• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.521-526
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, Z(perpendicularity) axis was the highest value in vibration level, but vertical axis was the highest value at 25m point and longitudinal axis was the highest value at 50m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, 2 axis was the highest value in vibration level, but in vibration velocity transverse axis was the highest value at ground, was vertical axis at 1st floor, was longitudinal axis at 3rd floor and was vertical and longitudinal axis at 5th floor. The vibration level and the vibration velocity of 50m point showed higher correlation value than 25m point at the ground, but those of 25m point showed higher correlation value than 50m point at the apartment.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.632-638
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured by the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, 2 (perpendicularity) axis was the highest value in vibration level, but vertical direction was the highest value at 25 m point and longitudinal direction was the highest value at 50 m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, Z axis was the highest value in vibration level, but in vibration velocity transverse direction was the highest value at ground, was vertical direction at 1st floor, was longitudinal direction at 3rd floor and was vertical and longitudinal direction at 5th floor. The vibration level and the vibration velocity of 50 m point showed higher correlation value than 25 m point at the ground, but those of 25 m point showed higher correlation value than 50 m point at the apartment.

• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.565-571
• /
• 2009

본 연구에서는 천연가스의 탄화수소 이슬점과 물 이슬점을 계산하고자 하였다. 이를 위해 임계압력 근방까지 탄화수소 이슬점이 계산되도록 발산 방지 로직을 고안하였고 물 이슬점의 대해서는, 상용프로그램과 달리 탄화수소 이슬점 이하에서도 이슬점이 계산될 수 있도록 로직을 개발하였다. 그리고 계산결과는 국외 상용프로그램 및 ISO와 비교하였으며 차이는 없는 것으로 나타났다.

• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.76-83
• /
• 2019

Background: The hyoid bone is the only non-jointed structure among the skeletal tissues of the head and neck region, and its movement and posture depend on the attached muscle, ligament, and fascia. The location of the hyoid bone is important for airway maintenance, vocalization, chewing, swallowing, breathing, and head and scapular position. In general, the location of the hyoid bone is measured using radiographs and 3D computed tomography, and no studies have reported on clinical measurement methods. Objects: This study was performed to suggest clinical measurement methods for lateral deviation of the hyoid bone and to evaluate their reliability. Methods: In this study, 24 healthy volunteers (12 males, 12 females) in Cheongju-si participated. Two examiners performed the center point test and lateral motion test twice each to measure the lateral displacement of the hyoid bone. The reliability of the center point test was analyzed using intra-class correlation coefficients (ICC), and the reliability of the lateral motion test was analyzed using Cohen's kappa coefficient. Results: The intra-rater reliability of the center point test was good, and the inter-rater reliability was moderate. The intra- and inter-rater reliability of the lateral motion test showed substantial reliability. Conclusion: Based on these results, the center point test and the lateral motion test can be used as an alternative methods of the measurement of lateral deviation of the hyoid bone for people who have musculoskeletal disorders of the head, neck, and scapula.

• 한국조경학회지
• /
• 제49권5호
• /
• pp.59-70
• /
• 2021

본 연구는 한국 조경수목의 근원직경 측정의 모호성으로 생산자와 시공자 간의 검측 기준이 달라서 발생되는 분쟁을 줄일 수 있는 합리적인 근원직경 측정 위치 설정 방안에 대하여 실증 조사·분석하였다. 조경수목의 근원직경 측정 부위별 차이는 지하부 -6cm에서 표토부인 0cm까지는 3.59cm이었고, 지상부의 표토 0cm에서부터 6cm까지는 1.35cm로 근원직경의 측정위치별 차이는 지상부보다는 지하부에서 더 크게 나타났다. 조경수목 근원직경의 표준편차의 크기는 지하부 -6cm에서 표토부인 0cm까지는 0.64이었고, 지상부의 표토 0cm에서부터 6cm까지의 표준편차 차이는 0.16으로 근원직경의 측정위치별 차이는 지상부보다는 지하부에서 더 크게 나타났다. 조경수목 근원직경의 합리적 측정 위치 설정은 근원직경 측정 위치별 규격의 크기 변화 추세선에서 수간직경의 표준편차가 가장 적어지는 변곡점으로 설정하는 것이 제안되었다. 수종별 합리적인 측정 위치는 산딸나무 지상 18cm, 이팝나무 지상 12cm·느티나무 지상 12cm·팽나무 지상 12cm, 때죽나무 지상 10cm·산수유 지상 10cm, 단풍나무 지상 6cm·먼나무 지상 6cm, 가시나무 지상 4cm, 배롱나무 지상 2cm 이상으로 나타났다. 조경수목 근원직경 측정 부위별 차이가 공시수종 전체에서 표준편차가 작고, 편차의 기울기가 안정적인 합리적인 평균 측정위치는 지상부 평균 12cm 이상으로 나타났다. 조경수목 근원직경의 합리적인 측정위치 설정은 지상부 평균 12cm 이상에서부터라고 할 수 있으나 전통적인 관행상으로 익숙한 1자(尺) 30cm 인식이 빠르며, 측정자의 측정 위치의 편리성, 외국의 조경수목 측정기준에 대한 통일성 등 조경수목 근원직경의 합리적인 측정위치는 지표면 30cm 높이에서 측정하는 것이 좋을 것으로 추천되었다.

• 한국광학회지
• /
• 제12권2호
• /
• pp.103-108
• /
• 2001

플라즈마 디스플레이 패널(plasma display panel :PDP)에서 방출되는 광의 3차원 분포를 측정하기 위한 scanned point-detecting system(SPDS)을 고안하여 제작하였으며 이 시스템을 이용하여 실제 PDP의 3차원 광 방출 특성을 측정하고 해석하였다. SPDS는 상면에 핀홀이 달려 있는 광검출기(point detector)를 위치시킴으로써 특정 지점으로부터 방출되는 광만을 검출할수 있다. 3차원 물체의 특정 지점으로부터 방출된 광은 핀홀을 지나 검출기로 모두 입사되지만 다른 지점으로부터 방출된 광은 핀홀 앞에서 미리 집속되거나 핀홀 뒤에서 집속될것이므로 이러한 광들은 핀홀에 의해 대부분 차단될 것이다. 그러므로 물체의 특정 지점으로부터 방출된 광만이 핀홀이 설치된 검출기에 의해 검출되어 진다. SPDS를 이용하여 PDP cell 내에서 측정된 3차원 광 intensity 분포로부터 cellso의 방전현상을 다음과 같이 유추해낼수 있었다. Z축 측정이 진행될수록광의 intensity는 증가하였고 ITO전극의 안쪽부분에서 검출되는 광의 intensity가 가장 컸고 Y축 scan시 나타나는 X-Z평면에서 광의 intensity가 격벽과 격벽의 중심부분에서 가장 크게 나타났다.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.600-610
• /
• 1995

When combustion gas is cooled down below the dew point of sulfuric acid vapor in the heat recovery systems, condensation occurs. Since the condensed sulfuric acid solution causes low-temperature corrosion in materials, it is important to measure the SOx dew point by electric measurement. In this study, two kinds of probes having electric gaps of 1mm or 2mm were used. and experiments were carried out by the parameters of sulfuric acid vapor and water vapor concentration. The changes of electric current caused by sulfuric acid condensed on the surface of probe according to the cooling rate and the probe head surface temperature were sudied. The opimum cooling rate was decreased with the increasing of water vaper concentration regardless of sulfuric acid concentration. The sensitivity of electric current is improved for the narrower gap(1mm) of ring electrodes, but it rarely affects the SOx dew point measuring of different probes according to the change of cooling rate.

• 과학교육연구지
• /
• 제39권3호
• /
• pp.446-456
• /
• 2015

2009 개정 7학년 과학 1 교과서에 제시된 끓는점 실험을 할 때 측정에 영향을 미치는 요인을 분석하였으며, 실험을 통해 교과서에 제시된 실험 방법의 오류를 확인한 후 이를 개선하기 위한 방안을 제안하였다. 2009 개정 7학년 과학 1 교과서 9종에 제시된 끓는점 측정 실험을 분석하여 끓는점에 영향을 미치는 요인을 찾아보았더니 온도계의 종류, 가열 도구, 마개 밀폐 여부, 온도계의 위치, 가열 용기의 모양, 물질과 가열용기의 부피비와 같은 6종류의 요인을 확인하였다. 물질의 끓는점을 측정하는 실험을 수행할 때, 둥근바닥 플라스크의 10%만 물질로 채운 후 MBL 온도 센서를 가지 부근에 위치하게 하고, 마개를 막아 핫플레이트로 가열하는 것이 가장 효과적인 결과를 나타내는 것을 확인하였다. 이를 토대로 2009 개정 7학년 과학 1 교과서 9종과 비교하였더니 대부분의 교과서에서 수정되어야 할 점이 많은 오류가 있음을 발견하였다. 따라서 끓는점 측정에 대한 학생들의 학습 이해도를 높이고 오개념을 방지하기 위해 과학 1 교과서에 제시되어 있는 실험들이 보다 정확하게 개선되어야 할 것이다.

• 산업공학
• /
• 제11권1호
• /
• pp.199-205
• /
• 1998

This paper describes the development of on-the-machine measuring(OMM) system which can directly measure the two and three dimensional machined accuracy using a scanning probe in milling machine. Two algorithms, NC program based continuous path(CP) measurement and CAD data assisted point to point(PTP) measurement, are developed for three dimensional measurements, with consideration of the characteristics of the scanning probe. The algorithms are used to develop an auto measuring system. The delveloped system is compared with the CMM (Coordinate Measuring Machine) in terms of accuracy and repeatability. The OMM system is expected to realize measurement time reduction and hence result in high productivity.

• Wind and Structures
• /
• 제20권2호
• /
• pp.315-326
• /
• 2015

To overcome the drawbacks of the traditional contact-type sensor for structural displacement measurement, the vision-based technology with the aid of the digital image processing algorithm has received increasing concerns from the community of structural health monitoring (SHM). The advanced vision-based system has been widely used to measure the structural displacement of civil engineering structures due to its overwhelming merits of non-contact, long-distance, and high-resolution. However, seldom currently-available vision-based systems are capable of realizing the synchronous structural displacement measurement for multiple points on the investigated structure. In this paper, the method for vision-based multi-point structural displacement measurement is presented. A series of moving loading experiments on a scale arch bridge model are carried out to validate the accuracy and reliability of the vision-based system for multi-point structural displacement measurement. The structural displacements of five points on the bridge deck are measured by the vision-based system and compared with those obtained by the linear variable differential transformer (LVDT). The comparative study demonstrates that the vision-based system is deemed to be an effective and reliable means for multi-point structural displacement measurement.