• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.64-71
• /
• 2008

This study is on pedestrian protection device using pneumatic cylinder and simple link mechanism when vehicle collide with pedestrian. This study ensured the safety space between engine and hood after it applies to simple link mechanism and pneumatic cylinder. It can absorb the damage which measure the specific device if vehicle collide with pedestrian. Combination of simple link mechanism and pneumatic cylinder was more superior than the present pedestrian protection device. Simple link mechanism could confirm superior height and survival probability than when only cylinder operated. It also ensured enough space between engine and hood. And if a cylinder is not working because of old cylinder, poor repair or damage of accident vertical cylinder would be difficult to execute because there exists the irregular space between engine and hood. If simple link mechanism operates with only one cylinder it could ensure the regular space because simple link mechanism set up at the middle of hood. So this device could confirm high safety for pedestrian.

• Journal of Engineering Education Research
• /
• v.13 no.1
• /
• pp.52-61
• /
• 2010

The goal of this study is to prepare a measure to operate and link the educational curriculums in packaging sector to qualification test. In more detail, this study is aimed at first, preparing a skills framework on the packaging sector, and second, preparing a measure to operate the qualification test that is linked to the packaging educational curriculums. Also, we studied documents, consulted the expert group for this study. As a basic direction for preparing a measure to link the educational curriculums in packaging sector to qualification test, we can develop a skills framework in the packaging sector, and based on the skills framework, the national skill standards can be developed by each area of skill. And based on that, we will be able to develop and operate the education and training courses and utilize them in qualification test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.288-291
• /
• 2014

This paper presents a new method for measuring the half-wave voltage $V_{\pi}$ of an electro-optic phase modulator based on a phase-modulated photonic link with interferometric demodulation. By using this method, the $V_{\pi}$ can be obtained with the RF voltage amplitude input required to achieve 1-dB gain compression of link and the differential delay of a Mach-Zehnder interferometer. We measure the $V_{\pi}$ of a commercial phase modulator by using the presented method and the carrier/the first sideband intensity ratio method. Furthermore, we compare the two measurements with the typical value provided by the manufacturer. The experiment shows that this novel measurement method is feasible, straightforward, and accurate.

• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.114-121
• /
• 2017

This paper describes the design and fabrication of a three-axis force sensor with parallel plate beams (PPSs) for measuring the calf force while a patient with a walking assist robot is walking. Current walking assist robots can't measure the weight of the patient's leg and the robot's leg which required for robot control. So, the three-axis force sensor in the calf link is designed and manufactured, it is composed of a Fx force sensor, a Fy force sensor and a Fz force sensor. The three-axis force sensor was designed using by FEM(Finite Element Method), and fabricated using strain-gages. The characteristics experiment of the three-axis force sensor was carried out respectively. The test results indicated that the repeatability error and the non-linearity error of three-axis force sensor was less than 0.04% respectively. Therefore, the fabricated three-axis force sensor in the calf link can be used to measure the patient's calf force in the walking assist robot.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.923-928
• /
• 2003

This paper proposes a bottleneck link bandwidth measurement algorithm for reducing packet transmission delay within the grid network. There are two methods for measuring bottleneck link bandwidth：Packet Pair algorithm and Paced Probes algorithm. They measure bottleneck link bandwidth using the difference in arrival times of two paced probe packets of the same size traveling from the same source to destination. In addition, they reduce the influences of cross traffic by pacer packet. But there are some problems on these algorithms：it's not possible to know where bottleneck link occurred because they only focus on measuring the smallest link bandwidth along the path without considering bandwidth of every link on the path. So hop-by-hop based bottleneck link bandwidth measurement algorithm can be used for reducing packet transmission delay on grid network. Timestamp option was used on the paced probe packet for the link level measurement of bottleneck bandwidth. And the reducing of packet transmission delay was simulated by the solving a bottleneck link. The algorithm suggested in this paper can contribute to data transmission ensuring FTP and realtime QoS by detecting bandwidth and the location where bottleneck link occurred.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.7-14
• /
• 2015

In a multi-hop wireless network, connectivity is determined by the link that is established by the receiving signal strength computed by subtracting the path loss from the transmission power. Two path loss models are commonly used in research, namely two-ray ground and shadow fading, which determine the receiving signal strength and affect the link quality. Link quality is one of the key factors that affect network performance. In general, network performance improves with better link quality in a wireless network. In this study, we measure the network connectivity and performance in a shadow fading path loss model, and our observation shows that both are severely degraded in this path loss model. To improve network performance, we propose power control schemes utilizing link quality to identify the set of nodes required to adjust the transmission power in order to improve the network throughput in both homogeneous and heterogeneous multi-hop wireless networks. Numerical studies to evaluate the proposed schemes are presented and compared.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.107-116
• /
• 1993

In the design and operation of robitic arm with flexible links, the equation of motion are required to exactly model the interaction between rigid body motion and elastic motion and to be formulated efficientlyl. In this paper, the flexible link is represented by applying the D-H rigid link representation method to measure the elestic deformation. And the equations of motion of robotic arm, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated from the principle of virtual power. Dynamic characteristics due to elastic deformation of each link are obtained by using F. E. M to model complex shaped link acurately and by eliminating elastic modes of higher order that do not largely affect motion to reduce the number of elastic degrees of freedom. Also presented is the result of simulation of flexible robotic arms whose joints are controlled by direct or PD control.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.49-54
• /
• 1997

It is very important to measure and monitor hull stress which is caused by a buoyant force and a weight of cargo for safety of ship. However, an exact measurement of hul stress, using the traditional strain gage which is made of metal or semiconductor, is very difficult, because a ship would be exposed by the severe temperature environment of $-20 ^{\circ}C$ to $80 ^{\circ}C$. This paper propose a new concept strain gage which can improve accuracy and compensage effectively affects due to temperature. The strain gage is consists of two parts. One is the Hull Deformation Amplifier which introuce several lever and link system, and another is a transducer converting distance into voltage signal. The HDA measure the amount of deformation and amplify it. And a lever and link system of the HDA is introduced for compensating temperature deformation by installing in perpendicular direction without stress. This paper also reports on the results of the experiments to verify linearity of the strain gage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1333-1353
• /
• 2012

The robustness of a network is usually measured by error tolerance and attack vulnerability. Significant research effort has been devoted to determining the network design with optimal robustness. However, little attention has been paid to the problem of how to improve the robustness of existing networks. In this paper, we investigate how to optimize attack tolerance and communication efficiency of an existing network under the limited link addition. A survival fitness metric is defined to measure both the attack tolerance and the communication efficiency of the network. We show that network topology reconfiguration optimization with limited link addition (NTRLA) problem is NP-hard. Two approximate solution methods are developed. First, we present a degree-fitness parameter to guide degree-based link addition method. Second, a preferential configuration node-protecting cycle (PCNC) method is developed to do trade-off between network robustness and efficiency. The performance of PCNC method is demonstrated by numerical experiments.