• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.100-113
• /
• 2017

Induced polarization (IP) method is based on the measurement of a polarization effect known as overvoltage of the ground. IP techniques have been usually used to find mineral deposits, however, nowadays widely applied to hydrogeological investigations, surveys of groundwater pollution and foundation studies on construction sites. IP surveys can be classified by its source type, i.e., time-domain IP estimating chargeability, frequency-domain IP measuring frequency effect (FE), and complex resistivity (CR) and spectral IP (SIP) measuring complex resistivity. Recently, electromagnetic-based IP has been studied to avoid the requirement for spike electrodes to be placed in the ground. In order to understand IP methods in this study, we: 1) classify IP surveys by source type and measured data and illustrate their basic theories, 2) describe historical development of each IP forward modeling and inversion algorithm, and finally 3) introduce various case studies of IP measurements.

• 재활복지
• /
• v.21 no.1
• /
• pp.253-277
• /
• 2017

The purpose of this study was to develop the Constraints in Physical Activity Scale for people with physical Disabilities(CPASD) which measures the constraints in physical activity of people with physical disabilities. For this study, the 5 step analytic framework of unified validity developed by Messick (1995), the framework for conducting a strong program of construct validation by Benson (1998) method were applied. Furthermore, the validity of CPASD was systematically presented by applying common factor model and measurement model to 264 persons with physical disabilities. The conclusion based on the results and discussions of this study is as follows. First, CPASD presented evidence of job validity. Four factors (17 items) were developed, consisting of leader constraints, economic constraints, prejudice, and exercise environment constraints through the analysis of the factor structure and the fit of factor coefficients. Second, the factor structure of the developed CPASD (leader constraint, economic constraint, prejudice, exercise environment constraint) was statistically distinguished and stably reflected the existing exercise participation constraints theory. Third, the developed CPASD presented evidence of the validity of the criteria. Leader constraints and prejudice were negatively correlated with positive motor emotions, leader constraints, prejudice, and exercise environment constraints were positively correlated with negative motor emotions. Therefore, in future research, it is necessary to reevaluate the current system and actual condition related to leader constraints, economic constraints, prejudices, and exercise environment constraints derived as factors of CPASD. To do this, it is necessary to judge the degree of reality based on the causal relationship verification and IRT theory using CPASD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.310-316
• /
• 2019

In automotive application, customers are demanding high efficiency and various functions for convenience. The demand for these automotive applications is steadily increasing. In this study, it has been studied the analysis of heat flow to improve the PCB(printed circuit board) heating performance of WPC (wireless power charger) recently developed for convenience. The charging performance of the wireless charger has been reduced due to power dissipation and thermal resistance of PCB. Therefore, it has been proposed optimal PCB design, layout and position of electronic parts through the simulation of heat flow analysis and PCB design was analyzed and decided at each design stage. Then, the experimental test is performed to verify the consistency of the analysis results under actual environmental conditions. In this paper, The PCB modeling and heat flow simulation in transient response were performed using HyperLynx Thermal and FloTHERM. In addition, the measurement was performed using infrared thermal imaging camera and used to verify the analysis results. In the final comparison, the error between analysis and experiment was found to be less than 10 % and the heating performance of PCB was also improved.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.4
• /
• pp.215-229
• /
• 2024

The purpose of this study was to explore various factors that affect the organizational commitment of health teachers' behavioral characteristics and explain the causal relationship between each factor. As an exploratory study, the subjects were about 500 people working as health teachers. A survey was conducted, and 190 responses were collected. Descriptive statistics were analyzed using SPSS, and the measurement model and hypotheses were tested using structural equation modeling. As a result of the analysis, the behavioral characteristics of health teachers were found to have a positive effect on their self-efficacy, and the behavioral characteristics and self-efficacy were found to have a positive effect on emotional commitment. In addition, health teachers' self-efficacy has a positive effect on emotional commitment, which means that rather than their behavioral characteristics having a direct effect on emotional commitment, their behavioral characteristics indirectly affect emotional commitment through a mediator called self-efficacy. It shows that it has an impact. In particular, it was confirmed that the school nurse's level of awareness of the importance of the task affected self-efficacy and emotional commitment. The implication of this study is that it explained the phenomenon of transfer of their behavioral characteristics to organizational commitment by empirically revealing that the competency, or behavioral characteristics, of health teachers are a factor affecting organizational commitment through self-efficacy. The goal is to empirically demonstrate that awareness of task importance, a job characteristic, affects self-efficacy and organizational commitment. The results of the study are expected to be able to suggest directions for capacity building and operation of health teachers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.453-461
• /
• 2015

In order to manage the deflection of a curved PCT girder bridge during construction, a GPS receiver was installed at the spot predicted to be the weak point during the incremental launching so as to measure the deflection at each construction stage. The deflections obtained in the experiment were compared with those derived from the monitoring of stress, temperature and inclination. The comparative analysis of the GPS measurement and analytical values obtained from finite element modeling with respect to the launching distance showed that the measured values differ by 0.6 to 1.6 times to the analytical results. This difference could be significantly reduced by thermal calibration. From the analysis of the behavioral pattern of the bridge, deflection occurred during construction in the concrete tip due to the deflection at the head of the nose at the 95m and 75m-spots, and compression and tension developed respectively at the compression weak zone and tension weak zone. The application of GPS appeared to enable more efficient management of the deflection during the erection of the curved PCT girder bridge and is expected to be helpful for the prediction and management of the behavior in future ILM construction sites.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.335-344
• /
• 2006

The domestic standards which used the standards of Road Association of Japan standards presents the distances of between jet-fans by the caliber of jet-fan. However, the Permanent International Association of Road Congress (PIARC) encourages it to be ten times a diameter of the tunnel. The distance of jet-fans installed in bases of two standards differs as much as two times, as so the proper basis after analysis of internal air current is needed since such difference can lead to disadvantage for selection of ventilation configuration. Based on Froude modeling theory, 1/40 scale acrylic model of a tunnel (215mm in diameter and 6.9m in length) and jet-fan (26.3mm and 31.6mm in caliber) was made for the measurement of changes in pressure and velocity due to the extension of tunnel for analysis of internal air current. And we measured the changes in pressure of surroundings of a jet-fan for confirmation of recirculation due to the exterior airs when the jet-fan is on. The results of the model test show that internal air current was not influenced by the caliber of jet-fan and its changes in pressure and velocity were stable in the point where it was nine times of diameter of the tunnel. Also the recirculation when the jet-fan is on could be verified. According to such results, in the cases of installing jet-fan in tunnels, the distances between jet-fans needs to be more than nine times the diameter.

• Journal of the Korean Society of Radiology
• /
• v.10 no.7
• /
• pp.521-529
• /
• 2016

Since Gamma Knife(R) radiosurgery(GKRS) is based on a single-fraction high dose treatment strategy, independent verification for the results of Leksell GammaPlan(R) (LGP) is an important procedure in assuring patient safety and minimizing the risk of treatment errors. Several verification methods have been developed and reported previously. Thus these methods were tested statistically and tried on Leksell Gamma Knife(LGK) target treatments through the embodiment of the previously proposed algorithms(PPA). The purpose of this study was to apply and evaluate the accuracy of verification methods for LGK target treatments using PPA. In the study 10 patients with intracranial lesion treated by GKRS were included. We compared the data from PPA and LGP in terms of maximum dose, arbitrary point dose, and treatment time at the isocenter locations. All data were analyzed by Paired t-test, which is statistical method used to compare two different measurement techniques. No statistical significance in maximal dose at 10 cases was observed between PPA and LGP. Differences in average maximal dose ranged from -0.53 Gy to 3.71 Gy. The arbitrary point dose calculated by PPA and LGP was not statistically significant too. But we found out the statistical difference with p=0.021 between TMR and LGP for treatment time at the isocenter locations. PPA can be incorporated as part of a routine quality assurance(QA) procedure to minimize the chance of a wrong overdose. Statistical analyses demonstrated that PPA was in excellent agreement with LGP when considering the maximal dose and the arbitrary point dose for the best plan of GKRS. Due to the easy applicability we hope PPA can be widely used.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.2
• /
• pp.381-417
• /
• 2011

The primary goal of this study is to examine the factors that affect how satisfied sexual minorities are with their lives. This study focuses on how sexual minorities perceive social stigma, the social influences involved in its perception, and the effects this perception has. Using stress-coping theory, this study looks at how social stigma, as a perceived stress, affects social support and self-esteem, how the stigma influences the degree to which individuals "come out" in an effort to cope, and the resultant effects of this coping mechanism on life satisfaction. The data used if from a sample of 478 individuals who self identify as gay, lesbian or bisexual. It was collected through an online survey. Using SEM, the quality was evaluated by analyzing the measurement model, and the relationship of the variables included in the theoretical model was verified by analyzing the structural model. The results of this study show that social stigma directly affects the life satisfaction of Korean sexual minorities. It significantly influences the social support they receive(from family and sexual minority peers), and their self-esteem. The degree to which the individual "comes out" is shown to affect life satisfaction as well. In contrast, the mediating effect of heterosexual support is shown to be insignificant. Based on the analyses, practical strategies regarding social stigma, social support, self-esteem, and "coming out" are suggested for sexual minorities. The social stigma should be reduced and society-scaled campaigns promoted in order to improve their level of life satisfaction. In addition, institutional protection should be developed and specialized educational courses on human rights provided which will empower these minorities with self-help mechanisms. Furthermore, issues such as establishing support system and providing a social welfare system for the sexual minority community are discussed.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1027-1036
• /
• 2023

Coastal topographic information is crucial in coastal management, but point measurment based approeaches, which are labor intensive, are generally applied to land and underwater, separately. This study introduces an efficient method enabling land and undetwater surveys using an unmanned aerial vehicle (UAV). This method involves applying two different algorithms to measure the topography on land and water depth, respectively, using UAV imagery and merge them to reconstruct whole coastal digital elevation model. Acquisition of the landside terrain is achieved using the Structure-from-Motion Multi-View Stereo technique with spatial scan imagery. Independently, underwater bathymetry is retrieved by employing a depth inversion technique with a drone-acquired wave field video. After merging the two digital elevation models into a local coordinate, interpolation is performed for areas where terrain measurement is not feasible, ultimately obtaining a continuous nearshore terrain. We applied the proposed survey technique to Jangsa Beach, South Korea, and verified that detailed terrain characteristics, such as berm, can be measured. The proposed UAV-based survey method has significant efficiency in terms of time, cost, and safety compared to existing methods.

• Geophysics and Geophysical Exploration
• /
• v.27 no.3
• /
• pp.181-195
• /
• 2024

This tutorial explains that the static effect in the magnetotelluric (MT) survey is a physical phenomenon caused by charges accumulated on the boundaries of subsurface inhomogeneities. To facilitate understanding of the physical phenomenon, differences between static induction and charge accumulation on the boundary are explained and analyzed with help of schematic illustrations. Subsequently, from the electromagnetic (EM) integral equation formulation, it is clearly shown that the secondary electric field due to charges accumulated on the interface in the presence of the primary field appears as the static effect. Therefore, except in the cases of the layered earth or a two-dimensional earth with transverse magnetic (TM) mode excitation, the static effect always exists in MT responses and further, it is not 'static' but rather frequency dependent. Despite the fact that the static effect is a secondary electric field due to inhomogeneity, inevitable under-sampling in the frequency and spatial domains prevent the effect from being handled properly in numerical inversion. Therefore, considering the practical aspects of the MT survey, which cannot be a continuous measurement covering the entire survey area over a wide frequency band, a three-dimensional (3-D) inversion incorporating the static shift as a constraint with the Gaussian distribution is introduced. To enhance understanding of the integral equation EM modeling, the formulation of the 3-D integral equation and mathematical analyses of the Green tensor and scattering current are described in detail in the Appendix.