• Wind and Structures
• /
• v.19 no.5
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.

• Plant Resources
• /
• v.8 no.3
• /
• pp.235-243
• /
• 2005

The purpose of this research is to establish basic database on Cornus kousa by way of investigation, analysis and comparison of characteristics of leaf and flower, then fostering good cultivar on each morphological characteristics - leaf length, leaf width, petiole length, left lateral vein, right lateral vein. Leaf length and leaf width in Mt. Jiri shows big tendency which is 83.5 mm, 52.4 mm each in comparison with the whole mean of 72.5 mm, 41.2 mm, whereas populations of Suwon and Mt. Halla has leaf length of 66.0 mm, 65.7 mm - 9.8%, 10.4% lower value in comparison with seven mean population; leaf width is 38.4 mm, 35.3 mm - 7.3%, 16.7% lower than whole mean and shows lowest tendency among seven selected populations. Long width of flower and short width of flower in Boeun shows big tendency which is 99.9mm, 96.5 mm each in comparison with the whole mean of 76.0 mm, 73.6 mm, whereas populations of Mt. Halla has 50.1 mm, 48.2 mm which shows lowest tendency. On petal length, petal width and length of flower petiole, Boeun populations have bigger and Mt. Halla shows little tendency. The measurement result of flower colors on each population by using Spectrum Color Mater shows followings: populations of Mt. Duckyoo and Mt. Halla shows lower lightness than any other populations, but wholly shows higher lightness which is refers brightness in seven selected populations. Thus it shows peculiarities of white flower color.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.191-196
• /
• 2018

PURPOSE. The goal of this study was to evaluate the clinical outcome of single short implants, less than 8 mm in length, placed in the posterior area. MATERIALS AND METHODS. A total of 128 patients (75 male and 53 female, mean age: $52.6{\pm}11.2years$) with 154 implants participated. Implant marginal bone loss, and survival and success rates were measured. RESULTS. The mean follow-up period was $51.35{\pm}24.97months$. A total of 128 implants, 8 mm in length, were placed in patients who had mean marginal bone loss of 0.75 mm. These implants had a survival rate of 95.3%. Twenty-six implants, 7 mm in length, were placed in areas with a mean marginal bone loss of 0.78 mm and had a survival rate of 96.2%. Both marginal bone loss and survival rate were not statistically different among the groups. In the maxilla, 34 implants showed a mean marginal bone loss of 0.77 mm and a survival rate of 97.1%. In the mandible, 120 implants showed a mean marginal bone loss of 0.75 mm and a survival rate of 95.0%. The average marginal bone loss around all implants was $0.76{\pm}0.27mm$ at the last follow-up review after functional loading. The survival rate was 95.6% and success rate was 93.5%. CONCLUSION. In our study, single short implants less than 8 mm in length in the posterior areas had favorable clinical outcomes.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1161-1167
• /
• 1999

To investigate the effect of diazepam on fetal development in pregnant rats, this experiment was performed in eighty Sprague-Dawley female rats which were 8 weeks old and grouped into two according to different diazepam treatment period during 5-9 days of gestation and 10-14 days of gestation. Both experimental groups were included by saline treated groups (control) and diazepam-treated groups (6mg, 12mg and 24mg), respectively. Diazepam was injected to pregnant rats subcutaneously, which were sacrified on 20 days of gestation and mean litter size, fetal body weight, fetal crown-rump length (CRL) and pathological findings were examined. 1. Concerning mean litter size, diazepam-treated groups showed lower mean litter size than control in both 5-9 days and 10-14 days of gestation groups(p < 0.05) without difference according to dosage of diazepam and day of gestation. 2. Concerning fetal body weight, diazepam-treated groups during 5-9 days of gestation showed lower fetal body weight than control and the other treated group during 10-14 days(p < 0.01) without difference according to dosage of diazepam. Diazepam-treated group during 10-14 days of gestation showed no difference among experimented groups. 3. Concerning fetal crown-rump length (CRL), diazepam-treated groups during 5-9 days of gestation showed shorter CRL than control and the other treated group during 10-14 days of gestation(p < 0.01) without difference according to dosage of diazepam. 4. Reduction of mean litter size, fetal body weight and CRL was shown from when treated by the dosage of 6mg/kg of diazepam. 5. Maternal mortality according to dosage of the 20mg/kg of diazepam were 30% and 20% in the treated group during 5-9 days and 10-14 days of gestation, respectively. These results indicated that diazepam treatment in pregnant rats caused considerable reduction of mean litter size, fetal body weight and fetal crown-rump length when treated during 5-9 days of gestation.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.38-46
• /
• 2008

Studies on cavitation instabilities of hydrofoils and cascades are reviewed to obtain fundamental understandings of the instabilities observed in turbopump inducers. Most of them are based on the stability analysis of two-dimensional inviscid cavitating flow. The most important finding of the analysis is that the cavitation instabilities depend only on the mean cavity length. For a hydrofoil, the characteristic length is the chord length and partial/transitional cavity oscillation occurs with shorter/longer cavity than 75% of the chord length. For cascades, the characteristic length is the blade spacing and various modes of instabilities are predicted when the mean cavity is longer than 65% of the spacing. In the last part, rotating choke is shown to occur when the cavity becomes longer than the spacing.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.73-78
• /
• 2000

The Sit-and-Reach Test (SRT) is commonly nea to assess flexibility of the spine and length of the hamstring muscle, The purpose of this study was to describe hamstring muscle length as reflected by use of the SRT, the Hip Joint Angle (HJA) and Sack length(from C7 to S2) in children, to examine the correlation between Back length, SRT and HJA measurements and to examine gender differences. The 162 subjects were participated without known musculoskeletal and neurological impairments of their spine or lower exeremities. In the Long-silting position, the Back length, SRT and HJA measurements were obtained. A mean Back length value of 46.2cm, a mean SRT value of 29.4cm and a mean HJA of 77,0 degrees were obtained including all subjects. There was a strong correlation between the SRT and HJA measurements (r=.66). There were a difference between boys and girls in Back(p=.0019) and HJA measurements (p=.015). The results of this study suggest that measurements for the SRT and HJA were correlated than Back. The HJA measurements guide treatment more effectively than do Back length and SRT measurements.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.637-641
• /
• 2012

In this paper, the method that reduce a computation time by optimizing computation process is proposed to realize low-power underwater acoustic communication system. At first, dependency of decision delay on tap length of linear equalizer was investigated. Variance is calculated based on this result, and the optimal decision delay bound is estimated. In addition to decide optimal tap length with decision delay, we extracted the MSE(Mean Square Error) graph. From the graph, we obtained variance value of the MSE-decision delay, and estimated the optimum decision delay range from the variance value. Also, using the extracted optimal parameters, we performed a simulation. According to the result, the simulation employing optimal tap length, which is only 40% of maximum tap length, showed a satisfactory performance comparable to simulation employing maximum tap length. We verified that the proposed method has 33% lower tap length than maximal tap length via sea trial.

• Development and Reproduction
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2017

On the 15 days after hatching, the larvae was 4.24-5.10 mm (mean $4.66{\pm}2.18mm$) in total length, and the fins of the membrane started to develop into a fan shape and the melanophore was deposited upper the alimentary canal of the abdomen and on the bladder. At 35 days after hatching, the post-larvae formed a branch-shaped melanophore on the head part with a total length of 6.98-12.5 (mean $9.35{\pm}1.71$) mm, formed on the upper and lower parts of the caudal part, formed on the upper and lower parts of the caudal part, and deposited under the head part and abdomen. At 40 days after hatching, the juvenile was 11.3-18.1 (mean $14.9{\pm}1.53$) mm in total length.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.83-91
• /
• 1996

This paper investigates the energy absorption characteristics of thin-walled rectangular tubes. In the compact mode, the crushing process of a thin-walled tube is analyzed into 3 parts by the ratio of outward to inward fold length. The mean crush load and the half-wave folding length are determined by using minimum energy principle. The effective crush distance can be determined when half-wave folding length is known, and the number of folds is derived when crush distance is given. Thus when the crush distance is given, energy absorption capacity can be estimated with mean crush load and number of folds. And the theoretical value is proven experimentally.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.7
• /
• pp.992-1000
• /
• 1998

In the present study the behavior of laminar-wavy film flowing down a vertical plate was studied analytically. The effects of film Reynolds number and interfacial shear stress on the mean film thickness, wave amplitude, wave length, and wave celerity were analysed. The anayltical results on the periodic-wave falling film showed good agreements with experimental data for Re < 100. As the film Reynolds number increased, mean film thickness, wave amplitude, and wave celerity increased, but wave length decreased. Depending on the direction of interfacial shear stress, the shape of wavy interface was disturbed significantly, especially for the intermediate-wave. As the interfacial shear stress increased, for the periodic-wave film, wave amplitude and wave celerity increased, but mean film thickness and wave length decreased.