• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.147-154
• /
• 2020

A novel approach for predicting lateral displacement caused by pile installation in anisotropic clay is presented, on the basis of the cylindrical and spherical cavities expansion theory. The K₀-based modified Cam-clay (K₀-MCC) model is adopted for the K₀-consolidated clay and the process of pile installation is taken as the cavity expansion problem in undrained condition. The radial displacement of plastic region is obtained by combining the cavity wall boundary and the elastic-plastic (EP) boundary conditions. The predicted equations of lateral displacement during single pile and multi-pile installation are proposed, and the hydraulic fracture problem in the vicinity of the pile tip is investigated. The comparison between the lateral displacement obtained from the presented approach and the measured data from Chai et al. (2005) is carried out and shows a good agreement. It is suggested that the presented approach is a useful tool for the design of soft subsoil improvement resulting from the pile installation.

• 지질공학
• /
• 제23권1호
• /
• pp.47-55
• /
• 2013

대구 지하철 굴착공사 중 노출된 굴착벽의 수평변위분석을 위해 서로 인접한 3개소의 경사계 계측자료를 이용하여 굴착지반의 변위특성 및 원인을 지질공학적 관점에서 고찰하였다. 연구지역은 경상누층군 하양층군 반야월층 지반에 해당하며 안산암질화산암, 석회질셰일, 사암, 호온펠스, 규장암맥 등으로 구성된 하부의 암반층과 이를 부정합으로 피복하고 있는 상부의 토사층으로 구성된다. 경사계 계측공 중 D4 지반의 암반층은 RMR V 등급이며, 층리면과 단층면을 따라 심도 12 m 지점에서 N34W 방향으로 최대수평변위량이 101.39 mm로 분석 되었고, D5 지반의 암반층은 RMR IV 등급이며, 셰일의 층리면, 셰일과 규장암의 접촉면을 따라 심도 9 m와 14 m에서 거의 남쪽 방향으로 최대수평변위량이 53.01 mm ~ 55.17 mm로 측정 되었다. Y6 지반의 암반층은 RMR III 등급이며, 상부 토사층과 하부 암반층의 경계면인 부정합면을 따라 심도 7 m 지점에서 S52W 방향으로 12.65 mm의 최대수평변위량을 나타낸다. 굴착벽에서 측정한 암반 내 불연속면들을 평사투영하여 예상되는 변위방향과 각 경사계 계측분석 결과 얻어진 수평변위방향이 거의 일치하는 결과를 보였으며, 굴착벽의 지중수평변위는 암반 내 불연속면의 발달정도와 종류, 배향 및 암석의 종류에 좌우되며, 굴착벽에 수직방향과 수평평행방향의 벡터 합성 방향으로 많이 발생한다. 또한 토사층 내 지중수평변위의 양상이 심도에 따라 비교적 곡선이며 연속적 궤적을 보이는데 반해 암반층 내 지중수평변위의 양상은 직선적이고 불규칙적 궤적을 나타낸다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권1호
• /
• pp.99-109
• /
• 2012

이 연구에서는 변형률계를 사용하여 변위를 추정하는 이론식을 제안 및 검증하고 하중 작용점과 크기를 추정하여 강재보의 건전도 평가 시스템을 개발하고자 하였다. 실험결과 160kN(항복하중의 56%)가력시 최대처짐 점에서 변형률계를 사용하여 얻는 처짐과 변위계의 측정처짐과의 오차율이 2%이내로 나타났으며 하중작용점 및 크기의 추정도 오차율1% 이내로 나타났다. 이를 통해 변형률계로 강재보의 변위 및 하중을 계측 할 수 있으며 나아가 변위계와 하중계의 생략으로 경제적인 센서설계를 할 수 있다. Lab VIEW로 구현된 건전도 평가 프로그램은 측정된 데이터가 일정 범위(강도 한계상태, 사용성 한계상태, 항복변형률)를 넘어설 때 단계별 경고를 발생하였고 변형률계 만으로 사용성한계상태와 강도한계상태를 동시에 모니터링 할 수 있었다.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• 대한치과보철학회지
• /
• 제39권4호
• /
• pp.410-416
• /
• 2001

Objective: Disc displacement may affect the joint space narrowing between condylar head and glenoid fossa. This study was designed to evaluate the correlation between the joint space change and the severity of anterior disc displacement. Materials and Methods: Two hundreds temporomandibular joints MR images of TMD patients(170 joints) and asymptomatic volunteers(30 joints) were evaluated for this purpose. Anterior disc displacement was divided into 3 stages(normal, little to mild, and moderate to severe displacement) based on sagittal images, then joint spaces were measured at medial, central and lateral parts of condyle head on coronal MR images, respectively The joint spaces of 3 groups divided according to the severity of anterior disc displacement were compared. Results: The reduction of joint space was related to the severity of the anterior disc displacement at lateral, medial side and especially at center Conclusion: The temporomandibular joint space was affected by the severity of the anterior disc displacement.

• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1025-1039
• /
• 2010

Measuring displacement response for civil structures is very important for assessing their performance, safety and integrity. Recently, video-based techniques that utilize low-cost high-resolution digital cameras have been developed for such an application. These techniques however have relatively low sampling frequency and the results are usually contaminated with noises. In this study, an integrated visual-inertial measurement method that combines a monocular videogrammetric displacement measurement technique and a collocated accelerometer is proposed for displacement and velocity measurement of civil engineering structures. The monocular videogrammetric technique extracts three-dimensional translation and rotation of a planar target from an image sequence recorded by one camera. The obtained displacement is then fused with acceleration measured from a collocated accelerometer using a multi-rate Kalman filter with smoothing technique. This data fusion not only can improve the accuracy and the frequency bandwidth of displacement measurement but also provide estimate for velocity. The proposed measurement technique is illustrated by a shake table test and a pedestrian bridge test. Results show that the fusion of displacement and acceleration can mitigate their respective limitations and produce more accurate displacement and velocity responses with a broader frequency bandwidth.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.935-956
• /
• 2016

With the help of advanced image acquisition and processing technology, the vision-based measurement methods have been broadly applied to implement the structural monitoring and condition identification of civil engineering structures. Many noncontact approaches enabled by different digital image processing algorithms are developed to overcome the problems in conventional structural dynamic displacement measurement. This paper presents three kinds of image processing algorithms for structural dynamic displacement measurement, i.e., the grayscale pattern matching (GPM) algorithm, the color pattern matching (CPM) algorithm, and the mean shift tracking (MST) algorithm. A vision-based system programmed with the three image processing algorithms is developed for multi-point structural dynamic displacement measurement. The dynamic displacement time histories of multiple vision points are simultaneously measured by the vision-based system and the magnetostrictive displacement sensor (MDS) during the laboratory shaking table tests of a three-story steel frame model. The comparative analysis results indicate that the developed vision-based system exhibits excellent performance in structural dynamic displacement measurement by use of the three different image processing algorithms. The field application experiments are also carried out on an arch bridge for the measurement of displacement influence lines during the loading tests to validate the effectiveness of the vision-based system.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.827-838
• /
• 2021

The dynamic displacement is considered to be an important indicator of structural safety, and becomes an indispensable part of Structural Health Monitoring (SHM) system for high-speed railway bridges. This paper proposes an indirect strain based dynamic displacement reconstruction methodology for high-speed railway box girders. For the typical box girders under eccentric train load, the plane section assumption and elementary beam theory is no longer applicable due to the bend-torsion coupling effects. The monitored strain was decoupled into bend and torsion induced strain, pre-trained multi-output support vector regression (M-SVR) model was employed for such decoupling process considering the sensor layout cost and reconstruction accuracy. The decoupled strained based displacement could be reconstructed respectively using box girder plate element analysis and mode superposition principle. For the transformation modal matrix has a significant impact on the reconstructed displacement accuracy, the modal order would be optimized using particle swarm algorithm (PSO), aiming to minimize the ill conditioned degree of transformation modal matrix and the displacement reconstruction error. Numerical simulation and dynamic load testing results show that the reconstructed displacement was in good agreement with the simulated or measured results, which verifies the validity and accuracy of the algorithm proposed in this paper.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5854-5860
• /
• 2014

본 연구에서는 대표적인 토목구조물인 교량에서 영상 기반 변위 계측장치(VDMS)를 이용하여 변위를 측정하고, 고가의 변위측정장비인 LDV와의 비교를 통하여 그 현장 적용 성능을 평가하였다. 본 연구에서 사용한 VDMS는 카메라와 마커, 프레임 그래버, 노트북으로 구성되었으며, 마커를 구조물에 부착하여 그 영상을 촬영하고 평면 호모그래피 기법을 이용하여 마커가 부착된 구조물의 변위를 측정하는 장치이다. 개발된 VDMS의 성능 검증을 위하여 우선 소형 구조물을 이용한 간단한 실내 실험을 수행하였다. 다음으로 실제 철도교량에서 KTX를 다양한 조건으로 주행하고, 그에 의하여 발생한 변위를 VDMS과 LDV를 이용하여 계측한 뒤, 얻어진 두 변위를 비교하여 VDMS의 현장 적용 성능을 평가하였다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1576-1582
• /
• 1990

본 연구에서는 Al 2024-T3 판으로 제작된 한면 노치 시편에 여러 조건의 피로 하중을 가하여 노치면내에 형성된 미소 피로균열의 COD를 광학적 간섭현상에 기초를 둔 미소 변위측정기(Interferometric Strain/Displacement Gage`ISDG)를 개량하여 측 정하였다. 이 ISDG의 컴퓨터 조정방식을 정밀화시켜 0.02$\mu\textrm{m}$까지의 상대변위를 측정 할 수 있도록 보완하였다. 고정밀화돈 측정기로 수십 $\mu\textrm{m}$길이의 미소균열의 COD도 측 정하였고 컴류터에 저장시킴으로써 시험후 미소 피로균열에 대한 열림 특성을 분석할 수 있다. 측정된 미소 피로균열의 균열열림특성을 고찰하고 긴 균열의 열림특성과도 비교.분석 하였다.