• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.616-619
• /
• 2004

This study has focused on the possibility for recycling of tailings from the Sangdong tungsten mine as powder. The experimental tests for entrapped water ratio were carried out in accordance with the specificed method by Okamura. The rheological measurements of cement paste were conducted by using a commerically digital Brookfield viscometer (Model LVDV-II+) equipped with cylindrical spindles. The results of this study, in case of cement paste mixed with tailings, entrapped water ratio was decreased with increasement of mixing ratio. Thickness of pseudo water film was increased, and mean plastic viscosity was decreased with increasing replacement.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.767-774
• /
• 2006

본 연구에서는 상동지역 중석광 광미를 콘크리트용 혼화재료로 사용하기 위한 연구의 일환으로 자기충전콘크리트의 분체로서 적용가능성을 검토하였다. 상동지역 중석광 광미를 혼합한 시멘트 페이스트의 유변학적 특성을 검토하기 위하여 구속수비 및 점도계를 이용하여 평균소성점도 및 항복응력을 측정하였으며 가상수막이론을 적용하여 검토하였다. 그리고 광미를 혼합한 자기충전콘크리트의 자기충전성 평가는 일본 토목학회에서 제시한 기준안을 적용하여 검토하였으며, 역학적 특성은 압축강도, 쪼갬인장강도 및 탄성계수를 측정하여 검토하였다. 실험결과 광미의 혼합률이 증가함에 따라 구속수비와 평균소성점도는 감소하였으며, 가상수막 두께는 증가하는 경향을 나타냈다. 또한, 광미를 혼합한 자기충전콘크리트의 자기충전성 검토 결과는 유동성 평가기준인 슬럼프 플로우 500 mm 도달시간의 경우 광미의 혼합률이 증가함에 따라 다소 증가하였고 재료 분리저항성 및 충전성 평가 결과는 기준을 만족하는 경향을 나타내고 있었다. 역학적 특성 검토 결과는 압축강도의 경우 광미의 혼합률이 증가함에 따라 압축강도는 감소하였고, 쪼갬인장강도 및 탄성계수는 보통 콘크리트의 유사한 경향을 나타내었다.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.18-38
• /
• 2002

A previous study on the model coatings based on latex-bound plastic pigment coatings (1) has been extended to latex-bound No. 1 clay, ultra-fine ground calcium carbonate (UFGCC), and clay-carbonate pigment mixture coatings, which are being widely used in the paper industry. The latex binder used was a good film-forming, monodisperse S/B latex or 0.15$\mu\textrm{m}$. No. 1 clay was representative of plate-like pigment particles, whereas UFGCC was of somewhat rounded rhombohedral pigment particlel. Both of them had negatively skewed triangular particle size distributions having the mean particle suet of 0.7${\mu}{\textrm}{m}$ and 0.6$\mu\textrm{m}$, respectively. Their packing volumes were found to be 62.5% and 657%, respectively. while their critical pigment volume concentrations (CPVC's) were determined to be 52.7% and 50.5% ( average of 45% caused by the incompatibility and 55.9% extrapolated) by coating porosity, respectively. Each pigment/latex coating system has shown its unique relationship between coating properties and pigment concentrations, especially above its CPVC. Notably, the clay/latex coating system hat shown higher coating porosity than the UFGCC/latex system at high pigment concentrations above their respective CPVC's. It was also found that their coating porosity and gloss were inter-related to each other above the CPVC's, as predicted by the theory. More interestingly, the blends of these two pigments have shown unique rheological and coating properties which may explain why such pigment blends are widely used in the industry. These findings have suggested that the unique structure of clay coatings and the unique high-shear rheology of ground calcium carbonate coatings can be judiciously combined to achieve superior coatings. Importantly, the low-shear viscosity of the blends was indicative of their unique packing and coating structure, whereas their high-shear rheology was represented by a common mixing rule, i.e., a viscosity-averaging. Transmission and scanning electron and atomic force microscopes were used to probe the state of pigment / latex dispersions, coating surfaces, freeze fractured coating cross-sections, and coating surface topography. These microscopic studies complemented the above observations. In addition, the ratio, R, of CPVC/(Pigment Packing Volume) has been proposed as a measure of the binder efficiency for a given pigment or pigment mixtures or as a measure of binder-pigment interactions. Also, a mathematical model has been proposed to estimate the packing volumes of clay and ground calcium carbonate pigments with their respective particle size distributions. As well known in the particle packing, the narrower the particle size distributions, the lower the packing volumes and the greater the coating porosity, regardless of particle shapes.