• 패션비즈니스
• /
• 제16권1호
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• 복식문화연구
• /
• 제17권2호
• /
• pp.203-215
• /
• 2009

The purpose of this study was to investigate current garment sizes of women's formal jackets, targeting plus-size women in online shopping malls, and to identify effective size information involved in online apparel purchase behaviors to overcome the short comings of current garment sizes from the perspectives of consumers. Basic 88 size formal jackets from the seven companies found on the 22 websites were collected and analyzed. The data were collected from March to October 2007, and analyzed using SPSS 14.0. The results were summarized as follows. First, there was no website using standard garment size labeling with 'bust-hip-height' set up by KS K 0051 among the 22 websites. Instead, all 22 websites used garment size labeling with figures such as 88, 99, 100, 110, and 120 or with letters such as L, XL, and XXL. The websites presented no body size, but listed garment size. Furthermore, the size information was presented differently, ranging from three items of bust circumference, upper arm length, and jacket length to six items of shoulder width, bust circumference, waist circumference, sleeve width, sleeve length, and jacket length. In addition, no website presented basic information for hip circumference, despite the jacket length covering the hips. Second, a total of 85.7% the websites listed bust circumferences in 88 garment sizes collected as 100cm. Shoulder widths were presented as 39cm or 37cm. Sleeve circumferences were addressed the same, 36cm, in all websites. Third, comparing the differences between guidance sizes and measurement sizes, only 28.5% of the web sites posted guidance sizes of shoulder widths the same as those of the measurement sizes. All web sites presented guidance sizes of bust circumstances as 1 to 5cm smaller than those of the measurement sizes.

• 복식문화연구
• /
• 제6권2호
• /
• pp.141-152
• /
• 1998

In the result of classification body types for 100 adult women by direct measurements and antropometric measurements, the mean of weight is bigger than he mean of weight of 97'. So modern 20's women is more than than 94'. In the result of factor analysis, 5 factors were extracted (horizontal sizes, vertical sizes, and degree of shoulder) from exponent sizes of the antropometric measurements item, and another 5 factors were extracted (thick of body, horizontal form of the torso, silhouette of the torso, and size of abdomen) from direct measurements item. The body types are classified into 4 types by cluster analysis in the result of direct measurement item, and another body types are classified into 5 types by antropometric measurement item, it was classified into the horizontal size and the shape and silhouette of torso, and by direct measurement item, it was only classified into the vertical and horizontal size. So for the patternmaking of clothing, it is more adoptable the classification of body by antropometric measurement item than direct measurement item.

• 복식문화연구
• /
• 제8권4호
• /
• pp.549-561
• /
• 2000

The purpose of this study was to survey and analyze the age classification of women customers as a target market and sizes on a label that were actually produced by each brand in Korean national brands ; they were classified into size for bodice and bottom, and compared with the distribution of national data of women's body measurement. They were analyzed and classified by brand groups of 'miss', 'missy', 'Mrs.'and 'madam', The results were ; 1) It was found that recent products for ready-made for women's clothes tend to be designed with target to the measured ages classified by the range of five or ten years. The main practice was that for 'miss'brand group the age range was of five years, and for 'missy'brand group, ten years. And for 'Mrs'and 'madam'brand groups, it was of 15 or 20 years. So that, it is necessary to design their clothes based on their features of body considering the intervals of age. 2) 'Mrs'and 'madam'groups were most remarkable for their distribution into a vast range of sizes for three control dimensions and waist girth size when compared to 'miss'and 'missy'groups. The distribution of brand size had no relation with that of body measurement, and in particular, none was produced for short height size between 145 and 150 ㎝. For tall height size between 175 and 180 ㎝, many brand sizes were distributed while body measurement was few. It means that distribution of brand size was different from real distribution of body measurement was few. It means that distribution of brand size was different from real distribution of body measurement as a result that the larger the bust girth in such cases over 160 ㎝, the larger the size of hip girth. Even as for the height 155 and 160 ㎝ in which body measurement is concentrated, there were many problems because while sizes of 'large'bust girth and 'small'hip girth had a large distribution, their clothes were not produced.

• 한국의류학회지
• /
• 제39권5호
• /
• pp.695-702
• /
• 2015

This study provides basic data that are helpful to prepare a sizing system for dress shirts that improves the wearer's size fitness. The 16 different parts of the dress shirts were measured for 24 pieces of dress shirts with three kinds of size (95, 100 and 105) among the eight different brands on the market. The measurement sizes of the dress shirts analyzed the accuracy of the size information, size classification by size designation, and differences of size by brand. The results of the study were: 1. The size information of dress shirts differed from customer demand. 2. The size increments between size designations differed from each other even though measurement sizes of the dress shirts increased as the size designation increase. 3. Measurement sizes of the dress shirts were different between brands even for dress shirts of the same size designation. It is necessary that manufacturers secure an accurate and standardized sizing system and provide accurate information for the measurement sizes of dress shirts on an online shopping mall.

• 한국지역사회생활과학회지
• /
• 제20권4호
• /
• pp.571-578
• /
• 2009

This study was to apply the measurement variations of each region of the body to the basic bodice pattern grading and to provide the clothing pattern fit for the human body. Grading variation used in the apparel industry was researched and new grading variation was proposed by analyzing the statistical data of body measurements. The statistical variation in body measurements was applied to set the optimum grading region and variation. Five sizes were used by split grading method and drawn with Bust Circumference and waist length based on the middle size. Differences between the grading pattern and the drawing pattern were analyzed by overlapping them and measuring each region. The measurement variations of drawing patterns between the sizes were very different from those of statistical data. On the other hand, the measurement variations of grading patterns between the sizes and those of statistical data were similar. In summary, the grading pattern by applying the measurement variations to the region of the body was superior to the drawing pattern drawn by the basic measurements for clothing fitness.

• 한국의류학회지
• /
• 제29권6호
• /
• pp.764-771
• /
• 2005

This study is to increase the efficiency for the suitability of clothing measurement and the production utility factors by setting up the measurement system with middle-aged men's physical characteristics. For this purpose this study measured the body sizes of middle-aged men and analyzed basic sizing items such as drop, height, and bust according to the ISO and KS systems and classified these sizes based on body shapes and heights. As a result, an internationally-compatible measuring system is presented in this study. The most common body shapes are portly (Drop 6) and regular (Drop 12) types and these two types form $74.7\%$. The height of 164cm$(31.2\%)$ and 170cm$(38.2\%)$ cover $69.4\%$; and the most general sizes of busts are 92, 96 and 100 and these sizes occupy $74.7\%$. In consideration of the ranges of height and bust, the general sizes (7 regular types and 9 portly types) are selected to present the standardized measurements; the mark for the top is height-bust-waist and the mark for the bottom is stature-waist-hip.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.227-232
• /
• 2016

3D 인체형상자료는 인체 적합성이 우수한 제품과 생활공간을 만들기 위해 다양한 분야에서 활용되고 있다. 본 연구는 한국인 인체치수조사 보급사업에서 2013년에 수집한 청소년층 3차원 측정 자료를 기반으로 한국 청소년의 대표 인체치수를 산출하고 대표 인체치수와 가까운 3D 인체형상자료를 선별하는 방법을 제공한다. 먼저 여러 측정항목으로 이루어진 다차원 벡터공간을 요인분석을 통해 둘레성분과 길이성분의 2차원 벡터공간으로 투영하였다. 다음으로 2차원 성분공간에서 마할라노비스 거리를 이용하여 대표 인체치수와 이에 가까운 3D 인체형상자료를 선별하였다. 2차원 성분공간에 나타난 청소년기의 성장패턴을 고려하여 남자는 4개의 연령그룹으로 여자는 3개의 연령그룹으로 구분하였다. 성분점수 계수행렬의 열벡터에 대응하는 고유형상을 이용하여 남자는 13개 측정항목, 여자는 14개 측정항목에 대한 대표 인체치수를 연령그룹별로 계산하였다. 여기서 구한 대표 인체치수와 3D 인체형상자료는 3차원 대표 형상을 만드는 데에 매우 유용하다.

• 복식
• /
• 제55권2호
• /
• pp.116-128
• /
• 2005

The aim of this study is to understand problems with both fit and sizing system of gloves by analyzing the glove production industries with an emphasis on the sizing system, production measurement system, and general marking situation. Also, to suggest the basic raw materials for improving sizing system for gloves, actual glove control sizes were compared to the anthropometric data of the previous study Fifteen domestic production companies were participated in this study-Domestic glove production companies established their own sizing system by copying inter-national brand's glove sizing system or by their experience. The Korean Standard of gloves and the 1997 Korean Standard Anthropometrics Measurement for producing glove patterns are not considered because of its discordance with the reality of the required measurements. Domestic glove production companies used different size designation and labeling system. Size measurement unit also showed difference among the glove production companies. Some companies used 'cm', some used 'mm', some used 'inch' for the measurement unit. In general, companies produced 5 to 4 sizes in one design of glove and the production was the highest in M and L size. In 9 out of 15 companies preferred control size as hand length and hand circumference. For reference size, most of the companies preferred finger circumference, finger length, palm length, hand breadth, crotch height, and hand thickness. Actual glove sizes were compared to the anthropometric data of the previous study. The results indicated that most of the measurements of actual glove sizes were significantly larger than the anthropometric data.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.265-268
• /
• 2005

A new method for measurement of the pore size in a nanohoneycomb structure using atomic force microscopy (AFM) was proposed. Porous type anodic aluminum oxide (AAO) was fabricated as a nanohoneycomb structure to measure the pore size. For measuring pore sizes from AFM images, a criterion was set in porous type AAO. The pore sizes from AFM images were compared with those from SEM images, and the results showed good agreement. The relationship between the pore size and widening time was found to be linear in the range of this study. It was understood as the synchronized effects of the impurity gradient in outer oxide of AAO, mechanical packing and mass transfer increase.