• 한국연소학회지
• /
• 제11권2호
• /
• pp.28-36
• /
• 2006

A constant volume combustion chamber was used to investigate the combustion characteristics. of homogeneous charge of methane-air mixture under various initial pressure, equivalence ratio and ignition times. The constant volume combustion chamber(CVCC) mostly has been studied by the experiments of visualization until now. So it is needed the numerical analysis of fluid and combustion characteristics in chamber by the more detail simulation. In this paper, the numerical analysis is tried to approach basically the homogeneous charge combustion phenomena under the various conditions, and the combustion phenomena in chamber is numerically analyzed by the commercial FIRE code. As a results, the combustion phenomena which were mean temperature, OH radical and reaction rate in chamber were investigated and it showed that the smallest flame growth occurs for the lean state and the increase of initial charged pressure condition due to the reduced OH radical.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.100-108
• /
• 2013

In aerospace industry, MTBF (Mean Time Between Failure) and MFTBF (Mean Flight Time Between Failure) are generally used for reliability analysis. So far, especially to Korean military aircraft, MFTBF of avionic equipments is predicted by MIL-HDBK-217 and MIL-HDBK-338, however, the predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This study analyzes operational data of avionic equipments. Operational MFTBF, which is calculated from operational data, is compared with predicted MFTBF calculated conventionally by military standard. In addition, failure rate trend is investigated to verify reliability growth in operational data, the investigation shows that failure rate curve from operational data has somewhat pattern with decreased failure rate and constant failure rate.

• Preventive Nutrition and Food Science
• /
• 제10권4호
• /
• pp.333-339
• /
• 2005

Three lactobacillus strains, two from infant feces, and one from cow's milk, were selected among 172 isolates, from multiple sources, for further study based on the antimicrobial activities against six strains of pathogenic bacteria and identified as Lactobacillus acidophilus. The strains revealed a wide scope of spectrum against pathogenic bacteria. Viable Lactobacillus acidophilus KH-l cell counts at pH 2.0 were slightly decreased to $1.42\times10^7$ CFU/mL from $4.18\times10^7$ CFU/mL, while remaining at $3.42\times10^7$ CFU/mL at pH 4.0 with the survival rate of $33.97\%\;and\;81.82\%$, respectively. At the concentration of $0.1\%$ oxgall, L acidophilus KH-l kept growing up to $3.12\times10^7$ CFU/mL with a mean growth rate constant (k) of 0.25, and cell number was slightly decreased to $1.21\times10^7$ CFU/mL (k=0.19) with $0.3\%$ oxgall, but remained at $7.6\times10^6$ CFU/mL (k=0.17) with $0.5\%$ oxgall. L. acidophilus KH-l had a $D_{60}$ value of 7.14, with viable cell numbers $1.4\times10^5$ CFU/mL after heat treatment at $60^{\circ}C$ for 30 minutes. Stability of L acidophilus KH-l at $-20^{\circ}C$ was significantly higher, when the strain was cultivated under the optimum growth temperature $(54.41\%\;and\;54.35\%)$ than at the temperature $(13.53\%)$.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.775-782
• /
• 2013

본 연구에서는 마찰교반용접재의 피로균열전파 거동의 공간적 불규칙성을 고찰하기 위한 연구의 일환으로써, 최적의 조건에서 마찰교반용접된 7075-T651 알루미늄 합금 용접부의 LT-방향의 각각 5개의 피로균열전파 시험편에 대하여 일정 응력확대계수범위 제어하의 피로균열전파 실험을 수행하여 마찰교반용접부의 교반용접부재(WM)와 열영향부재(HAZ) 그리고 모재(BM)에 대한 피로균열전파 거동을 실험적으로 고찰하였다. WM재의 피로균열전파율이 가장 빠르게 나타났으며, 그 다음 HAZ재와 WM재 순으로 나타났다. 게다가 시험편간 피로균열전파율의 변동성은 WM시험편에서 가장 높았고, 반면 BM재에서 가장 낮게 나타났다.

• 한국수산과학회지
• /
• 제23권5호
• /
• pp.385-393
• /
• 1990

전남 연안역에 출현하는 멸치 치어의 성장을 연구하기 위하여 전남 연안역의 3개 정점에서 1988년 5월부터 1989년 8월 사이에 정치망으로 멸치를 채집하였으며, 멸치의 연령은 이석에 나타난 성장선수로부터 결정하였다. 체장의 성장은 Gompertz의 성장식으로 표현하면 $$L =5.76{\times}E xp(1.66 \times(1- E xp(-0.44\;t)))$$, 또는 $$L=3.7{\times}E xp(1.99\times(1-E xp(-0.0614\;t)))$$로 표시된다. 20일부터 40일 사이의 평균 일일성장율은 0.38mm/day였으며, 일일성장율은 10일경에 최대를 보인후 서서히 감소하는 것으로 나타났다. 멸치의 성장은 채집시기나 채집장소에 관계없이 거의 일정한 것으로 나타났다.

• 소성∙가공
• /
• 제22권8호
• /
• pp.450-455
• /
• 2013

In the current study, a new dynamic recrystallization model for predicting high temperature flow stress is developed based on a physical model and the mean field theory. In the model, the grain aggregate is assumed as a representative volume element to describe dynamic recrystallization. The flow stress and microstructure during dynamic recrystallization were calculated using three sub-models for work hardening, for nucleation and for growth. In the case of work hardening, a single parameter dislocation density model was used to calculate change of dislocation density and stress in the grains. For modeling nucleation, the nucleation criterion developed was based on the grain boundary bulge mechanism and a constant nucleation rate was assumed. Conventional rate theory was used for describing growth. The flow stress behavior of pure copper was investigated using the model and compared with experimental findings. Simulated results by cellular automata were used for validating the model.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.191-196
• /
• 1999

수열합성법을 이용한 $\alpha$-$SiO_2$ 단결정 분말 제조시 교반의 추가와 승온속도의 변화가 입자의 결정성, 입도분포 및 평균입경에 미치는 영향을 조사하였다. KOH를 광화제로 사용하였으며, $350^{\circ}C$에서 3시간 동안 반응을 시켜 평균입자 크기가 1~3.2$\mu\textrm{m}$인 결정 분말을 제조하였다. 실험결과 반응초기부터 교반을 한 경우에는 교반속도가 증가함에 따라 평균입경이 감소했으나, 결정성은 나빠지다가 150r/min 이상에서는 다시 좋아졌다. 또한 반응 도중에 교반을 추가하면 반응초기부터 교반을 한 경우보다 입자의 크기가 커졌다. 그러나 교반속도를 일정하게 한 후 승온속도를 느리게 하면 입자의 크기가 작아졌다.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.184-191
• /
• 2009

In a technological driven environment, a depreciation estimate which is based on traditional life analysis results in a decelerated rate of capital recovery. This time pattern of technological growths models needs to be incorporated into life analysis framework especially in those industries experiencing fast technological changes. The approximation technique for calculating the variance can be applied to the six growth models that were selected by the degree of skewness and the transformation of the functions. For the Pearl growth model, the Gompertz growth model, and the Weibull growth model, the errors have zero mean and a constant variance over time. However, transformed models like the linearized Fisher-Pry model, the linearized Gompertz growth model, and the linearized Weibull growth model have increasing variance from zero to that point at which inflection occurs. It can be recommended that if the variance of error over time is increasing, then a transformation of observed data is appropriate.

• 한국미생물·생명공학회지
• /
• 제9권4호
• /
• pp.231-236
• /
• 1981

성홍열, 단독, 패혈증의 원인균인 Streptococcus pyogenes중에서 항암효과가 좋은 균주를 선정하여 항암제 생산을 위한 기초실험으로서 열 처리에 따른 적정 살균조건을 검토하여 다음과 같은 결과를 얻었다. Streptococcus pyogenes의 생육 최적온도는 37$^{\circ}C$이었고 대수기에서 평균 세대시간은 20분이었으며, 5$0^{\circ}C$ 이상으로 열 처리하면 생존균이 감소하였다. 균 현탁액을 pH6, 7, 8, 9로 조절한 후, 5$0^{\circ}C$에서 열 처리하였을 때는 대수적으로 사멸하였고, 사멸속도상수 k값은 각각 0.1448, 0.1194, 0.1273, 0.1707(min.$^{-1}$)이었으나 60, 70, 80, 9$0^{\circ}C$로 열 처리하면 10분만에 99%이상이 사멸되었으며 10$0^{\circ}C$에서는 완전히 사멸되었다.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.66-70
• /
• 1997

A mixed-culture of Gluconobacter suboxydans IFO 3172 and Saccharomyces uvarum IFO 0751 was per-formed in a synthetic medium. the optimal inculum ratio of G. suboydans and S. uvarum for mixed-culture fermentation was 150:1. The optimum pH, incubation temperature and aeration rate for mixed-culture fer- mentation were 5.0, 3$0^{\circ}C$ and 2.25vvm, reapectively. As a result of batch pure-and mixed-culture fer-mentation, specific growth rate in pure-culture of both strain was lower than that in mixed-culture. The yield of cell mass from S. uvarum exclusively decreased. The growth rate of the mixed-culture was very similar to the pure-culture in the begining of culture, but it has been decreased after 16hrs. In the mean time, S. uvarum in mixed-culture fermentation could grow due to fructose converted, but it could not row in pure-culture fermentation. Thus, the relationship was a sort of commensalism. The kinetic parameters cal-culated through steady-state results during continuous fermentations are as follows :{TEX}$$\mu$_{max1}${/TEX}=0.118({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{1}${/TEX}=0.330(g/L),:{TEX}$$\mu$_{max2}${/TEX}=0.162({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{2}${/TEX}=0.038(g/L). The yield of bacterial cell mass relatively constant, but yield of yest cell mass was gradually decreased.