• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.603-611
• /
• 2015

This research is aimed at cutting off hearing loss and other harmful factors due to noise and providing basic material for noise reduction plan. As the research method, this research assessed noise by measuring acoustic pressure level and frequency in various situation of non-treatment and treatment. As the measurement result, average noise degree of high speed handpiece of non-treatment, ultrasonic waves scaler, and low speed handpiece showed 58~66 dB(A). Average noise degree of scaling of treatment, tooth elimination, and denture adjust showed 73~81 dB(A). The result is inferior to recognized standards of noise induced hearing loss. But the result of assessing this with (noise rating) NR curve was NR-73~78, which exceeded general workplace noise standard. This level can cause hearing loss when exposed to a long time. Therefore, treatment office noise during dental treatment can cause psychological and physical damage in dental clinic employees, and it is urgently required to establish systematic and active noise reduction plan.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.644-651
• /
• 1999

In this experiment the Iron phthalocyanine (FePc) films on Si-wafer and alumina pallet were prepared using vacuum sublimation with conditions of changing reaction time, temperature, and deposition rate. Then, some samples were annealed following annealing. Techniques such as XRD, SEM, and resistance measurement method, were dedicated to characterize the changes of surface structure, phase transformation and electric resistance sensitivity in accordance with change of film thickness. In proportion to the decrease of deposition temperature from $370^{\circ}C$ to $350^{\circ}C$, intensities of (200), (011), (211) and (114) planes of $\alpha$-phase were decreased and (100) plane of $\beta$-phase were appeared. The film thickness were controlled by regulating the volume of precursor material during rapid deposition. As a result, it was observed that crystalline particle size had been increased according to the increase of film thickness and $\alpha$-phase transformed to $\beta$-phase. In consequence of measuring the crystallinity of films annealed between $150^{\circ}C$ and $350^{\circ}C$, $\alpha$- to $\beta$-phase transformation was appeared to begin at $150^{\circ}C$ and completely transformed to $\beta$-phase at $350^{\circ}C$. Electric resistance sensitivity of FePc film to $NO_x$ gas along temperature change of FePc films was observed to be more stable with the decrease of the film thickness.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.4
• /
• pp.57-67
• /
• 2014

The vigor condition of trees is an important indicator for the management of urban forested area. But difficulties in how to assess the tree vigor condition still remain. Previous efforts were limited in the 1) measurement of single indicator rather than using multiple indices, 2) purpose-oriented measurement such as for air-pollution effect or specific pathological symptom, and 3) ordinal-scale evaluations by field crews 4) despite human errors based on his/her experiences or prior knowledge. Therefore, this study attempted to develop a quantitative and objective methodology for assessing tree vigor condition, by measuring multiple modules and building the profile inventory. Furthermore, the possibility and limitations were discussed in terms of schematic frames describing tree vigor condition. The vigor condition of 56 flowering cherry plants in urban park were assessed by in-situ measurements of following eight items; growth of crown(Gc), growth of shoots, individual tree volume(Vol), plant area index, woody area index, leaf area index, leaf chlorophyll content(Lc) and leaf water content(Lw). For validation, these measurements were compared with the ranks of holistic tree vigor condition, which were visually assessed using a 4-point grading scale based on the expert's knowledge. As a result, the measures of each evaluation item successfully highlighted a variety of aspects in tree vigor condition, including the states of both photosynthetic and non-photosynthetic parts. The variation in the results depending on evaluated parts was shown within an individual tree, even though the broad agreement among the results was found. The result of correlation analysis between the tested measurements and 4-point visual assessment, demonstrated that the state of water-stressed foliage of the season (Lw) or the development of plant materials since sapling phase (Vol) could be better viewed from the outer appearance of trees than other symptoms. But only based on the visual assessment, it may be difficult to detect the quality of photosynthesis (Lc) or the recent trend in growth of trees (Gc). To make this methodology simplified for the broad-scale application, the tested eight measurements could be integrated into two components by principal component analysis, which was labelled with 'the amount of plant materials' and 'vigor trend', respectively. In addition, the use of these quantitative and multi-scale indicators underlies the importance of assessing various aspects of tree vigor condition, taking into account the response(s) on different time and spatial scale of pressure(s) shown in each evaluated module. Future study should be advanced for various species at diverse developing stages and environment, and the application to wide areas at a periodic manner.

• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2003

SMAS(Superior Mesenteric Artery Syndrome) is a disease caused by a chronic obstruction of the duodenum(transverse portion), which is hardly detectable. However, it is known that when the superior mesenteric artery and abdominal aorta form a narrow angle, that the transverse portion of the duodenum is pressed down between the superior mesenteric artery and the abdominal aorta, and that this can lead to obstruction of the duodenum. Measuring this angle is a complicated job using conventional angiography, and results often turns out to be inaccurate. In addition, no attempt has been made to determine the value of this angle in Koreans. In this study, we conducted abdominal CT angiography using MIP(maximum intensity projection) on patients with no clinical evidence of SMAS in order to determine the angle at which the superior mesenteric artery branches from the abdominal aorta by using PC based software(Rapidia ver. 1.2) for the image reconstruction. Accordingly, we found that the mean angle between the abdominal aorta and the superior mesenteric artery was $50.05{\pm}15.87^{\circ}$ on average, and that the angle in men($53.64{\pm}16.57^{\circ}$) is higher than in women($46.46{\pm}14.98^{\circ}$). We hope that the angles determined by our study will serve as an important indicator for detecting SMAS.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.323-350
• /
• 2012

This study analyzes the efficiency of 25 shipping companies in Korea over the period 2005-2009, using Data Envelopment Analysis (DEA). Among 31 companies that listed in order of decreasing sales volume for the period 2006-2010, the sample companies has been selected on the ground of data availability. This study computes the companies' efficiency, estimates their year-on-year Malmquist productivity index, and analyzes the cause leads to the changes in the productivity, In particular, this study attempts, by dividing the companies into two group, listed or not, to compare the changes in the productivity and analyze the reasons. The results from static analysis based on CCR and BCC model indicate that listed companies are higher efficient than unquoted companies. The results from tests on the productivity changes based on the Malmquist productivity index show that 19 unquoted companies increase their average productivity by 16.2 percent year after year during the period but 6 listed companies increase by 0.5% during the same period.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.6
• /
• pp.528-535
• /
• 2009

Background: Dust clouds blown by the wind from the arid deserts of Mongolia and Northeast China are known as Asian dust storms. Ambient particulate matter with a diameter <10 ${\mu}m$ ($PM_{10}$) is associated with the exacerbation of respiratory diseases and increased mortality of heart and lung disease patients. The fibrotic effects of $PM_{10}$ of Asian dust to pulmonary fibroblast cells are unknown. This study examined the production of reactive oxygen species (ROS), TGF-${\beta}$, NF-${\kappa}B$, PDGF-$\alpha$ and Fibronectin in fibroblasts exposed to Asian dust particles. Methods: Air samples were collected using a high volume air sampler (Sibata model HV500F) with an air flow of 500 L/min for at least 6 hours. The MRC-5 cells were exposed to 0, 50 and 100 ${\mu}g/mL$ of $PM_{10}$ for 24 hours. ROS was detected by measuring the level of oxidized DCF using FACS. TGF-$\beta$, NF-${\kappa}B$, PDGF-$\alpha$ and fibronectin were detected by western blotting. Results: There was no increase in the ROS, TGF-$\beta$ and PDGF-$\alpha$ levels in the MRC-5 cells exposed to $PM_{10}$. The NF-${\kappa}B$ level was higher in the MRC-5 cells exposed to 50 and 100 ${\mu}g/mL$ of $PM_{10}$ for 24 hours. The fibronectin level in the MRC-5 cells after 24 hours incubation with 50 ${\mu}g/mL$ $PM_{10}$ was significantly higher than the control group ($PM_{10}$ 50 ${\mu}g/mL$ 113.27${\pm}$8.65 of control, p=0.005). Conclusion: $PM_{10}$ from Asian dust increases the activation of NF-${\kappa}B$ and fibronectin expression in MRC-5 fibroblast cells.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.791-799
• /
• 2015

This study focuses on the algae growth restraining. Many researches on a critical damage from algae growth are published, but it is hard to find how th restrain. Abnormal algae increasing is a problem, because it makes red tides, biodeterioration, etc. Therefore this study aims to decrease the damage from algae growth. Some metal ions have been used microorganism killing materials from old times. Especially, Cu ions are highly effective. Based on these uses of the metal ions, a functional mortar which restrains algae growth is developed. The mortar contains soluble glass which dissolve in water. The soluble glass was made of Cu ions and phosphates. When the soluble glass is dissolved, Cu ions are soaked out stably from the soluble glass. Culture mediums which incubate algae were made to evaluate the developed mortar specimens. Culture mediums were filled with fresh water and sea water. Algae were incubated for fourteen days in culture mediums. The evaluating methods are measuring volume of the dissolved organic carbon and the chlorophyll. Using these two measurements, the mortar specimens are judged that can restrain algae or not. According to the result, the functional mortars of culture medium filled with fresh and sea water shows similar trend. The functional mortar for restraining algae growth performs that's role well.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.8-14
• /
• 1993

To investigate selection efficiency for protein content and hardness in a wheat breeding program, two crosses were made between soft wheat (SW) ‘Chokwang’ and hard wheat (HW) ‘Lancota’, and between HW ‘Suwon 210’ and SW ‘Atlas 66’. F2 progeny lines from the crosses were separated into 4 groups as HW + high protein (HP), HW + low protein (LP), SW + HP and SW + LP by measuring protein content and sedimentation value in F4 generation. The subsequent populations were tested for protein content, sedimentation value, mixogram pattern and bread quality. HP group selected from F4 again had a higher protein content in F5 generation than LP group, but there was no significant difference between two groups in F6 generation. In sedimentation value, the significant difference was recognizable only between the groups of HW + HP and. SW + LP. Plant based investigation in F6 revealed that the distribution pattern for protein content and sedimentation value shifted from the low to high by the four groups with the order of SW + LP, HW + LP, SW + HP, HW + HP. Such a trend was most noticeable in the progenies of the cross between ‘Suwon 210’ and ‘Atlas 66’. Mixogram pattern that shows flour characteristics differed greatly among the groups, indicating a high selection efficiency for the traits. Bread volume in F6 of HW + HP was found to be higher than that of SW + LP, only from the cross between ‘Suwon 210’ and ‘Atlas 66’.

• Journal of Pharmacopuncture
• /
• v.5 no.2
• /
• pp.120-136
• /
• 2002

Objectives : The purpose of this study is to investigate Acute and Subacute Toxicity, and Anti-cancer Effect of H Herbal-acupuncture on mice and rats. Methods : Balb/c mice were injected intraperitoneally with H Herbal-acupuncture for $LD_{50}$ and acute toxicity test. Sprague-Dawley rats were experimented in the same way for subacute toxicity test. H Herbal-acupuncture was injected into abdomen of mice having S-180 cancer cell line. Result : 1. During the test, $LD_{50}$ could not be counted since there was no expired subjects. 2. In an acute toxicity test, the loss of motility and reflex action was observed, but weight increased in the treatment group, compared with those in the normal group (P<0.05). 3. In an acute toxicity test of serum biochemical values of mice, glucose increased in the treatment group II while total cholesterol was increased in the all treatment groups (P<0.05). 4. In a subacute toxicity test, a little loss of motility and reflex action was observed in the treatment group. Weight of mice in the treatment group decreased on the 28th day. 5. In a subacute toxicity test, liver weight was decreased but lung weight of mice increased in the all treatment groups (P<0.05). 6. As a result of measuring Complete Blood Count test (CBC) of rat, HCT was decreased in treatments even though it was not significant, compared with the normal group (P<0.05). 7. In a serum biochemical value test of subacute toxicity, total protein and albumin decreased in the all treatment groups. Creatinine, glucose, GOT increased in the treatment group I compared with the control group. Alkaline phos-phatase decreased in treatment II group, compared with the control group (P<0.05). 8. Median survival time that was measured in the rats treated with sarcoma-180 cancer cell Median decreased in the treatment group, compared with the control group (P<0.05). 9. Natural killer cell activity showed significant reduction at 100:1 and 10:1 E/T ratio while it increased at 50:1 E/T ratio. It is inferred that there was an error in the experiment (P<0.05). 10. In an interleukin-2 productivity test, even though it decreased in lung cancer, and increased in abdomen cancer, but it was only a small difference (P<0.005). 11. After injecting B16F10 cell into a capillary vessel of C57BL/6 mice and generating metastasized lung cancer, the lung was examined with the naked eye. It was not possible to see metastasized cancer in the all groups on the seventh day but the cancer was viewed on the fourteenth day. The number and volume of metastasized cancer in the treatment group enlarged in the treatment group, compared with the control group. Conclusion : According to the results, H herbal-acupuncture took no effects in cancer.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1195-1207
• /
• 2020

With the development of GeoWeb technology, 2D/3D spatial information services through the web are also has been used increasingly in the application of disaster management. This paper is suggested to construct a web-based 3D geo-spatial information mapping platform to visualize various spatial information collected at the disaster site in a web environment. This paper is presented a web-based geo-spatial information mapping service plan for the various types of 2D/3D spatial data and large-volume LiDAR point cloud data collected at the disaster accident site using HTML5/WebGL, web development standard technology and open source. Firstly, the collected disaster site survey 2D data is constructed as a spatial DB using GeoServer's WMS service and PostGIS provided an open source and rendered in a web environment. Secondly, in order to efficiently render large-capacity 3D point cloud data in a web environment, a Potree algorithm is applied to simplifies point cloud data into 2D tiles using a multi-resolution octree structure. Lastly, OpenLayers3 based 3D web mapping pilot system is developed for web visualization of 2D/3D spatial information by implementing basic and application functions for controlling and measuring 3D maps with Graphic User Interface (GUI). For the further research, it is expected that various 2D survey data and various spatial image information of a disaster site can be used for scientific investigation and analysis of disaster accidents by overlaying and visualizing them on a built web-based 3D geo-spatial information system.