• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권4B호
• /
• pp.371-378
• /
• 2006

In this study, a theoretical equation was derived based on Odgaard (1986) and Chang (1988) to reveal the streamwise variation of the secondary flow in meandering channels. The new equation describes the transverse component of the secondary flow as a function of streamwise and vertical directions. To validate the proposed equation, hydraulic experiments were conducted in laboratory meandering channels having different sinuosity. Comparison of experimental results with the proposed equation and an existing equation revealed that the equation was in good agreement with the measured data. However, the existing equation overestimated the transverse velocity. Investigation of the variation of the secondary flow with respect to hydraulic parameters based on the new equation showed that the secondary flow tended to increase as the sinuosity, the roughness, and the aspect ratio became larger. Also, streamwise profile of the secondary flow was sensitive to variations of the roughness and the aspect ratio.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.799-802
• /
• 2008

General behaviors based on hydraulic characteristics of natural streams and channels have been recently analyzed and developed via various numerical models. However in the states of natural hydraulics, an experimental research must be performed simultaneously with the mathematical analysis due to effects of hydraulic properties such as meander, sediment, and so on. In this study based on 2-D advection-dispersion equation, flow and tracer experiments were performed in the S-curved meandering laboratory channel with a rectangular cross-section. The channel was equipped with instrument carriages which was equipped with an auto-traversing system to be used with velocity measuring sensors throughout the depth and breadth of the flow field. To measure concentration distribution of the salt solution was adjusted to that of the flume water by adding methanol and a red dye (KMnO4) was added to aid the visualization of the tracer cloud, the tracer was instantaneously injected into the flow as a full-depth vertical line source by the instantaneous injector and the initial concentration of the tracer was 100,000 mg/l. The secondary current as well as the primary flow pattern was analyzed to investigate the flow distribution in the meandering channels. The velocity distribution of the primary flow for all cases skewed toward the inner bank at the first bend, and was almost symmetric at the crossovers, and then shifted toward the inner bank again at the next alternating bend. Thus, one can clearly notice that the maximum velocity occurs taking the shortest course along the channel, irrespective of the flow conditions. The result of the tracer tests shows that pollutant clouds are spreading following the maximum velocity lines in each cases with various mixing patterns like superposition, separation, and stagnation of pollutant clouds. Flow characteristics in each cases performed in this study can be compared with tracer dispersion characteristics with using evaluation of longitudinal and transverse dispersion coefficients(LDC, TDC). As expected, LDC and TDC in meandering parts have been evaluated with increasing distribution and straight parts have effected to evaluate minimum of LDC and TDC due to symmetric flow patterns and attenuations of secondary flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권2B호
• /
• pp.209-216
• /
• 2006

This study is to analyse the characteristics of bar migration, which is important roles to bank erosion and meandering development, for the meandering channels with erodible bed by using a 2-D numerical model in the generalized coordinate systems. The results of the numerical experiments showed that the features of bar migration were affected by the meandering wavelength to the width ratio, and had a relatively good agreement with the criterion for bar migration through a bend suggested by Kinoshita and Miwa (1974). The bar migrated with speed in the channel with long wavelength and broad width, and the criterion for bar migration was increased. The bar celerity was decreased abruptly near the criterion.

• Journal of the Korean Society of Hazard Mitigation
• /
• 제11권3호
• /
• pp.191-200
• /
• 2011

Levee failure cause the huge amount of damage to human and property. Overflow and erosion of levee are primary cause of a break in a levee but the analysis of breach pattern and impact is partially inadequate. The flow characteristics of meandering rivers are very important in field of river hydraulics that should be studied in practical viewpoints relating to river levee. In meandering the secondary flow that rotary direction is changed reciprocally occurs in three dimension is known. In this study flow characteristics of local river are considered and of meandering channels are analyzed using CCHE2D and FLOW3D. The stability and accuracy of models are examined comparing the measuring and analyzed data for the experimental channel and natural river(Namgang). Consequently, the flow characteristics in a meandering river are suggested precisely and it is essential that river levees having meandering river should be analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권2B호
• /
• pp.171-178
• /
• 2006

The finite element model based on the 2-D advection-dispersion equation incorporating the dispersion tensor that is calculated using velocity field data was developed in order to analyze more accurately 2-D mixing of pollutants for meandering streams. The proposed model was tested using the straight channel that inclined at 45o in the Cartesian coordinate system. The simulation results showed that dispersion tensor model using velocity field data gives an accurate solution. The suitability of the proposed model in analyzing actual pollutant mixing in meandering channels was demonstrated by comparing the simulation results with experimental data obtained from the tracer tests in the laboratory flume. Comparison results showed that the proposed model with dispersion tensor can represents more accurately the mixing phenomena of the pollutants in the meandering channels in which the direction of the primary flow is varying periodically along the channel.

• Water for future
• /
• 제26권1호
• /
• pp.103-114
• /
• 1993

Migration characteristics with forms of channels and bed conditions are studied by constant-radius curve (CRC), sine-generated curve (SGC) and small-wave theory (SWT) method. For channels which are meandering and of which bed conditions are of coarse materials, transverse bed slope, depth and velocity distributions are predicted by CRC and SGC method, and the results are compared with measured field data, And for fine bed-materials of the sinuous channels, lateral and downvalley migration rates are computed by SWT method. It is confirmed from this investigation that transverse mass-flux factor plays significant roles in determining of magnitude and direction of meander migration.

• Journal of Wetlands Research
• /
• 제10권2호
• /
• pp.67-79
• /
• 2008

The one-dimensional (1D) finite-difference method (FDM) with Abbott-Ionescu scheme and the two-dimensional (2D) finite-volume method (FVM) with an approximate Riemann solver (Osher scheme) for unsteady flow calculation in river are described. The two models have been applied to several problems including flow in a straight channel, flow in a slightly meandering channel and a flow in a meandering channel. The uniform rectangular channel was employed for the purpose of comparing results. A comparison is made between the results of computation on 1D and 2D flows including straight channel, slightly meandering channel and meandering channel application. The implementation of the finite-volume method allows complex boundary geometry represented. Agreement between FVM and FDM results regarding the discharge and stage is considered very satisfactory in straight channel application. It was concluded that a 1D analysis is sufficient if the channel is prismatic and remains straight. For curved (meandering) channels, a 2D or 3D model must be used in order to model the flow accurately.

• Journal of Korean Society of Disaster and Security
• /
• 제8권1호
• /
• pp.5-13
• /
• 2015

In this study, the lateral overflow discharge coefficients for the curvatures of side weir on meandering channel were analyzed. The side weir installed in accordance with the variation of the radius of curvature of the central angle bends with $180^{\circ}$. FLOW-3D model is applied to calculate the discharge coefficients of the side-weir on meandering and straight channels and the characteristics of the discharge coefficients are analysed. In order to verify the numerical model, the results from the hydraulic experiment conducted by the former research are compared with the results simulated by FLOW-3D in the same conditions. The discharge coefficients are calculated for the ratio between curvature ($R_c$) and channel width (b), and the ratio between over flow discharge of the straight channel ($Q_{wc}$) and the meandering channel ($Q_{wc}$) are compared. As the result, the discharge coefficients depend on the weir depth on upstream, and the radius of curvature, so that the discharge coefficients of side weir on the meandering channel can be estimated by them on the straight channel.

• Journal of Korea Water Resources Association
• /
• 제37권5호
• /
• pp.387-395
• /
• 2004

A computer model was proposed to simulate channel changes and bed material sorting of the meandering channels with different grain size in time and space simultaneously. The bed at the outside of the meandering channel with mixed sediments was scoured deeply and composed of coarser materials, and at the inside was aggradated and composed of finer materials. The sorting process started at the upstream inflection point and was finished at the downstream inflection point. At the natural with complicated boundaries and non-uniform grain sizes, the bed near the outside at the bend and narrow width was scoured deeper with coarse materials than in the channel with uniform grain sizes. The point bars showed lip at the inside near the bend and the bed materials were finer The bed at the outside near the bend and in the narrow width was scoured deeply with the coarser materials.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1661-1665
• /
• 2006

In a natural river, cross sections of a channel vary according to inner or outer parts of meandering. Generally, depth of outer parts is deeper than that of inner parts. This kind of cross section change by meandering can be demonstrated by Beta distribution. The objects of this research is a 3D simulation of primary and secondary flow in the meandering natural channel. FLOW-3D program, a numerical model using CFD technique, and LES method was used for this research. 3D simulations were conducted in the channels having Beta distribution cross sections which have beds of mortar, gravel and vegetation. Two types of water stages and discharge were applied to each channel. In this research, primary flows are located in the outer parts of a top of bend and secondary flows rotate in the bottom on outer parts.