• Resources Recycling
• /
• v.26 no.2
• /
• pp.66-70
• /
• 2017

The purpose of this research was to estimate density changes of sea sand by washing. To examine water content test, field density test, particle density test and measuring of dump regarding extracted sea sand and selling one. Measured result of mean particle density of barge and dump were $2.666g/cm^3$, $2.651g/cm^3$, respectively. Also, measured result of field density for each sea sand was $1.716g/cm^3$, $1.331g/cm^3$ on average. Converted to the volume of 1ton of each sea sand, $0.583m^3$, $0.751m^3$, respectively. Occurring to volume change approximately 28.8% on average. The mean field densities of measuring of sea sand that dump and barge were $1.398g/cm^3$ and $1.716g/cm^3$ respectively. This values indicated $0.715m^3$ and $0.583m^3$ each, when converted to the volume of sea sand 1ton. It was found that the average of 22.6% volume change occurred between the amount of sea sand and the sales volume.

• The Journal of Pediatrics of Korean Medicine
• /
• v.23 no.2
• /
• pp.131-144
• /
• 2009

Objectives : The purpose of this study is to have better data and to make efficient clinical reviews on pre-school children's growth based on two measurements; Body composition for measuring body volume and bone age for potential growth. Methods : The study was conducted with 221 children(118 of boys and 103 of girls) from three kindergartens. Body compositions(soft lean mass, body fat mass, percent body fat) were measured by bioelectrical impedance analysis, bone age was measured by bone density through ultrasonic image of calcaneus. Results and Conclusions : 1. The higher level on weight or BMI, the more averages of soft lean mass, body fat mass, percent body fat. 2. The average bone ages and bone age-chronological age were lower in under 50 percentile's group, but it was higher in upper 50 percentile's group. Also, children with high BMI had older in bone ages and bone age-chronological age. 3. The higher in height percentile based on the bone age; there were more soft lean mass. 4. The averages of bone age and bone age-chronological age were significantly decreased, the more percentiles of height according to bone age were big, they were higher than total average in under 50 percentile's group of height, lower than total average in over 50 percentile's group of height in both boys and girls. 5. The average of MPH were significantly decreased in top percentiles of children's height distribution. Also, in the upper percentiles of height distribution based on bone age were big in only boys. 6. The body compositions(soft lean mass, body fat mass, percent body fat) were related to body volume growth, which can he measured by weight or BMI. The bone age, bone age-chronological age, and MPH were related in terms of hight. The body volume growth was a little hit related with potential growth.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.727-734
• /
• 2010

As the blueberry content in batter increased, the pH of batter decreased According to the measured results about specific gravity of muffin batter, there was no significant difference among each batter including 0% 10% and 15% blueberry, while each 15% 20% and 30% dough showed significant difference (p<0.001). According to the results about general quality characteristics of muffins such as volume, weight and specific gravity, as the content of blueberry juice increased, the volume decreased. In terms of measuring specific volume, it decreased as the added amount increased According to measuring the chromaticity of muffins, as the blueberry content increased in the muffins, brightness and yellowness decreased while redness increased In terms of the measurement of texture, the hardness showed significant difference among all sample muffins (p<0.001). Significant difference was not shown in the springiness (p<0.05). As the amount of blueberry juice increased, the chewiness of the muffins was grown. The result showed a significant difference between samples in the adhesiveness (p<0.001). As the amount of blueberry juice increased, the adhesiveness of muffins also increased In the organoleptic test, a significant difference was shown in the color among all sample (p<0.001). The blueberry juice content of 20% showed highest figures with $7.12{\pm}0.67$. In terms of flavor, the content of 20% also showed highest figures among all samples with $7.16{\pm}0.62$ (p<0.001). Concerning the taste all samples showed a significant difference while 20% content did the highest figure. In the overall acceptability the content of 10% showed the lowest figure while 20% displayed the highest figure with 7.16. According to the quality characteristics of blueberry muffins, the best blueberry juice content would be 20% content group.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.577-584
• /
• 2007

Uroflowmetry is non-invasive and easily performed to diagnose benign prostatic hypertrophy(BPH) frequent in aged men. Weight change during urination is usually measured to estimate the urinary flow rate by a load cell, but sensitive to any impacts against the bottom of the container, leading to unnecessary noise generation. Moreover, load cells are relatively expensive raising the production cost. The present study proposed a new technique, measuring hydraulic pressure on the bottom of the urine container to evaluate the urinary volume. Low cost pressure transducer enabled almost perfectly linear relationship between the urine volume and the hydraulic pressure. During both the simulated and human urination experiments, variance of the pressure signal was more than 50% smaller than the weight signal acquired by a load cell, which demonstrated that the impact noise was decreased to a great degree by pressure compared to weight measurement.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.2
• /
• pp.76-80
• /
• 2011

PURPOSE. Implant stability quotient (ISQ) values have been supposed to predict implant stability. However, the relationship between ISQ values and bone-to-implant contact ratio (BIC%) which is one of the predictors of implant stability is still unclear. The aim of the present study was to evaluate initial ISQ values in relation to BIC% using rabbit model. MATERIALS AND METHODS. Four New Zealand white rabbits received a total of 16 implants in their tibia. Immediately after implant placement ISQ values were assessed. The measurements were repeated at the time of sacrifice of the rabbits after 4 weeks. Peri-implant bone regeneration was assessed histomorphometrically by measuring BIC% and bone volume to total volume values (bone volume %). The relationships between ISQ values and the histomorphometric output were assessed, and then, the osseointegration prediction model via the initial ISQ values was processed. RESULTS. Initial ISQ values showed significant correlation with the BIC%. The bone volume % did not show any significant association with the ISQ values. CONCLUSION. In the limitation of this study, resonance frequency analysis is a useful clinical method to predict the BIC% values and examine the implant stability.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1055-1062
• /
• 2004

As for the Production of internal combustion engines there has been further movement toward development of high Performance engines with improved fuel efficiency as well as a lightweight and a small size. These tendencies help to solve the problems in engines for example, such as thermal load. abnormal combustion and so on. In order to investigate these Problems, a thin film-type probe for measuring instantaneous temperature has been suggested. A method for manufacturing such a probe was established in this study The instantaneous surface temperature of a constant volume combustion chamber was measured by using this probe and the heat flux was obtained through Fourier analysis In order to thoroughly understand the characteristics of combustion. authors measured wall temperature of combustion chamber and calculated heat flux through a cylinder wall while varying the protrusion height of probe. For these Purposes, the instantaneous surface temperature probe was developed. thereby making possible the analysis of instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Fisheries and Aquatic Sciences
• /
• v.13 no.4
• /
• pp.308-314
• /
• 2010

Larvae of Palaemon serrifer were reared in the laboratory under three different temperature regimes ($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$) to study the effects of rearing temperature on larval survival and growth, as well as other traits such as embryo volume, number of embryos (fecundity), incubation period, development. Mode and development period. Growth pattern was analyzed by measuring the molt increment and intermolt period. The intermolt period consistently increased with size and instar number and was shortest at $25^{\circ}C$. However, molt increments generally decreased with instar number. Number of embryos varied from 552 to 1355. The relationship between the number of embryos and carapace length was expressed by the equation (fecundity) y=2.7744x+0.208 ($R^2$=0.7961). Egg volume was a primary factor affecting other life-history traits. Egg volume was $0.078\;m^3$, which is relatively small thus embryos exhibited a relatively short incubation period and a comparatively short development period, and the nutritional mode was planktotrophic. Brood production was followed by a fast parturitional pattern. Most ovigerous females had mature ovaries when the parturial molt occurred soon after eclosion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.106-109
• /
• 2007

The spray plume characteristics of liquid water jet injected into subsonic cross-flow at 42 m/s were experimentally investigated. Nozzle has a 1.0 m diameter and L/D=5. Droplet sizes, velocities, volume flux were measured at each downstream area of the injector exit using phase Doppler particle anemometry. Measuring probe position is moved with 3-way transversing machine. Experimental results indicate that SMD is varied from 75 to $120{\mu}m$ distribution and it is uncertain layer structure. SMD peaks at the top of the spray plume. This phenomenon is related to the momentum exchange between column waves and cross-flow stream. Droplet vector velocities were varied from 11.5 to 33 m/s. A higher-velocity region can be identified in down edge region at Z/D : 40, 70 and 100. Lower-velocity region were observed on bottom position of the spray plume. Volume flux is a criterion to the droplet concentration. All volume flux distribution has a same structure that continuously decreases from the center region to the edge of the plume. Z/D : 20 is spatially less concentrated than in Z/D : 100.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.4
• /
• pp.216-223
• /
• 2003

In the production of internal combustion engines, there have been trends to develop the high performance engines with improved fuel efficiency, lighter weights and smaller sizes. This trends help to answer problems related to thermal load and abnormal combustion, etc. in these engines. In order to investigate these problems, a thin film-type probe and its manufacturing method for instantaneously measuring surface-temperatures have been proposed in this study, Instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and heat flux was obtained by Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe have been measured. To achieve the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.243-253
• /
• 2022

Spent filters with a high radiation dose rate of 2 mSv·hr^-1 or more are not easily managed. So far, the Korean policy for spent filter disposal is to store them temporarily at nuclear power plants until the waste filters can be easily managed. Nuclear power plant decommissioning in Korea is starting with Kori unit 1. Volume reduction of waste generated during decommissioning can reduce the cost and optimize the space usage at disposal site. Therefore, efficient volume reduction is a very important factor during the decommissioning process. A conceptual method, based on the experiences of developing 200 and 800 ton compactors at Orion EnC, has been developed considering worker exposure with the followings a crusher (upgrade of compaction efficiency), an automatic dose measuring system with a NaI(Tl) detector, a shield box, an inner drum to prepare for easy handling of drums and packaging, a 30 ton compactor, and an automatic robot system. This system achieves a volume reduction ratio of up to 85.7%; hence, the system can reduce the disposal cost and waste volume. It can be applied to other types of wastes that are not easily managed due to high dose rates and remote control operation necessity.