• 한국방재학회 논문집
• /
• 제4권4호
• /
• pp.13-19
• /
• 2004

본 연구에서는 만곡부 피해지점을 조사함에 있어 피해가 극심하게 발생한 유역을 선택하여, 만곡부의 피해 관련 인자들로 추정되는 인자들에 대하여 2002년 강릉시 남대천 유역을 대상으로 조사하였다. 선정 조사 된 하천은 9개이며 채택된 피해지점은 23개 지점이다. 제시된 회귀직선식에서는 사행파장과 하천연장, 사행대와 하천연장의 상관계수가 가장 높은 것으로 나타났다. 또한 분석된 특성인자들 중에 하상경사와 사행대, 곡률비와 하폭의 관계를 포락곡선으로 제시하고자 하였다. 이것은 만곡부의 수해복구설계 및 하천 정비시 재해예방에 도움이 될 것이다.

• ETRI Journal
• /
• 제29권5호
• /
• pp.614-618
• /
• 2007

A miniaturized bandstop filter (BSF) is introduced in this paper. The filter consists of one meander spurline and a pair of capacitively loaded stubs. The meander spurline with low resonant frequency and improved slow-wave factor exhibits excellent resonant bandgap characteristics which can be modeled by a longitudinally coupled resonator. The design of the proposed microstrip BSF is presented, and its performance is measured. Measurements show that there is a stopband from 2.3 to 5.6 GHz with $S_{21}$ less than -20 dB. The total length of this BSF equals 23 mm.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.197-202
• /
• 2005

In this paper, we analyzed the signal distortion incorporating meander-shaped transmission line on PCB in broadband frequency range, up to 50GHz. This broadband characteristic provides reasonable analysis of digital pulse having very short rising time. Simulation results reveal suppression characteristic at multiband which is dependent on only the width of meander arm. This width of arm also can be adjusted using different permittivity because it provides different effective wave-length. It is found that the suppression characteristic shows sharpness with as a function of the number of arms. However, these characteristics shown limitation for microstrip line structure rather than for stripline structure, so we can avoid these unwanted phenomena using stripline structure.

• 한국전자파학회논문지
• /
• 제27권12호
• /
• pp.1027-1035
• /
• 2016

본 논문에서는 VHF 대역의 능동 위상 배열 안테나에 사용하기 위한 복사소자를 소형화하는 방안에 대해 연구하였다. 이를 위하여 미엔더 라인을 갖는 다이폴 안테나를 사다리꼴 모양으로 설계하여 성능 열화는 최소화하면서 다이폴 안테나 길이를 소형화하였다. 또한, 그리드 반사기를 사용하여 지향성을 향상시키고, 외부환경에 둔감하도록 하였으며, 배열 안테나에 적용하기 위한 구조로 설계하였다. 제작된 안테나는 VSWR 2:1 기준으로 약 9.1 %의 대역폭을 가지며, 4.24 dBi의 최대 이득을 갖는다. 그리고, 전후방비(FBR)는 15 dB 이상의 양호한 특성을 나타내었다.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.33-48
• /
• 2001

For the design of suitable aquatic habitats and habitat management purposes, sensitive descriptors for aquatic areas were identified and analyzed. The classification system of the aquatic areas were developed for natural streams and modified streams in Korea. Relationships among the descriptors of an aquatic area such as channel width, meander wave length, and arc angle have been defined. The analysis indicates that the total mean sinuosity is 1.25 for the main channels of natural streams, whereas the mean value of the sinuosity of modified streams is 1.14. The mean values of the total area, the width, and the length for the sandbars of natural streams are larger than those of modified streams.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.229-238
• /
• 1996

The electromigration phenomena and the characterizations of the conductor lifetime (Time-To-Failure, TTF) in Al-1%Si thin film interconnections under D.C. and Pulsed D.C. conditions were investigated . Meander type test patterns were fabricated with the dimensions of 21080$mu \textrm{m}$ length, 3$\mu\textrm{m}$ width, 0.7$\mu\textrm{m}$ thickness and the 0.1$\mu\textrm{m}$/0.8$\mu\textrm{m}$($SiO_2$/PSG)dielectric overlayer. The current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were stressed in Al-1%Si thin film interconnection s under a D.C. condition. The peak current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were also applied under a Pulsed D.C. condition at frequencies of 200KHz, 800KHz, 1MHz, and 4MHz with the duty factor of 0.5. THe time-to-failure under a Pulsed D.C.($TTF_{pulsed D.C}$) was appeared to be larger than that under a D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition largely depends upon the appiled current densities respectively . This can be explained by a relaxation mechanism view due to a duty cycle under a Pulsed D.C. related to the wave on off. The relaxation phenomena during the pulsed off period result in the decayof excess vacancies generated in the Al-1%Si thin film interconnections because of the electrical and mechanical stress gradient . Hillocks and voids formed by an electromigration were observed by using a SEM (Scanning Electron Microscopy).