• Culinary science and hospitality research
• /
• v.23 no.2
• /
• pp.95-103
• /
• 2017

The present study was performed to develop healthier sweeteners for brown rice Dasik with chia seed powder. The quality features and sensory evaluation were tested for brown rice Dasik with chia seed powder added with five different sweeteners and the results are as follows. The Dasik (DS) with isomalto-oligosaccharide and starch syrup received the highest scores on moisture content tests. The results from hardness tests identified the DS with agave syrup as the hardest, and the results from the adhesiveness test verified that the DS with agave syrup as well as the DS with starch syrup produce the most adhesive DS. The results of the springiness test show that the DS with starch syrup has higher springiness than other sweetners. The highest score for the chewiness and cohesiveness tests was the DS with starch syrup, while the DS with isomalto-oligosaccharide received the highest score on the gumminess test. The results of the chromaticity measurement test found that the DS with starch syrup showed the highest score of 'L' and the lowest score with fructo-oligosaccharide. In addition, the highest score of 'a' was DS with isomalto-oligosaccharide and the lowest score of 'b' was the DS with starch syrup. The results of sugar content displayed that the DS with starch syrup was the highest and the DS with fructo-oligosaccharide was the lowest score. The results of sensory evaluation verified that color did not influence evaluators' preference investigation. The results of sweet flavor test found that the DS with honey and the DS with agave syrup had the most preferred by participants, but there was no statistically significant difference among all five different sweeteners from the sweet taste test. Furthermore, the DS with agave syrup received the highest score while the DS with agave syrup scored the lowest from the hardness preference test. General preference evaluation identified the highest score with the addition of fructo-oligosaccharide and the lowest score with the addition of isomalto-oligosaccharide. Thus, the findings of the present study provide the meaningful results to demonstrate the DS with fructo-oligosaccharide is the most suitable sweetener to manufacture brown rice DS added by chia seed powder, and this result will help marketers with creating meaningful strategies and with developing similar products using chia seed powder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1095-1101
• /
• 2001

Spinach was minimally processed into the unseasoned side dish to be used for Korean food service industry, using the techniques of cook-chill and sous vide. Spinach was blanched at 10$0^{\circ}C$ for 6 minutes, vacuum-packaged in the unit of 500 g by plastic film of low gas permeability, pasteurized at 9$0^{\circ}C$ and then cooled rapidly at 3$^{\circ}C$. The chilled products were then stored at 3 and 1$0^{\circ}C$ with measurement in their quality. Six log cycle (6D) inactivation of Listeria monocytogenes and 13 log (13D) thermal destruction of Streptococcus faecalis were compared as two pasteurization conditions, which corresponded to heating for 22.8 and 30.0 minutes at 9$0^{\circ}C$, respectively. Milder heat processing based on 6D process of L monocytogenes gave better quality of color, texture, ascorbic acid and chlorophyll than the conditions of 13D process of S. faecalis. Any microbial growth in total aerobic, psychrophilic and anaerobic bacteria was not observed until 8 days at 1$0^{\circ}C$ and 14 days at 3$^{\circ}C$, which might be regarded as strict guidelines of shelf life. Storage times based on the changes in physical and chemical quality were longer than those based on strict microbial quality in case of the products pasteurized by 6D process of L. monocytogenes. The seasoned vegetables prepared from sous vide processed spinach were found to be inferior in sensory quality to those from freshly blanched one.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.62-67
• /
• 1986

The purpose of this research is to study comparatively what the effects will be to the sensory characteristics and texture of Yackwa when the soaking time in syrup varies from 5 minutes, 1 hour, 2 hours, 3 hours, 5 hours and 12 hours. Evaluation was conducted through sensory evaluation and instrumental test by Instron. In results obtained were as follows. 1. In sensory evaluation, color of Yackwas by 1 hour or 2 hours soaking in syrup were better than other sample. Shape of Yackwas by 2 hours or 3 hours soaking in syrup were better than other sample. As the soaking time increased softness of Yackwa tended to increase. Otherwise as the soaking time decreased, fracturability tended to be good. In taste, Yackwa by 1 hour soaking in syrup was the best. 2. Instron measurement indicated that Hardness, Springiness and Chewiness tended to decrease as the soaking time in syrup increased. But Cohesiveness did rot have much effect the soaking time in syrup. 3. Softness and Fracturability of Yackwa had significant relationship with Hardness ana Springiness. Therefore Hardness and Springiness represented the texture of Yackwa. In view of the above results, it came to the conclusion that Yackwa by soaking time in syrup for 1 hour or 2 hours could give the best results among the groups studied.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.413-420
• /
• 2015

The skin is one of the largest organs in our body and participates in many of the human organism's physiological and pathological events. Skin function were known for self-maintenance and self-repair, mechanical and chemical stress protection, protection against UV and environmental pathogenic micro-organisms, production of vitamin D, and social and psychological function through the physical aspect. The aim of this study was to evaluate the variation of biophysical parameters and to find relation with skin biomarkers in different anatomical site and age in Korean women. About 70 healthy volunteers in age range 20 to 49 were participated in this test. Test areas were the forearms and the cheek. Investigation to determine biophysical parameters on human skin, was carried out using various non-invasive methods. For analysis to skin biomarkers, we studied to examine various biomarkers for the quantitative determination of cortisol, fibronectin, keratin-1, 10, and 11, involucrin, and keratin-6 in human face and forearm. And we measured to skin biophysical parameters for skin anatomical site and age difference with non-invasive methods. As results of measuring site, some parameters were have following significant difference, stratum corneum hydration, trans epidermal water loss and skin color (L and a value). As results of age difference, skin colors were had only significant difference with age. For cortisol, keratin-6, fibronectin, keratin-1, 10, 11 contents, there were no significant difference in age and site. However, involucrin level in the cheeks were the highest for age group 30 ~ 39 compared to other age groups. These results suggest that in individual skin condition may explain detailed skin state variation.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.64-68
• /
• 2005

An analytical method of nine synthetic foods colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.9-19
• /
• 2020

Convective heat transfer is the main component of greenhouse energy loss because the energy loss by this mechanism is greater than those of the other two components (radiative and conductive). Previous studies have examined the convective heat transfer coefficients under natural conditions, but they are not applicable to symmetric thermal screens with zero porosity, and such screens are largely produced and used in Korea. However, the properties of these materials have not been reported in the literature, which causes selectivity issues for users. Therefore, in this study, three screens having similar color and zero porosity were selected, and a mathematical procedure based on radiation balance equations was developed to determine their convective heat transfer coefficients. To conduct the experiment, a hollow wooden structure was built and the thermal screen was tacked over this frame; the theoretical model was applied underneath and over the screen. Input parameters included three components: 1) solar and thermal fluxes; 2) temperature of the screen, black cloth, and ambient air; and 3) wind velocity. The convective heat transfer coefficients were determined as functions of the air-screen temperature difference under open-air environmental conditions. It was observed from the outcomes that the heat transfer coefficients decreased with the increase of the air-screen temperature difference provided that the wind velocity was nearly zero.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.921-932
• /
• 2006

Management to improve beef tenderness is always been a historical idea, but during the recent past it has become an issue of prime importance to the meat scientists and the industries as well. Variation in tenderness is the prime explanation for consumer’s dissatisfaction for the concern meat. It has been well documented that both postmortem proteolysis and sarcomere length have significant effect on meat tenderness and its consistency. Electrical stimulation and tenderstretch techniques have been used by a number of countries to underpin carcass quality assurance schemes focused on eating quality. The mechanism(s) by which the postmortem interventions improve tenderness (or prevent toughness) has not been fully elucidated. However, it is evident that electrical stimulation accelerates the development of rigor mortis so that prevention of cold shortening is possible and ageing commences at higher temperatures. On the other hand, tendersretch appears to prevent meat toughness via placing tension of the myofibrils and connective matrix during rigor development. Previous findings indicated that electrical stimulation and tenderstretch improved beef tenderness even for fattened cattle under moderate chilling conditions. Recent studies demonstrate beef tenderness to be one of the most important factors determining satisfaction levels of Korean beef consumers. There are number of studies which reported that electrical stimulation and tenderstretch techniques improved Hanwoo tenderness and color. It is believed that the techniques are mostly useful wherein controls of carcass size, fatness and/or chilling regimes are not easy such as Korean beef industry. However, Korean beef industry is one such area where postmortem intervention techniques have not been adopted so far. Taking into consideration of the Korean beef industry, wherein carcass size and fatness varies the post-slaughter intervention technique could be the most feasible measurement to ensure eating quality. The manuscript attempts to highlight the current knowledge aiming primarily towards the assurance of beef tenderness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6432-6439
• /
• 2014

The NAUT (Non-contact Air coupled Ultrasonic Testing) technique is one of the ultrasonic testing methods that enables non-contact ultrasonic testing by compensating for the energy loss caused by the difference in acoustic impedance of air with an ultrasonic pulser receiver, PRE-AMP and high-sensitivity transducer. As the NAUT is performed in a state of steady ultrasonic transmission and reception, testing can be performed on materials of high or low temperatures or specimens with a rough surface or narrow part, which could not have been tested using the conventional contact-type testing technique. For this study, the internal defects of spot weld, which are often applied to auto parts, and CFRP parts, were tested to determine if it is practical to make the NAUT technique commercial. As the spot welded part had a high ultrasonic transmissivity, the result was shown as red. On the other hand, the part with an internal defect had a layer of air and low transmissivity, which was shown as blue. In addition, depending on the PRF (Pulse Repetition Frequency), an important factor that determines the measurement speed, the color sharpness showed differences. With the images obtained from CFRP specimens or an imaging device, it was possible to identify the shape, size and position of the internal defect within a short period of time. In this paper, it was confirmed in the above-described experiment that both internal defect detection and image processing of the defect could be possible using the NAUT technique. Moreover, it was possible to apply NAUT to the detection of internal defects in the spot welded parts or in CFRP parts, and commercialize its practical application to various fields.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.171-175
• /
• 2004

An analytical method of nine synthetic food colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.1
• /
• pp.101-108
• /
• 2014

Objectives : The purpose of this study was to evaluate the tooth whitening effect of 0.74% and 2.80% hydrogen peroxide toothpastes and safety on tooth and gingival tissue. Methods : Toothpastes containing 0.74% and 2.80% hydrogen peroxide were evaluated. In in-vitro test, some additives (sodium metaphosphate, sodium pyrophosphate and titanium dioxide) were added to the toothpastes. Hydroxyapatite specimens (HAPs) were made and stained using modified Stookey's methods. HAPs were treated for 1 hour at shaking incubator and brushed for 1,000 times as 250 gF with each diluted toothpaste. Before and after color was measured by colorimeter. Using double blind method, 99 Korean with natural maxillary anterior teeth were selected and the initial brightness (baseline) was measured by SHADEEYE-EX. Based on this measurement they were crossly distributed into control group (0% hydrogen peroxide), test 1 (0.74% hydrogen peroxide) and test 2 (2.80% hydrogen peroxide). After 2 weeks, people of each group were provided toothpaste and told to use 3 times a day right after every meal for 3 minutes. The brightness of teeth was measured 3 times for every one month. Results : ${\Delta}L$ was statistically significant among three groups in shaking test. ${\Delta}L$ of two test groups was statistically significant compared with control group but not between each test group in brushing test. After using toothpaste for 3 months, test 1 group and test 2 group were 15.89% and 31.23% more whitened compared with control group respectively (p<0.05). Rate of more whitened person of each test group was 24.2% and 40.5% more than control group respectively (p<0.05). There was no difference in the hypersensitivity during 3 months using toothpastes and no side effect on teeth or gums. Conclusions : Toothpastes containing 0.74% and 2.80% hydrogen peroxide showed tooth whitening effect and both were safe enough to use for tooth whitening.