• 한국초등과학교육학회지:초등과학교육
• /
• 제27권4호
• /
• pp.341-355
• /
• 2008

The purpose of this study was to analyze the measuring abilities of elementary school students by using a microgenetic method. The participants were seven elementary students in the fourth grade. To analyze their measuring abilities, students attended three physical quantities measuring tasks such as length, volume, and time task by six times. Results were as follows. First, in the measuring length task, students selected appropriate measuring instruments but they didn't consider measuring amounts. And as their measuring experience increased, they desirably improved management abilities of measuring instruments. In the measuring volume task, they dealed with measuring instruments, but not very well. And these tendency were maintained. In the measuring time task, they were not measure exactly. Second, as their measuring experience increased, their ability to read the scale marks improved. However, they had difficulties in estimating the volume between scale marks. Results indicate that, elementary students need to basic education about measuring instruments, their usage, and scale reading ability for their science experiment courses in schools.

• 한국과학교육학회지
• /
• 제17권2호
• /
• pp.127-137
• /
• 1997

The purpose of this study was to assess elementary student's ability of measuring length, area, and volume and reading metric scales. The findings of this study were as follows. All students were successful in measuring without scale, regardless of grades. But they were less successful in measuring the task using standard and nonstandard scales. Especially, in measuring area, lower grade students were not able to perform the task using nonstandard instruments, but higher grade students were able to perform the task. Measuring area using grade paper was least successful for sixth graders. In measuring volume, students under fifth grade read the upper scale when using graduated cylinder. In measuring by direct comparison, students were more successful in measuring length than in measuring area and volume using given material. The use of given nonstandard material was successful for 4th, 5th, and 6th grade students. In measuring using metric scale, lower grade students did not pay attention to the zero of the scale, but just read the end point. Higher grade students considered both zero and end points.

• 동아시아식생활학회지
• /
• 제4권1호
• /
• pp.1-18
• /
• 1994

This study is designed to delve into the measuring systems of different periods so as to help with more exact representations of cultures of different periods. The basis of the measuring system in china stems from the huangjong (Huangzhong : the yellow bell) of the period of Huangdi, the length of the bell being the width of 90 black millet grains. Do (Du : width) ; 1 bun=the width of one black millet grain, 1 Chon=10 Buns, 1 Chuk=10 Chons, 1 Jang=10 Cheoks, 1 In=10 Jangs. Ryang (Lyang : volume) ; 1 Yak=the weight of 1,200 grains in the yellow bell, 1 Hab=2 Yaks, 1Seung=10 habs, 1 Du=10 Seungs, 1 Gok=10 Dus. Hyung (Hung : weight) ; 12 Jus=the weight of 1 Yak, 1Yang=24 Jus are equal 1 Hab in weight, 1 Geun=16 Ryangs, 1 Jo=30 Geuns, 1 Seo=4 Jo. In the era of Eun (In) it was decided that the 9-chon length of the Yellowbell shall be 1 Cheok. The Cheok of Ju was set at 4/5 of the length of the yellow bell. The Cheok of Ju breaks into Yongjocheok, Joryegicheok, Pogeumcheok. Yongjocheok, arising from Rohbancheok of the Ju period, is part of Gokcheok also used as a measuring tool for wooden works. The Han cheok has the same length as the yellow bell. The Sang Cheok is 4/5 of the length of the yellow bell. The Tang Cheok was originally the same as the Sang cheok but became longer and longer to be the Long cheok (31.3cm). The length-measuring system used in the three-nation era of Korea includes the gijeom cheil (35.52cm), Ju cheok (25.45cm), sunje Cheok (23.5cm), the Long Tang Cehok (29.706 cm), making 10 Bun 1 Chon and 10 Chon 1 Cheok. The volume-measuring system(Seung) was 198.81 ㎤ before 681 BC in the shilla Dynasty and was 596.42 ㎤ after that. In the seventh year of Kng Munjong of the Koryo dynasty the standard measuring system with the Long Tang Cheok as its basis was adopted, and the standard volume-measuring tools were used under the name of Migok, Daesodugok, Mijangdu, (29.706 cm), making 10 Bun 1 Chon and 10 Chon 1 Cheok. The volume-measuring system(Seung) was 198.81㎤ before 681 BC in the shilla dynasty and was 596.42 ㎤ after that. In the seventh year of King Munjong of the Koryo dynasty the standard measuring system with the Long Tang Cheok as its basis was adopted, and the standard volume-measuring tools were used under the name of Migok, Daesodugok, Kijangdu, Habseung and gokseok. The 1 Seung volumes of theses toolas were 596,447,927 and 1053㎤, respectively. were called Migok, Daesodugok, Mijangdu, Habseung and Gokseok, being respectively 596,447,927, 1053 ㎤, respectively. In the Chosun Dynasty the length of the Yeongjocheos was 27.6 cm or 31.220 in the Sejong era, 29.8 from Heonjong through Gojong, and 30.3 cm after the 6th year of King Kwangmu, and the volume of Du(Mal) also changed like 4.121 or 5.964, 5.187, 23.08 $\ell$, and the 1-Jeonjung also changed like 2.66 or bout 4, 3.45, 3.75 in line with the changes of the length system.

• 열처리공학회지
• /
• 제16권4호
• /
• pp.211-215
• /
• 2003

In this work, a new way of measuring the volume fraction of e martensite in Fe-based alloys has been proposed. Since the specific volume of ${\varepsilon}$ martensite, depending on alloy composition, is smaller than that of austenite i.e ${\gamma}$ phase, volume expansion takes place during ${\varepsilon}{\rightarrow}{\gamma}$ reverse transformation. As the amount of the volume expansion is proportional to the product of specific volume difference times the volume fraction of ${\varepsilon}$ martensite, the volume fraction of ${\varepsilon}$ martensite can be calculated by measuring the volume expansion and the specific volume difference. Such a relationship was confirmed in Fe-21Mn and Fe-32Mn-6Si alloys which undergo ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation on cooling and by cold rolling, respectively. It was also found that the former has isotropic ${\varepsilon}$ martensite while the latter has anisotropic ${\varepsilon}$ martensite.

• 대한공간정보학회지
• /
• 제15권1호통권39호
• /
• pp.55-59
• /
• 2007

본 연구의 목적은 DGPS와 음향측심기를 장착한 소형의 로봇선을 이용하여 저수지의 수심정보를 획득하고 이를 이용하여 담수량을 산정하는데 있다. GPS와 음향측심기를 장착한 로봇선은 무선 인터넷을 이용하여 원격으로 제어된다. 현장실험 결과, 기존의 담수량 데이터와 로봇선의 데이터를 이용하여 산정된 담수량은 6.8% 정도의 차이를 나타냈으며, 이는 저수지 바닥의 퇴적물 때문인 것으로 판단된다. 본 연구에서 개발된 원격측정 로봇선은 수심 및 하상지형 정보를 경제적으로 정확하게 획득하는데 효과적으로 이용될 수 있을 것으로 기대된다.

• 대한가정학회지
• /
• 제49권5호
• /
• pp.1-10
• /
• 2011

To provide the basic data to manufacture superior brassiere, this study was analyzed the evaluation of wear sensation of brassiere and the satisfaction of breast type by breast circumference and volume of 182 twenties-aged women. The results were as follows: First, it was reliable to set up the cup size of brassiere by using the breast circumference. Hemispherical breast was the same as cone-shaped breast in breast classification by breast circumference and volume. Second, the breast sizes were able to classify into under 200cc, 200~300cc, 300~400cc, and over 400cc by volume, but measuring the volume was more difficult than measuring the breast circumference. Last, there were correlations between breast circumference and breast volume by breast type. And there were differences on improvement, brassiere size, and the satisfaction of breast type by breast circumference and volume. This results will give basic informations for brassiere design that reflects breast type according to breast circumference and volume for functional brassiere.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.603-615
• /
• 2016

In this study, in order to determine the validity and accuracy of MR imaging of 3D gradient dual echo 2-point DIXON technique for measuring abdominal adipose tissue volume and distribution, the measurements obtained by CT were set as a reference for comparison and their correlations were evaluated. CT and MRI scans were performed on each subject (17 healthy male volunteers who were fully informed about this study) to measure abdominal adipose tissue volume. Two skilled investigators individually observed the images acquired by CT and MRI in an independent environment, and directly separated the total volume using region-based thresholding segmentation method, and based on this, the total adipose tissue volume, subcutaneous adipose tissue volume and visceral adipose tissue volume were respectively measured. The correlation of the adipose tissue volume measurements with respect to the observer was examined using the Spearman test and the inter-observer agreement was evaluated using the intra-class correlation test. The correlation of the adipose tissue volume measurements by CT and MRI imaging methods was examined by simple regression analysis. In addition, using the Bland-Altman plot, the degree of agreement between the two imaging methods was evaluated. All of the statistical analysis results showed highly statistically significant correlation (p<0.05) respectively from the results of each adipose tissue volume measurements. In conclusion, MR abdominal adipose volumetry using the technique of 3D gradient dual echo 2-point DIXON showed a very high level of concordance even when compared with the adipose tissue measuring method using CT as reference.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.776-779
• /
• 1987

This paper describes a technique for measuring the volume of a pile of powder in a visual way. The volume of a fragile object whose shape is easily transformed by a slight touch of another object must be measured without any contact with it. This can be achieved by applying a three-dimensional shape reconstruction technique employed in computer vision. We have developed a measurement system that finds the volume of a pile of powder by employing a range finder, and performed an experiment of determining the volume of PVC powder piled on a table. The result of the experiment was satisfactory.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1986-1993
• /
• 2003

The spatially resolved spray volume fractions from both line-of-sight data of direct measuring cells and a laser diffraction particle analyzer (LDPA) are tomographically reconstructed by the Convolution Fourier transformation, respectively. Asymmetric sprays generated from a twin-hole injector are tested with 12 equiangular projections of measurements. For each projection angle, a line-of-sight integrated injection rate was measured using a direct sampling method and also a liquid volume fraction from a set of line-of-sight Fraunhofer diffraction measurements was measured using a light extinction method. Interpolated data between the projection angles effectively increase the number of projections, significantly enhancing the signal-to-noise level in the reconstructed data. The reconstructed volume fractions from the direct sampling cells were used as reference data for evaluating the accuracy of the volume fractions from the LDPA.

• 한국과학교육학회지
• /
• 제20권1호
• /
• pp.1-11
• /
• 2000

본 연구에서는 초 중등 학생들의 눈금 읽기 능력과 측정도구의 용도 및 단위에 대한 개념을 조사했다. 초등학생 72명, 중1 학생 69명, 중3 학생 80명의 학생을 대상으로 수행 평가 및 지필 평가를 실시했다. 눈금읽기 능력을 평가하기 위해서 개별 수행 평가를 실시했는데, 학생 개개인은 서류 봉투의 가로 세로 길이, 물의 온도, 물의 부피 등을 실험실에서 주로 사용하는 주어진 측정 도구를 사용하여 측정했다. 측정 도구 및 단위와 관련된 개념을 평가하기 위해서는 그림과 사진이 그려진 질문지를 사용했다. 눈금 읽기 능력 면에서 각 학년마다 적지 않은 측정오차를 내는 학생이 있음이 드러났으며 특히 질량이나 부피 측정의 경우 그 수가 더욱 증가했다. 측정 도구에 대한 학생의 개념 조사 결과 학생들은 물리량 개념이 정확하지가 않아 측정 도구가 측정할 수 있는 물리량을 제대로 지적하지 못했다. 또한 단위에 대해서도 혼동이 있어서 특히 질량, 무게, 부피나 힘의 단위 등을 어려워하고 있음을 알 수 있었다.