• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.4
• /
• pp.87-99
• /
• 2020

PURPOSE: This study examines the therapeutic effect of functional adjustment procedure therapy (FAPT), by comparatively analyzing behavioral disorders due to shoulder pain and subjective pain intensity subsequent to therapy, in patients with shoulder pain. METHODS: The intervention was performed on 48 employee patients with shoulder pain, Patients were administered 16 sessions of FAPT for 8 weeks, twice a week for 30 minutes per session. This study applied the neck pain and disability scale (NPDS) as a measurement tool, and used the questionnaire to measure subjective pain intensity to investigate the difference before and after administering FAPT to employee patients with shoulder pain. RESULTS: Statistically significant difference was obtained between the mean difference in shoulder pain disorder, before and after FAPT. Assessing gender and age differences in the reduction effect of shoulder pain, showed significant difference in 8 of the 10 factors examined. Finally, examining the difference in the effect of reducing subjective shoulder pain by gender and age, we observed that gender-based disability reduction was significant for all 12 factors examined. CONCLUSION: Taken together, the results of this study, validate the therapeutic efficacy of FAPT for patients with shoulder pain. We believe that this data will provide basic information to understand the health conditions and psychological variables of patients with shoulder pain.

• Explosives and Blasting
• /
• v.36 no.3
• /
• pp.10-18
• /
• 2018

The dynamic behaviour of the rock mass under the dynamic load is different from the static application of the maximum load of the same size. An experimental approach to investigating rock behavior under dynamic loads is more difficult than that under static conditions in control of dynamic loads, measurement and analysis of the results. Numerical methods are less constrained by performing the experiments numerically, rather than experimental ones, so they can be very powerful analytical tool at the design stage. However, even if the algorithms of the analysis method are appropriate, careful analysis is required because the calculation results may vary largely depending on input data and boundary conditions. In this paper, when investigating the behavior of rock structures under dynamic load numerically, the effects of boundary conditions, dynamic load and calculation time step, and dynamic load characteristics on the calculation results were reviewed to provide guidance on setting up boundary conditions and calculation time step related to dynamic analysis.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.123-128
• /
• 2001

The creep constants which are used to the reference stress equations of creep damage were obtained to type 316LN stainless steel, and their determining methods were described in detail. Typical Kachanov and Rabotnov(K-R) creep damage model was modified into the damage equations with reference stress concepts, and the modified equations were applied practically to type 316LN stainless steel. In order to determine the reference stress value, a series of high-temperature tensile tests and creep tests were accomplished at $550^{\circ}C$ and $600^{\circ}C$. By using the experimental creep data, the creep constants used in reference stress equations could be obtained to type 316LN stainless steel, and a creep curve on rupture strain was predicted. The reference stress concept on creep damage can be utilized easily as a design tool to predict creep life because the process, which is quantified by the measurement of voids or micro cracks during creep, is omitted.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.25 no.3
• /
• pp.155-164
• /
• 2018

Purpose: The purpose of this study was to identify the influences of health beliefs on fall prevention behavior among adult patients who had abdominal surgery. Methods: Data were collected from 136 patients who had undergone an abdominal surgery within the past 5 days. The data collection period was from September 21 to October 25, 2017. The health belief measurement tool, modified and reviewed by experts, and the fall prevention guideline developed by the Korean Nurses Association and revised by Park were used. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson correlation and stepwise multiple regression analysis. Results: The Health Belief Model explained 45.7% of the variance in fall prevention behavior among adult patients who had abdominal surgery. Perceived susceptibility and perceived benefits had significant influence on fall-prevention behavior. Conclusion: Tailored educational programs which put emphasis on the perceived susceptibility and perceived benefits of fall prevention need to be developed.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.1
• /
• pp.19-26
• /
• 1991

Ames test using special strains which are histidine requiring mutant of Salmonella typhimufium , is widely utilized as short-term bioassay to evaluate the genotoxicity of chemicals. This method requires the liver microsome(5-9 fraction) to provide mammalian metabolism of the compounds, Therefore, the mutagenic potency of the chemicals is affected by not only the intrinsic properties of them but also the efficiency of the in vitro microsomal activation system. For this reason, the complex mixtures such as environmental pollutants from occupational sources, natural products or cigarette smoke condensates(CSC) , might be often appeared the false results. Induction of sister chromatid exchange(SCE) in cultured cells is known as another sensitive and powerful tool for the measurement of genotoxicity and the method has also an advantage which is able to apply to the in vitro and in vivo systems. In the present study, the inducibilities of revertant colonies in tester strain TA98 and SCE in human Iymphocytes by positive controls and total particulated materials(TPM) obtained from various brand(domastic and imported) cigarettes were compared in order to investigate whether the results in Ames test are in agreement with those in SCE analysis. The mutagenic activities of well known mutagens such as B(a)P showed excellent dose-response in the both methods although the induction mechanism was different each other, but cyclophosphamide resulted such effect only in SCE analysis. Most TPM tested showed a similar pattern in the mutagenic activities in those methods. However, only two(one imported brand and one domestic sample cigarettes) among the TMP obtained from various cigarettes appeared the higher induction in SCE than Ames test.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.111-116
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, and it has been developed to a wire-line system at their second generation. The current up-to-date system is more compact and is able to be operated by all-in-one system. With a progress in a hardware system, the software for analyzing in-situ stress regime has also been progressed. The shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.63-69
• /
• 2003

As increasing underground facilities, more effective management is needed nowadays. It is important to get an accurate information of underground facilities to manage that, so some methods of detecting location - electromagnetic induction method, ground penetration radar method, sound wave method - are used to obtain the information of underground facilities. In this study, a magnetic method to detect underground facilities was developed. In the magnetic method, underground facilities are detected by a detector and the magnetic marker which is a permanent magnet and used to marking the location by attaching underground facilities. A test field was constructed for experiment with the magnetic marker, PVC pipe, and steel pipe under ground 1.5m, and a ferromagnetic detector was used for measurement. Magnetic strengths of the magnetic marker were measured by the detector at each location in the test field, and analyzed by magnetic field analysis tool in the same condition. In the result, the underground pipes of 1.5m below were detectable within the deviation $\pm$0.2m. When For applying this method, it should be considered that ferromagnetic materials around the detector could affect a measured value.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.85-91
• /
• 2014

The rotation of a spindle unit must be accurate for high-quality machining and to improve the quality of the machine tools. Therefore, the proper measurement of the rotation accuracy and ensuring a proper analysis are very important. Separate processes are necessary because spindle errors and roundness errors associated with the test balls can both factor into the measured rotation error values. We used three methods to discern test ball errors and analyzed which could be deemed as the most proper technique in a test of the rotation accuracy of the main spindle of a machine tool.

• The Journal of Korean Medicine
• /
• v.34 no.3
• /
• pp.153-159
• /
• 2013

Objectives: This study was designed to find the effect of Oriental medicine music therapy (OMMT) on elementary school children's concentration. Methods & Results: OMMT as a study tool has several programs, including playing the musical instruments and listening to the music. The measurement tools of the study were Harris & Harris' grid and visual analogue scale (VAS) for overall condition. As a result, the score of Harris & Harris' grid increased from $12.94{\pm}8.20$ to $15.24{\pm}8.74$ (P=0.032) and VAS for overall condition increased from $74.85{\pm}27.37$ to $92.35{\pm}24.10$ (P=0.002) Conclusions: This case series showed that OMMT might be an effective treatment to improve elementary school children's concentration.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.904-914
• /
• 2011

The volumetric errors of CNC machining centers are determined by 21 errors, including 3 linear errors, 6 straightness errors, 3 perpendicular errors, 9 angular errors and non-rigid body errors of the machine tool. It is very time consuming and hard to measure all of these errors in which laser interferometer and other parts are used directly. Hence, as many as 21 separate setups and measurements are needed for the linear, straightness, angular and perpendicular errors. In case of the 5-axis machining centers, two more rotary tables are used. It can make 35 error sources of the movement. Therefore, the measured errors of multi movements of the 5-axis tables are very complicated, even if the relative measured errors are measured. This paper describes the methods, those analyze the error sources of the machining centers. Those are based on shifted diagonal measurements method (SDM), R-test and Double ball bar. In case, the angular errors of machine are small enough comparing with others, twelve errors including three linear position errors, six straightness errors and three perpendicular errors can be calculated by using SDM. To confirm the proposed method, SDM was applied to measuring 3 axes of machine tools and compared with directly measurement of each errors. In addition, the methods for measuring relative errors of multi-axis analysis methods using R-test and Double Ball Bar are introduced in this paper.