• 한국의학물리학회지:의학물리
• /
• 제2권2호
• /
• pp.155-160
• /
• 1991

전자선 측정에 사용되는 원통형 전리함의 유효 측정점 깊이에 관한 연구를 하였다. 물팬톰 속에서 Markus 평판형 전리함을 사용하여 여러 에너지(전자선 6MeV 및 9MeV, 12MeV, 20MeV) 방사선의 선량 백분율을 구하고, 이 값을 기준으로 하여 원통형 전리함으로(PW233643 내경 5.5mm 및 PR-05P 내경 4mm, PM30 내경 15mm) 구한 선량 백분율과 비하여 선량 백분율 곡선의 변위를 유효 측정점으로 계산하였다. 이 결과 전자선에서는 0.4～0.6r 만큼, $^{60}$Co 감마선에서는 0.3～0.7r 만큼 표면쪽으로 이동한 값을 측정점으로 정하여야 하는 것을 알았다.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1643-1653
• /
• 1992

본 연구에서는 해석적 모우드해석 결과인 모우드 형상벡터를 이용하여 효과적 인 가진점과 응답측정점을 선정하는 기존의 두 방법에 대해 간략히 기술하고 비교검토 하고자 하였다. 첫번째 방법은 주파수응답함수에서 관심있는 모우드의 공진피크치와 관련있는 모우드상수를 이용하는 것이고, 두번째 방법은 계의 관심있는 모우드에 대한 동적 특성을 가장 잘 나타낼 수 있도록 특이치분해(singular value decomposition) 기 법을 적용함으로써 계의 대표자유도(master degree of freedom) 지점들을 선저하는 것 이다.우선 단순한 계인 외팔보아 알루미늄평판에 대해 두 방법을 적용함으로써 비 교검토하였고, 이 결과로부터 두번째 방법의 우수성을 확인할 수 있었다. 이에 따라 보다 복잡한 형상을 갖는 승용차의 부분구조물인 조향휠고정대 (deck cross member : DCM)에 대해서 두번째 방법을 이용하여 모우드 시험을 수행하고 그 결과에 대하여 논 하였다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.109-118
• /
• 1999

The objective of this research is to develop an effective inspection planning strategy for sculpture surfaces in OMM(On-Machine Measurement) process. As a first step, effective measuring point locations are determined to obtain optimum results for given sampling numbers. Two measuring point selection methods are suggested in this study based on newly proposed CAD/CAM/CAI integration concept: (1) by the prediction of cutting errors, (2) by considering cutter contact points to avoid the measurement errors caused by cusps. As a next step, the TSP(Traveling Salesman Problem)algorithm is applied to minimize the probe moving distance. Appropriate simulations and experiments are performed to verify the proposed inspection planning strategy in this study, and the results are analyzed.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.199-205
• /
• 2010

The research proposes the three-factor random measurement models for estimating the precision about operator, part, tool, and various measurement environments. The combined model with crossed and nested factors is developed to analyze the approximate F test by degrees of freedom given by Satterthwaite and point estimation of precisions from expected mean square. The model developed in this paper can be extended to the three useful models according to the type of nested designs. The study also provides the three-step procedures to evaluate the measurement precisions using three indexes such as SNR(Signal-To-Noise Ratio), R&R TR(Reproducibility&Repeatability-To-Total Precision Ratio), and PTR(Precision-To-Tolerance Ratio), The procedures include the identification of resolution, the improvement of R&R reduction, and the evaluation of precision effect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.391-395
• /
• 2002

This paper described about the ultra-precision profile measurement of aspheric surfaces using contact probing technique. A contact probe has been designed as a sensing device to obtain measuring resolutions in nanometer regime utilizing a leaf spring mechanism and a capacitive-type sensor. The contact probe is attached on the z-axis during measurement while aspheric objects are supported on the single point diamond turning machine(SPDTM). The machine xz-axis motions are monitored by a set of two orthogonal plane mirror type laser interferometers. Experimental results show that the contact probing technique developed of On-machine Measurement System in this investigation is capable of providing a repeatability of 20 nanometers with a $\pm$20 uncertainty of 300 nanometers.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.66-72
• /
• 1999

Local heating transportation pipe has sensor and return lines to detect water-leakage. There are impulse and resistance comparison measurement types for a water-leakage detection. The impulse type shows large detection error within a measurement range. Since the resistance comparison type can find a comparative accurate single water-leakage point in the measurement range of heating pipe, it has been used to detect water-leakages these days. However if the multi water-leakages are happened in the measurement range of transportation pipe. the resistance comparison type shows a detection error point by the parallel resistance between a detection sensor line and ground. But the detection error will be minimized by the divided transportation pipe loops. In this research, it suggests the design of remote controlled detection system which can divide a large pipe loop and a possible single water-leakage measurement process in each divided loops.

• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.363-400
• /
• 1995

The electroacupuncture according to Voll(EAV) is a method of combining the fundamentals of classical acupuncture with the facilities of modern electronics for diagnostics and therapy. Classical acupuncture uses energy conducting lines called 'meridians' and acupuncture points situated along them. Dr. Voll is considered the founder of 'EAV' since he succeeded not only in finding a method of exact electric localization and in explaining the interelation between the acupuncture points and their individual organs, but he also succeeded in measuring the resistance of these points and in explaining the diagnostic meaning of the measured values. In the course of his research, Voll found numerous new measurement points and energy conducting vessels unknown to classical acupuncture, but indispensible for diagnosis of human organic functions. As a basis of modern research in meridian theory, I tried to compare EAV measurement point with classical acupuncture point.

• 대한안전경영과학회지
• /
• 제7권3호
• /
• pp.47-61
• /
• 2005

Many researchers have proved that risk measurement of information systems is a very effective tool for improving confidence of information systems. However, information system risk in Korea still includes many subjective judgements. This study deals with applying a quantitative model to improve risk measurement of information system quality. First of all, we have come up with solutions to improve the evaluation efficiency on risk measurement. We have merged the risk guidelines of COBIT and CMM, and developed a quantified evaluation scheme that call by risk point. We have proved the validity of this model by interviews with experts and by case studies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.284-287
• /
• 2000

We analyzed the 3-dimensional discharge characteristic in plasma display panel(PDP) cell using the 3-dimensional emission distribution of 828nm light measured by scanned point detecting method(SPDM). The emitted light distributions on the ITO electrode show the stronger light intensity near to the electrode gap than outside. Also, 828nm light is widely detected outside of the bus electrode. We consider that measurement using new SPDM is effective to analyze the discharge physics and propose the new panel structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.101.3-101
• /
• 2001

By setting a refractor with a certain angle against the optical axis of the CCD camera lens, the image of a measuring point recorded on the image plane is displaced by the corresponding amounts related to the distance between the camera and the measuring point. When the refractor that keeps the angle against the optical axis is rotated physically at high speed during the exposure of the camera, the image of a measuring point draws an annular streak. Since the size of the annular streak is inversely proportional to the distance between the camera and the measuring point, the 3D position of the measuring point can be obtained by processing the streak. In this paper, for one of the applications of our system, the measurement of a moving surface is introduced. In order to measure the moving surface, multi laser spots are projected on the surface of object. Each position of ...