• 제목/요약/키워드: measurement set

검색결과 1,825건 처리시간 0.03초

페이저 측정 시스템의 측정기 최적배치 (Meter Optimal Placement in Measurement System with Phasor Measurement Unit)

  • 김재훈;조기선;김회철;신중린
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 C
    • /
    • pp.1195-1198
    • /
    • 1999
  • This paper presents optimal placement of minimal set of phasor measurement units(PMU's) and observability of measurement system with PMU. By using the incidence matrix symbolic method which directly assigns measurement and pseudo-measurement to incidence matrix, it is much simpler and easier to analyze observability. The optimal PMU set is found through the simulated-annealing(SA) and the direct combinational method. The cooling schedule parameter which is suitable to the property of problem to solve is specified and optimal placement is proven by presented direct combinational method. Search spaces are limited within reasonable feasible solution region to reduce a unnecessary one in the SA implementation based on global search. The proposed method presents to save CPU time and estimate state vectors based on optimal PMU set.

  • PDF

평면 플레이트 형상을 가진 탈선계수 측정용 윤축의 구조해석 (Finite Element Analysis of Wheel-set for Derailment Coefficient Measurement that have Plane Plate Shape)

  • 함영삼;오택열
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.119-122
    • /
    • 2004
  • Since a derailment of rolling stocks results in huge losses in properties and lives, the measurement of a derailment coefficient is a very important test item to estimate the running safety of rolling stocks. For a measurement of the derailment measurement of forces between the wheel and rail a measuring wheel-set should be made first. The process to make a measuring wheel-set has some stages for correct measurement. They are as follows; a finite element analysis of a wheel to find a position of holes at which vertical force shall be measured, a finite element analysis for the position of strain gauges.

  • PDF

Selection of measurement sets in static structural identification of bridges using observability trees

  • Lozano-Galant, Jose Antonio;Nogal, Maria;Turmo, Jose;Castillo, Enrique
    • Computers and Concrete
    • /
    • 제15권5호
    • /
    • pp.771-794
    • /
    • 2015
  • This paper proposes an innovative method for selection of measurement sets in static parameter identification of concrete or steel bridges. This method is proved as a systematic tool to address the first steps of Structural System Identification procedures by observability techniques: the selection of adequate measurement sets. The observability trees show graphically how the unknown estimates are successively calculated throughout the recursive process of the observability analysis. The observability trees can be proved as an intuitive and powerful tool for measurement selection in beam bridges that can also be applied in complex structures, such as cable-stayed bridges. Nevertheless, in these structures, the strong link among structural parameters advises to assume a set of simplifications to increase the tree intuitiveness. In addition, a set of guidelines are provided to facilitate the representation of the observability trees in this kind of structures. These guidelines are applied in bridges of growing complexity to explain how the characteristics of the geometry of the structure (e.g. deck inclination, type of pylon-deck connection, or the existence of stay cables) affect the observability trees. The importance of the observability trees is justified by a statistical analysis of measurement sets randomly selected. This study shows that, in the analyzed structure, the probability of selecting an adequate measurement set with a minimum number of measurements at random is practically negligible. Furthermore, even bigger measurement sets might not provide adequate SSI of the unknown parameters. Finally, to show the potential of the observability trees, a large-scale concrete cable-stayed bridge is also analyzed. The comparison with the number of measurements required in the literature shows again the advantages of using the proposed method.

Target Birth Intensity Estimation Using Measurement-Driven PHD Filter

  • Zhang, Huanqing;Ge, Hongwei;Yang, Jinlong
    • ETRI Journal
    • /
    • 제38권5호
    • /
    • pp.1019-1029
    • /
    • 2016
  • The probability hypothesis density (PHD) filter is an effective means to track multiple targets in that it avoids explicit data associations between the measurements and targets. However, the target birth intensity as a prior is assumed to be known before tracking in a traditional target-tracking algorithm; otherwise, the performance of a conventional PHD filter will decline sharply. Aiming at this problem, a novel target birth intensity scheme and an improved measurement-driven scheme are incorporated into the PHD filter. The target birth intensity estimation scheme, composed of both PHD pre-filter technology and a target velocity extent method, is introduced to recursively estimate the target birth intensity by using the latest measurements at each time step. Second, based on the improved measurement-driven scheme, the measurement set at each time step is divided into the survival target measurement set, birth target measurement set, and clutter set, and meanwhile, the survival and birth target measurement sets are used to update the survival and birth targets, respectively. Lastly, a Gaussian mixture implementation of the PHD filter is presented under a linear Gaussian model assumption. The results of numerical experiments demonstrate that the proposed approach can achieve a better performance in tracking systems with an unknown newborn target intensity.

Research on the optimization method for PGNAA system design based on Signal-to-Noise Ratio evaluation

  • Li, JiaTong;Jia, WenBao;Hei, DaQian;Yao, Zeen;Cheng, Can
    • Nuclear Engineering and Technology
    • /
    • 제54권6호
    • /
    • pp.2221-2229
    • /
    • 2022
  • In this research, for improving the measurement performance of Prompt Gamma-ray Neutron Activation Analysis (PGNAA) set-up, a new optimization method for set-up design was proposed and investigated. At first, the calculation method for Signal-to-Noise Ratio (SNR) was proposed. Since the SNR could be calculated and quantified accurately, the SNR was chosen as the evaluation parameter in the new optimization method. For discussing the feasibility of the SNR optimization method, two kinds of PGNAA set-ups were designed in the MCNP code, based on the SNR optimization method and the previous signal optimization method, respectively. Meanwhile, the single element spectra analysis method was proposed, and the analysis effect of single element spectra as well as element sensitivity were used for comparing the measurement performance. Since the simulation results showed the better measurement performance of set-up designed by SNR optimization method, the experimental set-ups were built for the further testing, finally demonstrating the feasibility of the SNR optimization method for PGNAA setup design.

중.고등학생들의 측정에 대한 추론 유형 분석 (A Study on Secondary School Students' Reasoning Types about Measurement)

  • 이은미;김범기
    • 한국과학교육학회지
    • /
    • 제32권2호
    • /
    • pp.293-305
    • /
    • 2012
  • 이 연구는 중 고등학생들의 측정 인식에 나타난 추론 유형을 분석하여 과학 교육의 시사점을 얻는 데 있다. 연구 대상은 중학생 197명과 고등학생 200명으로 하였다. 측정에 대한 인식 조사를 위하여 검사지 PMQ1을 사용하였고, 검사지의 문항별 응답 내용은 부호화된 분석틀을 기준으로 점 추론과 집합 추론 유형으로 분석하였다. 분석한 추론 유형을 자료 수집, 자료 처리, 자료 비교로 나누어 측정 단계별 추론 유형 분포 및 학년별 집합 추론 유형 분포 차이를 분석하였다. 또한 측정의 불확실성에 대한 추론 유형 분석을 통해 각 측정 단계별 나타난 추론 유형과 비교 분석하였다. 측정 단계별 추론 유형 분포에서 집합 추론 유형은, 자료 처리에서 높게 나타났고, 자료 수집과 자료 비교에서 낮게 나타났다. 측정 단계별 학년에 따른 집합 추론 유형 분포는 자료 비교 단계에서 중학생들과 고등학생들 사이에 유의미한 차이가 있었다. 측정의 불확실성에 대한 인식은 집합 추론 유형이 높게 나타났으나 학년에 따라 유의미한 차이는 없었다. 측정을 통해 신뢰할 수 있는 결과를 얻기 위해서는 각 측정 단계에서 측정의 불확실성에 대한 인식이 일관성 있게 작용해야 하며 이는 학생들에게 측정에 대한 직접적인 교수 학습이 필요함을 시사한다.

레이저 간섭계를 이용한 이동형 미세 변위 측정에 관한 연구 (A Study on the Portable Micro Displacement Measurement Using Laser Interferometer)

  • 최경현;양형찬
    • 동력기계공학회지
    • /
    • 제10권2호
    • /
    • pp.99-103
    • /
    • 2006
  • The laser interferometer has been used for measurement of the micro displacement error. Although the laser interferometer is widely accepted as a tool for measurement of motion accuracy, the set-up procedure is time-consuming because of the strict requirement on alignment between a laser head and optic units. This paper addresses the development of a laser interferometer to measure the micro displacement for a micro machine. The portable laser interferometer which integrates a laser probe and optics, is developed for the convenient measurement. For the experiment, moving mirror set up on the micro stage. The velocity decoding board is also added to calculate doppler shift frequency directly. The output signal is obtained and analyzed by LabView. Finally experiments are found out the relation between micro displacement and output signal.

  • PDF

Comparison of measurement uncertainty calculation methods on example of indirect tensile strength measurement

  • Tutmez, Bulent
    • Geomechanics and Engineering
    • /
    • 제12권6호
    • /
    • pp.871-882
    • /
    • 2017
  • Indirect measure of the tensile strength of laboratory samples is an important topic in rock engineering. One of the most important tests, the Brazilian strength test is performed to obtain the tensile strength of rock, concrete and other quasi brittle materials. Because the measurements are provided indirectly and the inspected rock materials may have heterogeneous properties, uncertainty quantification is required for a reliable test evaluation. In addition to the conventional measurement evaluation uncertainty methods recommended by the Guide to the Expression of Uncertainty in Measurement (GUM), such as Taylor's and Monte Carlo Methods, a fuzzy set-based approach is also proposed and resulting uncertainties are discussed. The results showed that when a tensile strength measurement is measured by a laboratory test, its uncertainty can also be expressed by one of the methods presented.

정치망과 죽방렴 어선의 탄소 배출량 현장 조사 (On-site measurement of carbon emissions of set net and bamboo weir fishing boats)

  • 한인우;김광복;오우석;박근창;이경훈
    • 수산해양기술연구
    • /
    • 제58권3호
    • /
    • pp.214-222
    • /
    • 2022
  • This study calculated the on-site measurement (Tier 4) of greenhouse gases emitted during the production stage of major fishing periods that utilize set nets and bamboo weir fishing boats. In addition, using theoretically calculated results (Tier 1), the emission factor presented by the Intergovernmental Panel on Climate Change (IPCC) was comparatively analyzed. On average, carbon emissions for each operating period in the bamboo weir and set net were calculated to be 0.16 and 3.58 kg CO2 time-1, respectively; and the measurement values (Tier 4) for each tool were about 4-17 times lower than their respective theoretical values (Tier 1). Significant differences were found based on engine performance. As port entry, port departure, and operating periods of the vessels show negligible variation with short distances, the operation of the vessel engine was considered as the main variable for carbon emissions in anchovy set net fishing.

집합 기반 POI 검색을 이용한 문장 유사도 측정 기법 (Sentence Similarity Measurement Method Using a Set-based POI Data Search)

  • 고은별;이종우
    • 정보과학회 컴퓨팅의 실제 논문지
    • /
    • 제20권12호
    • /
    • pp.711-716
    • /
    • 2014
  • 최근 논문 표절 논란과 지능형 텍스트 검색서비스에 대한 관심이 증가하면서 문장 유사도 측정의 필요성이 증가하고 있다. n-gram, 편집거리, LSA 등 기존의 다양한 방향으로 선행 연구가 있었지만 각 기법마다 장단점이 존재한다. 본 논문에서는 집합 기반 POI 검색 기법을 이용한 새로운 방향의 문장 유사도 측정 기법을 제안한다. 집합 기반 POI 검색 기법은 하드매칭에 비해 단어의 도치, 누락, 삽입, 변경에 현저한 성능 향상을 보인다. 이 기법을 이용하면 보다 정확하고 빠른 문장 유사도 측정이 가능하다. 제안하는 기법은 기존 집합 기반 POI 검색 기법의 데이터 로딩 알고리즘과 텍스트 검색 알고리즘을 변형하고 어절 연산 알고리즘을 추가하여 두 문장의 유사도를 백분율로 표현한다. 실험을 통해 본 논문에서 제시하는 기법이 정확도와 속도에서 n-gram과 기존 집합 기반 POI 검색 기법에 비해 우수함을 확인하였다.