• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.223-233
• /
• 2017

철도에 사용되고 있는 분기기는 중요한 시스템 중 하나이다. 분기기 시스템의 건전성은 철도운용 안정성에 매우 중요하다. 분기기 시스템을 진단하기 위하여, LVDT와 accelerometer를 분기기에 설치하였다. LVDT는 분기기에서 변위가 발생하는 부분에 설치하여, 분기기의 이동과 차량의 주행에서 발생되는 변위를 측정하였다. Accelerometers는 충격과 진동이 발생하는 부분에 설치하여 충격량과 진동을 측정하였다. 측정된 데이터를 이용하여 변수화를 위한 데이터를 추출하였으며, 이 변수들은 진단에 사용하였다. 진단 알고리즘은 확률분포와 인공신경망을 사용하였다. 변수화된 값이 확률분포를 이용하여 판단할 수 있으면 확률분포를 사용하였으며, 형태를 보고 판단할 필요가 있으면 인공신경망을 활용하였다. 본 논문에서는 정상적인 상태에서 데이터를 측정하여, 정상상태의 조건을 위한 학습을 수행하였다.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.134-140
• /
• 2001

The polymerization shrinkage of composite resins is an important drawback although the composites have many advantages-more esthetic and conservative than metallic restoratives etc. The purposes of this research were to develop a new measurement method and to manufacture an instrument that can measure the initial dynamic volumetric shrinkage of composite resins during polymerization. The instrument was basically an electromagnetic balance that constructed with a force transducer using position sensitive photo detector(PSPD) and a negative feedback servo amplifier of proportional-derivative(PD) controller. The volumetric change of composites during polymerization was detected continuously as buoyancy change in distilled water by means of Archimedes's principle. It was converted to continuous electrical voltage signal in real time. The signal was properly conditioned and filtered and then it was stored in computer by a data acquisition(DAQ) board. By using this electronic instrument. the dynamic patterns of the polymerization shrinkage of eight commercial(Z-100, DenFil, AeliteFil, Z-250, P-60, SureFil, Synergy compact, and Tetric ceram) composite resins were measured and compared. The results were as follows. 1. From this project of developing instrument, the ability has been achieved that can acquire and process data of electrical signal transformed from various physical phenomenon by using temperature, displacement. photo. and force transducer. As a consequence, the instrumentation and measurement system used to analyze the physical characteristics of various dental materials in dental research field can be designed, manufactured and implemented in lab. 2. This instrument has some advantages. It was insensible to temperature change and could measure true dynamic volumetric shrinkage in real time without complicated process. It showed accuracy and high precision results with small standard deviation. 3. The polymerization shrinkage of composites was significantly different between brands and ranged from 2.47％ to 3.89％, The order of polymerization shrinkage was as follows, in order of increasing shrinkage, SureFil, P60, Z250, Z100, Synergy compact. DenFil, Tetric ceram, and AeliteFil. 4. The polymerization shrinkage rate per unit time, dVol％/dt, showed that the instrument can provide an indirect research method for polymerization reaction kinetics.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.436-440
• /
• 2014

The ${\alpha}$-Effect; Ground state; Transition state; Intramolecular H-bonding; Yukawa-Tsuno plot; Second-order rate constants for aminolysis of 2-chloro-4-nitrophenyl X-substituted-benzoates (1a-h) have been measured spectrophotometrically in 80 mol % $H_2O/20$ mol % DMSO at $25.0^{\circ}C$. The Br${\emptyset}$nsted-type plot for the reactions of 2-chloro-4-nitrophenyl benzoate (1d) with a series of primary amines curves downward, which has been taken as evidence for a stepwise mechanism with a change in rate-determining step (RDS). The Hammett plots for the reactions of 1a-h with hydrazine and glycylglycine are nonlinear while the Yukawa-Tsuno plots exhibit excellent linearity with ${\rho}_X=1.22-1.35$ and ${\gamma}= 0.57-0.59$, indicating that the nonlinear Hammett plots are not due to a change in RDS but are caused by stabilization of substrates possessing an electron-donating group (EDG) through resonance interactions between the EDG and C=O bond of the substrates. The ${\alpha}$-effect exhibited by hydrazine increases as the substituent X changes from a strong EDG to a strong electron-withdrawing group (EWG). It has been concluded that destabilization of hydrazine through the electronic repulsion between the adjacent nonbonding electrons is not solely responsible for the substituent dependent ${\alpha}$-effect but stabilization of the transition state is also a plausible origin of the ${\alpha}$-effect.

• 대한한의학방제학회지
• /
• 제7권1호
• /
• pp.167-181
• /
• 1999

Rhizoma Arisaematis, Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Folium Perillae, Radix Sophorae Subprostratae, Radixi, Radix Ledeboutriellae, Rhizoma Atractylodis, Herba Ephedrae, Radix Puerariae and Radi Aconitx Bupleuri have been used in Korea for many centuries as a treatment for various disease. The purpose of the present study is to determine the effect of several herbs on norepinephrine(NE) induced blood vessel contraction in rabbits and pigs. Rabbit(2 kg, male) were killed by $CO_2$ exposure and a segment (8-10mm) of each rabbit was cut into equal segments and mounted in a tissue bath. Contractile force was measured with force displacement transducers under 2-3 g loading tension. The dose of norepinephrine(NE) which evoked 50% of maximal response $(ED_{50})$ was obtained from cumulative dose response curves for NE $(10^{-6}{\sim}10^{-3}M)$. Contractions evoked by NE $(ED_{50})$ were inhibited significantly by Rhizoma Arisaematis, Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Folium Perillae, Radix Sophorae Subprostratae and Herba Ephedrae in abdominal aorta. Contractions evoked by NE $(ED_{50})$ were inhibited significantly be Lignum Akebiae, Rhizoma Zedoariae, Cortex Eucommiae, Herba Ephedrae, Radix Puerariae and Radix Bupleuri in femoral artery. Contractions evoked by NE $(ED_{50})$ were inhibited significantly by Radix Sophorae Subprostratae, Radix Aconiti and Herba Ephedrae in renal artery. These results indicate that each herb can relax NE induced contraction of rabbit and pig blood vessel selectively, and that this relaxation relates to Gui-Gyung(歸經).

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.60-68
• /
• 2012

본 연구에서는 미국 뉴욕주 로체스터시 소재 강합성 데크 트러스 보도교를 대상으로 사용성을 평가하기 위한 상시진동 실험(ambient vibration test)을 수행하였고 이를 해석적 방법에 의한 결과와 비교하였다. 교량전체에 대한 상시진동실험은 수치모델 작성 시 도입되는 여러 가정들에 대한 타당성을 평가하는데 있어서 유용한 방법이며, 교량의 고유진동수나 모드형상과 같이 구조 동력학에서 중요한 구조적인 변수를 결정하는데 있어 중요한 역할을 한다. 본 연구에서는 교량의 수직방향 및 수평방향 진동 특성과 변위를 측정하기 위하여 실제 교량에서 보행자에 의해 발생하는 진동을 입력하중으로 사용하였다. 교량 구조물에 대한 모델링을 위하여 3차원 유한 요소법을 사용하여 해석을 수행하였으며, 이를 통하여 현장실험 결과와의 유효성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.905-910
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the fm spring. And then, the result of the FE analysis is compared with that of the modal test. The natural frequencies as well as the mode shapes calculated by the proposed contact models have a greater similarity to the test results than those by the previous beam-spring model. In addition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed; one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former. Finally, the vibration displacements are measured in the range of 0.112-0.214mm for the excitation force of 0.25-0.75 N.

• 한국산림과학회지
• /
• 제90권5호
• /
• pp.619-631
• /
• 2001

지속가능한 산림경영의 새로운 패러다임이 형성되면서, 어떻게 산림의 지속가능성을 객관적으로 평가하고 측정할 수 있는가의 문제가 관심의 초점이 되어 왔다. 본 연구는 산림의 지속가능성에 대한 개념적 전개과정을 정립하고, 비교성과 양립성의 견지에서 국제적, 지역적으로 개발되어온 지속가능한 산림경영 기준과 지표의 진전상황을 분석하였다. 지속가능한 산림경영의 기준과 지표에 대한 자료의 가용성과 적용성을 살펴보기 위하여, 몬트리올프로세스 회원국이 제출한 자료를 근거로 작성된 보고서찰 분석 정리하였다. 우리나라의 경우에는 산림통계 등 기존 자료를 수집 이용하여, 기준과 지표의 개념, 난이도 정도, 측정단위, 자료의 가용성, 문제점과 개선사항 등 6개 항목에 대해 조사 분석하였고, 지속가능한 산림경영 기준과 지표의 적용성을 검토하였다.

• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.35-41
• /
• 2015

자동포용 주퇴복좌장치는 사격충격을 흡수하기 위한 목적으로 개발된 장치이다. 만약 자동포에서 탄자가 발사 될 때 발생하는 매우 높은 수준의 사격충격을 흡수하지 못한다면 반동에 의하여 정밀한 타격은 불가능해진다. 본 연구에서는 이러한 역할을 하는 주퇴복좌장치의 해석모델을 멀티도메인 소프트웨어를 활용하여 개발하고 검증하는 것을 다룬다. 연구의 진행과정은 다음과 같다. 우선 설계의도를 파악하여 해석모델을 개발하고 기본적인 감쇠특성을 확인한다. 그리고 필드테스트에서 얻은 사격충격력을 해석모델에 부여하여 필드테스트와 동일한 환경을 해석도구 상에 구축한다. 최종적으로 주퇴복좌장치의 내부압력과 포신의 변위를 필드테스트 결과와 비교하여 멀티도메인 소프트웨어를 활용한 주퇴복좌장치의 해석모델이 유효성을 갖는지를 검증한다.

• 접착 및 계면
• /
• 제5권2호
• /
• pp.22-36
• /
• 2004

Several in-situ testing methods of adhesively bonded joints under static short-time tensile loading are critically analyzed in terms of experimental procedure and data evaluation. Due to its rather homogeneous stress state across the glue line, the tensile-shear test with thick single-lap specimens, according to ISO 11003-2, has become the most important test process for the determination of realistic materials parameters. This basic method, which was improved in both, the experimental part by stepped adherends and easily attachable extensometers and the evaluation procedure by numeric substrate deformation correction and test simulation based on the finite element method (FEM), is therefore demonstrated by application to several kinds of adhesives and metallic adherends. Multi-axial load decreases the strength of a joint. This effect, which is illustrated by an experimental comparison, impedes the derivation of realistic mechanical characteristics from measured force-displacement curves. It is shown by numeric modeling that tensile-shear tests with thin plate substrates according to ISO 4587, which are widely used for quick industrial quality assurance, reveal an inhomogeneous stress state, especially because of relatively large adherend deformation. Complete experimental determination of the elastic properties of bonded joints requires independent measurement of at least two characteristics. As the thick-adherend tensile-shear test directly yields the shear modulus, the tensile butt-joint test according to ISO 6922 represents the most obvious complement of the test programme. Thus, validity of analytical correction formulae proposed in literature for the derivation of realistic materials characteristics is verified by numeric simulation. Moreover, the influence of the substrate deformation is examined and a FEM correction method introduced.

• 접착 및 계면
• /
• 제5권2호
• /
• pp.14-26
• /
• 2004

For reliable determination of mechanical characteristics of adhesively bonded joints used e.g. as input data for computer-aided design of complex components, the thick-adherend tensile-shear test according to ISO 11003-2 is the most important material testing method. Although the total displacement of the joint is measured across the polymer layer directly in the overlap zone in order to minimize the influence of the stepped adherends, the substrate deformation must be taken into account within the framework of the evaluation of the shear modulus and the maximum shear strain, at least when high-strength adhesives are applied. In the standard ISO 11003-2 version of 1993, it was prescribed to perform the substrate deformation correction by means of testing a one-piece reference specimen. The authors, however, pointed to the excessive demands on the measuring accuracy of the extensometers connected with this technique in industrial practice and alternatively proposed a numerical deformation analysis of a dummy specimen. This idea of a mathematical correction was included in the revised ISO 11003-2 version of 2001 but in the simplified form of an analytical method based on Hooke's law of elasticity for small strains. In the present work, it is shown that both calculation techniques yield considerably discordant results. As experimental assessment would require high-precision distance determination (e.g. laser extensometer), finite element analyses of the deformation behavior of the bonded joint are performed in order to estimate the accuracy of the obtained substrate deformation corrections. These simulations reveal that the numerical correction technique based on the finite element deformation modeling of the reference specimen leads to considerably more realistic results.