicrobial activity of Hwangryunheadok-tang and four extracts showed continuous antibacterial activity against S. typhimurium throughout the experiment. Result: 1. S. typhimurium . (Standard Microorganism, ATCC) 1) The Hwangryunheadok-tang and extracts of Scutellariae radix , Phellodendri cortex , and Coptis rhizome showed antibacterial activity in the undiluted solutions and in 50% dilutions. Gardenia jasminoides extract showed potency only in the undiluted solution. The antimicrobial potency of the undiluted solution was increased when the volume of inoculation was increased, but no difference was noted when the culture time was extended. All the extracts showed antimicrobial potency against S. typhimurium . 2. S. typhimurium isolated from diarrhea patients 1) When compared to the standard microorganism experiment on S. typhimurium , the MICs of the five extracts were increased. However, whereas the antimicrobial potency of doxycycline was lost entirely against bacteria isolated from patients with diarrhea, the antimicrobial potency of all the extracts was diminished but did not disappear. 2) The antimicrobial activity of Hwangryunheadok-tang and four extracts was continuous even when the culture time was extended to 16, 24, and 72 hours. Conclusions: The Hwangryunheadok-tang and four kinds of extracts have antimicrobial activity against S. typhimurium . Comparison of a standard microorganism with S. typhimurium isolated from diarrhea patients showed that the antimicrobial activity of all the extracts was better than that of antibiotics. Further studies should focus on the value and benefits of Hwangryunheadok-tang , and the four kinds of extracts as clinical treatments.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.269-279
• /
• 1984

The optimum conditions for measuring cadmium content of less than 0.2ppm by flame atomic absorption spectrophotometry were investigated. The cadmium in urine was extracted by APDC-MIBK for the analysis by atomic absorption spectrophotometry after ashing them by a wet method. 1. Optimum conditions by APDC-MIBK and DDTC-MIBK extractions. The acidic aqueous solution was prepared with appropriate amount of 0.IN nitric acid, 5ml of 25% (W/V) sodium potasstum tartarate, 10ml of saturated ammonium sulfate, and 2ml of 2% APDC(or 1 ml of 5% DDTC) chelating agent. The total volume of solution was adjusted to 55 ml and pH to $2{\sim}10$ (or$7{\sim}10$). The aqueous solution was extracted with 10ml MIBK. Concentration of Triton X-100 did not effect the absorbance for APDC-MIBK extraction of cadmium, but absorbance decreased as the concentration increased for DDTC-MIBK extraction. The sensitivity and detection limits for the cadmium determination from APDC-MIBK extraction were 0.0038ppm and 0.0102, 0.0022ppm and 0.0116 for DDTC-MIBK, and 0.0132ppm and 0.0034 for 0.1N nitric acid. APDC-MIBK and DDTC-MIBK extractions were 3 times higher than 0.1N nitric acid for the sensitivity. 2. Excretion of cadmium in 24-hour urine by APDC-MIBK extraction. Determination of cadmium in urine by atomic absorption spectrophotometry of A.A. (Cd=2 mA) mode and B.C. (Cd=4 mA) mode and B.C. (Cd=4mA, $D_2=20mA$) mode showed some difference (p<0.05). The difference of cadmium determination and recovery according to method of standard additions and standard calibration curve method in urine was not significant (p>0.05, $93.48{\pm}11.78%,\;94.83{\pm}22.00%$). Excretion of cadmium in 24-hour urine collection from normal person and variance analysis within measurement variation was not significant (p>0.05), but between interindividual was significant (0.05). Determination of cadmium content by two different methods of flame atomic absorption spectrophotometry and dithizone colorimetry showed that the results from the two methods can be described by a regression line with a good correlation (y=1.0153x-0.2927, x=Cd by D.C., y=Cd by A.A.S., $r=0.8651^*$, p<0.01).

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.24-30
• /
• 2016

Autoignition characteristic is an important factor of all combustible substances, and a critical determinant in assessing the effectiveness of fire hazard prevention. This study investigated the autoignition characteristic of mixtures of Ethylene Glycol and water using an ASTM D2155 type ignition temperature measuring apparatus. It was possible to get the minimum temperature as $434^{\circ}C$ from 100% Ethylene Glycol within range of $75{\sim}160{\mu}l$. A volume of $100{\sim}125{\mu}l$ of a mixed sample of Ethylene Glycol and water (80 : 20) was ignited at the same temperature ($434^{\circ}C$). Also it was possible to get the auto ignition temperature as $437^{\circ}C$ from a mixed sample of Ethylene Glycol and water (60 : 40) within range of $120{\sim}160{\mu}l$. The instantaneous ignition temperatures determined for $125{\mu}l$ of each of the three samples were $579^{\circ}C$, $595^{\circ}C$ and $611^{\circ}C$, respectively. Both auto ignition temperatures and instantaneous ignition temperatures were increased through the addition of water to the samples.