• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.69-74
• /
• 2005

본 연구에서는 선박의 항해 안전성과 정박 중인 선박의 계류 안전성 평가에 기초가 되는 선체운동 평가를 위한 다목적 계측시스템을 개발 하는데 있다. 다목적 계측시스템은 선박에 탑재되어 외력에 의해 발생하는 동적 동요를 계측 및 분석하기 위해 상하, 좌우, 전후방향의 가속도량을 측정하는 3축 가속도 계측기를 포함하여, 방위 센서, 2축 경사계 및 초음파 변위계로 구성하였다. 선박의 항해 및 계류 안전성을 종합적으로 평가하기 위해서는 특정 센서를 이용 선체운동을 실시간으로 측정하여 내항성능 평가 시스템과 항해 또는 정박 중인 선박의 상태에 관한 선박 데이터베이스 시스템을 이용하여 평가한다. 개발된 다목적 계측시스템은 해상에서의 전복사고 분석, 선박 출입항 통제, 부두에서의 하역작업 통제, 조선소에서의 내항성능 및 안전설계에 있어서도 적용이 가능하리라 본다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권1호
• /
• pp.55-61
• /
• 2000

The present study was conducted to investigate the possible role of the sympathetic nervous system in two-kidney, one clip (2K1C) and deoxycorticosterone acetate (DOCA)-salt hypertension. 2K1C and DOCA- salt hypertension were made in Sprague-Dawley rats. Four weeks after induction of hypertension, systolic blood pressure measured in conscious state was significantly higher in 2K1C $(216{\pm}18\;mmHg)$ and DOCA-salt $(205{\pm}29\;mmHg)$ groups than that in control $(128{\pm}4\;mmHg).$ The third branches (＜300 ${\mu}m$ in outer diameter) of the mesenteric artery were isolated and cut into ring segments of $2{\sim}3$ mm in length. Each ring segment was mounted in tissue bath and connected to a force displacement transducer for measurement of isometric tension. The arterial rings were contracted by application of norepinephrine (NE) in a dose-dependent manner. The amplitude of the NE-induced contraction of the vessels was significantly larger in hypertension than in control. The NE-induced contraction was significantly enhanced by neuropeptide Y (NPY) in hypertension. Reciprocally, NPY-elicited vasocontraction was increased by NE in hypertension. These results suggest that the sympathetic nervous system contributes to the development of 2K1C and DOCA-salt hypertension.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.355-360
• /
• 2006

컨테이너 크레인용 쐐기형 레일클램프에서 조 패드의 초기 압착력은 라커의 물림각 설정 후 라커를 체결 시 주요 부품의 변형량에 의해서 결정된다. 이때 여러 인자들로 인해 쐐기 프레임의 저항력이 발생하게 되면, 인장봉의 변형을 감소시켜 초기 압착력 설정을 위한 라커의 물림각이 변하게 된다. 이러한 쐐기 프레임의 저항력은 롤러와 쐐기사이의 편심거리와 쐐기 프레임과 외곽 프레임 사이의 틈새에 따라 결정된다. 본 연구에서는 초기압착단계에서 인장봉에 전달되는 인장력을 실험을 통하여 측정함으로써 쐐기 프레임의 저항력이 라커의 쐐기형 레일클램프의 압착력에 미치는 영향을 평가하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.68-69
• /
• 2005

Low temperature ($\leq900^{\circ}C$) sintering piezoelectric ceramics $0.01Pb(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3-0.35PbTiO_3-0.23PbZrO_3+0.1wt%Y_2O_3+xwt%ZnO$ $(0{\leq}x{\leq}2.5)$ have been developed and investigated. The electromechanical coupling coefficient ($k_p$), piezoelectric constant ($d_{33}$), and mechanical quality factor ($Q_m$) have been measured to characterize the piezoelectric materials system. When 2.0 wt% ZnO is added, the properties of the system, $d_{33}$ = 559 pC/N, $k_p$ = 55.0 % and $Q_m$ = 73.4 are obtained which are very suitable for piezoelectric actuators. A bending mode multilayer actuator has been also developed using the materials which size is $27(L)\times9(W)\times1.07(t)mm^3$. The actuators are fabricated by multilayer ceramic (MLC) process and consist of24 layers and each layer thickness is $35{\mu}m$. At this time, the displacement of actuator was $100{\mu}m$ at 28V.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.1-10
• /
• 1998

교량의 신설 또는 보수를 위한 작업차량의 진출입로나 기존 통행차량의 우회를 목적으로 한시적으로 사용되는 가교량은 일반적으로 상부구조로 H-Beam, 하부구조로 H-Pile을 사용하여, 이들 각 부재를 고장력볼트로 연결한 강구조 형식을 채택하고 있다. 그러나 이러한 교량은 상부구조에 신축이음부를 두지 않고 있어 일일기온차에 의해 발생하는 온도응력이 전체 구조거동에 미치는 영향이 클 것으로 예상된다. 따라서, 본 연구에서는 상부구조인 H-Beam에 온도와 변형률의 상시계측을 위한 모니터링 시스템을 도입하여 측정된 온도 및 변형률 데이터로부터 발생온도와 온도응력의 관계를 조사하였으며, 구조해석을 통한 이론치와의 비교를 실시하여 각 부재에서 발생하는 온도응력이 전체 구조거동에 미치는 영향을 평가하였다. 그 결과, 본 구조물에서 발생하는 응력의 변화는 부재의 온도변화에 의한 온도응력이 주원인인 것으로 나타났으며, 하부구조인 H-Pile의 충분한 교축방향 변위로 인하여 상부구조인 H-Beam의 온도변형 구속은 이루어지지 않는 것으로 나타났다. 한편, 상부구조인 H-Beam간의 연결 강성이 충분하지 않아 전체 구조계보다는 부분 구조계에 대한 해석으로부터 얻어진 변형량이 측정 온도 및 응력으로부터 계산된 변형량과 잘 일치하는 것으로 나타났다.

• 대한한방내과학회지
• /
• 제18권2호
• /
• pp.83-93
• /
• 1997

Rhizoma Coptidis, a traditional herb medicine, has been used in Korea and China for many centuries as a treatment for many disease. The purpose of the present study was to determine the effect of Rhizoma Coptidis on histamine-induced tracheal smooth muscle contraction in guinea pigs and rats. Guinea pigs(500g, male) and rats(250g, male) were killed by $CO_2$ exposure and a segment (8-10mm) of the thoracic trachea from each guinea pig was cut into equal segments and mounted 'in pairs' in a tissue bath. Contractile force was measured with force displacement transducers under 0.5g loading tension. The dose of histamine which evoked 50% of maximal response ($ED_{50}$) was obtained from cumulative dose response curves for histamine ($10^{-7}-10^{-3}M$). Contractions evoked by histamine($ED_{50}$) were inhibited significantly by Rhizoma Coptidis. The mean percent inhibition was 33.2% after 1.5mg/ml Rhizoma Coptidis, and 69.5% after 5.0mg/ml Rhizoma Coptidis in guinea pigs, and the mean percent inhibition was 25.3% after 1.5mg/ml Rhizoma Coptidis, and 65.8% after 5.0mg/ml Rhizoma Coptidis in rats. Indomethacin ($10^{-7}M$) slightly but significantly attenuated the inhibitory effects of Rhizoma Coptidis. But propranolol and methylene blue ($10^{-7}M$) did not significantly alter the inhibitory effect of Rhizoma Coptidis. These results indicate that Rhizoma Coptidis can relax histamine-induced contraction of guinea pig and rat tracheal smooth muscle, and that this inhibition involves, in part, cyclooxygenese inhibitor.

• Biomolecules & Therapeutics
• /
• 제3권4호
• /
• pp.322-326
• /
• 1995

General pharmacology of LB20304, a quinolone antibiotic, were examined in terms of general behaviour, cardiovascular, and central nervous system. LB20304 at oral dose of 2,000 mg/kg did not induce significant behavioural changes in mice. In contrast with ciprofloxacin, LB20304 at dose of 20 mg/kg, iv. did not show any observable effects on the blood pressure in rats. Displacement of [$^3$H]muscimol binding to the rat brain synaptic membranes was measured. LB20304 was shown to be about five times less potent than ciprofloxacin in specific GABA receptor binding. Drug interaction between LB20304 and 4-biphenyl acetic acid, an active metabolite of fenbufen, was assessed in mice by measuring convulsion and/or subsequent death. A single oral pretreatment with 4-BPA at 400 mg/kg increased the incidence of convulsion and death after oral administration of ciprofloxacin at the doses of 25, 50, and 100 from zero of five to three of five, two of five, and four of five, respectively, whereas LB20304 alone or combination with 4-BPA caused neither convulsions nor death at the doses of 12.5, 25, 50, and 100 mg/kg, respectively. Quinolones-induced epileptogenic activities were assessed by a direct intracerebral injection of test articles. The CD$_{50}$ values (nmole) are as follows; 169.47, 35.36, 105.29, and 88.67 for LB20304, ciprofloxacin, of loxacin, and lomefloxacin, respectively. From these data, LB 20304 at therapeutic doses seems to be much more safe than any other quinolones tested.d.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.352-357
• /
• 2008

구조물의 안전 보장 문제에 있어 재료의 파손 이전에 미세균열을 검출하는 것은 매우 중요하다. 비선형 초음파 기법은 일반적인 초음파 기법보다 미세결함에 민감하기 때문에 이를 이용하여 비파괴적으로 구조물이나 재료의 건전성을 진단하는 방법이 주목받고 있다. 계면접촉에 의한 비선형 초음파 효과는 초음파가 내부의 미세 균열에 입사될 때 미세균열면에서 응력과 변위가 비선형 관계를 가지고, 이에 의해 파가 왜곡되어 그 결과 고조파 성분이 발생하는 현상이다. 본 연구에서는 이러한 비선형 초음파 기법의 적용가능성을 알루미늄 시편에 인위적으로 발생시킨 피로균열을 대상으로 실험적으로 검증하고자 하였다. 이를 위해 V-노치를 갖는 A16061의 피로균열 시험편을 준비하고, 균열방향으로 2차 고조파 성분의 크기를 측정하였다. 실험결과 미세균열에서 고조파 성분이 크게 발생하며 이 기법에 의한 균열깊이 측정이 일반적인 반사파의 6 dB drop법보다 정확함을 확인하였다.

• 대한두개안면성형외과학회지
• /
• 제12권1호
• /
• pp.12-16
• /
• 2011

Purpose: This study examined the biomechanical stability of four different plating techniques in the experimental model of mandibular subcondyle fracture. Methods: Twenty standardized bovine tibia bone samples ($7{\times}1.5{\times}1.0cm$) were used for this study. Each of the four sets of tibia bone was cut to mimic a perpendicular subcondyle fracture in the center area. The osteotomized tibia bone was fixed using one of four different fixation groups (A,B,C,D). The fixation systems included single 2.0 mm 4 hole mini adaption plate (A), single 2.0 mm 4 hole dynamic compression miniplate (B), double fixation with 2.0 mm 4 hole mini adaption plate (C), double fixation with a 2.0 mm 4 hole mini adaption plate and 2.0 mm 4 hole dynamic compression miniplate (D). A bending force was applied to the experimental model using a pressure machine (858 table top system, $MTS^{(R)}$) until failure occurred. The load for permanent deformation, maximum load of failure were measured in the load displacement curve with the chart recorder. Results: Double fixation with a 2.0 mm 4 hole mini adaption plate and a 2.0 mm 4 hole dynamic compression miniplate (D) applied to the anterior and posterior regions of the subcondyle experimental model showed the highest load to failure. Conclusion: From this study, double fixation with an adaption plate and dynamic compression miniplate fixation technique produced the greatest biomechanical stability. This technique may be considered a useful means of fixation to reduce the postoperative internal maxillary fixation period and achieve early mobility of the jaw.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.639-648
• /
• 2017

Fracture energy values KV have been measured on cast steel, used in the container manufacture, by instrumented Charpy impact testing. This material has a large ductility on the upper transition region at $+20^{\circ}C$ and a ductile tearing with an expended plasticity before a brittle fracture on the lower transition region at $-20^{\circ}C$. To assess the fracture toughness of this material we use, the $K_{IC}$-KV correlations to measure the critical stress intensity factor $K_{IC}$ on the lower transition region and the dynamic force - displacement curves to measure the critical fracture toughness $J{\rho}_C$, the essential work of fracture ${\Gamma}_e$ on the upper transition region. It is found, using the $K_{IC}$-KV correlations, that the critical stress intensity factor $K_{IC}$ remains significant, on the lower transition region, which indicating that our testing material preserves his ductility at low temperature and it is apt to be used as a container's material. It is, also, found that the $J_{\rho}-{\rho}$ energetic criterion, used on the upper transition region, gives a good evaluation of the fracture toughness closest to those found in the literature. Finally, we show, by using the ${\Gamma}_e-K_{IC}$ relation, on the lower transition region, that the essential work of fracture is not suitable for the toughness measurement because the strong scatter of the experimental data. To complete this study by a numerical approach we used the ANSYS code to determine the critical fracture toughness $J_{ANSYS}$ on the upper transition region.