• Journal of the Korean Society of Combustion
• /
• v.11 no.2
• /
• pp.28-36
• /
• 2006

A constant volume combustion chamber was used to investigate the combustion characteristics. of homogeneous charge of methane-air mixture under various initial pressure, equivalence ratio and ignition times. The constant volume combustion chamber(CVCC) mostly has been studied by the experiments of visualization until now. So it is needed the numerical analysis of fluid and combustion characteristics in chamber by the more detail simulation. In this paper, the numerical analysis is tried to approach basically the homogeneous charge combustion phenomena under the various conditions, and the combustion phenomena in chamber is numerically analyzed by the commercial FIRE code. As a results, the combustion phenomena which were mean temperature, OH radical and reaction rate in chamber were investigated and it showed that the smallest flame growth occurs for the lean state and the increase of initial charged pressure condition due to the reduced OH radical.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.100-108
• /
• 2013

In aerospace industry, MTBF (Mean Time Between Failure) and MFTBF (Mean Flight Time Between Failure) are generally used for reliability analysis. So far, especially to Korean military aircraft, MFTBF of avionic equipments is predicted by MIL-HDBK-217 and MIL-HDBK-338, however, the predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This study analyzes operational data of avionic equipments. Operational MFTBF, which is calculated from operational data, is compared with predicted MFTBF calculated conventionally by military standard. In addition, failure rate trend is investigated to verify reliability growth in operational data, the investigation shows that failure rate curve from operational data has somewhat pattern with decreased failure rate and constant failure rate.

• Preventive Nutrition and Food Science
• /
• v.10 no.4
• /
• pp.333-339
• /
• 2005

Three lactobacillus strains, two from infant feces, and one from cow's milk, were selected among 172 isolates, from multiple sources, for further study based on the antimicrobial activities against six strains of pathogenic bacteria and identified as Lactobacillus acidophilus. The strains revealed a wide scope of spectrum against pathogenic bacteria. Viable Lactobacillus acidophilus KH-l cell counts at pH 2.0 were slightly decreased to $1.42\times10^7$ CFU/mL from $4.18\times10^7$ CFU/mL, while remaining at $3.42\times10^7$ CFU/mL at pH 4.0 with the survival rate of $33.97\%\;and\;81.82\%$, respectively. At the concentration of $0.1\%$ oxgall, L acidophilus KH-l kept growing up to $3.12\times10^7$ CFU/mL with a mean growth rate constant (k) of 0.25, and cell number was slightly decreased to $1.21\times10^7$ CFU/mL (k=0.19) with $0.3\%$ oxgall, but remained at $7.6\times10^6$ CFU/mL (k=0.17) with $0.5\%$ oxgall. L. acidophilus KH-l had a $D_{60}$ value of 7.14, with viable cell numbers $1.4\times10^5$ CFU/mL after heat treatment at $60^{\circ}C$ for 30 minutes. Stability of L acidophilus KH-l at $-20^{\circ}C$ was significantly higher, when the strain was cultivated under the optimum growth temperature $(54.41\%\;and\;54.35\%)$ than at the temperature $(13.53\%)$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.775-782
• /
• 2013

In this study, as a series of studies aimed at investigating the spatial randomness of fatigue crack growth for friction stir welded (FSWed) 7075-T651 aluminum alloy joints, the fatigue crack growth behavior of FSWed 7075-T651 aluminum alloy joints was investigated for LT orientation specimens. Fatigue crack growth tests were conducted under constant stress intensity factor range (SIFR) control for 5 specimens of the FSWed 7075-T651 aluminum alloy, including base metal (BM), heat affected zone (HAZ), and weld metal (WM) specimens. The mean fatigue crack growth rate of WM specimens was found to be the highest, whereas that of HAZ and WM specimens was the lowest. Furthermore, the variability of fatigue crack growth rate was found to be the highest in WM specimens and lowest in BM specimens.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.5
• /
• pp.385-393
• /
• 1990

Age and growth in length of anchovy juveniles were analysed from the samples collected from the coastal waters of Chonnam, Korea, in 1988 and 1989. Ages in days were determined by counting growth increments in otolith from 248 individuals. Growth in length versus age in days was well represented by Gompertz curve: $$L =5.76{\times}E xp(1.66 \times(1- E xp(-0.44\;t)))$$, or $$L=3.7{\times}E xp(1.99\times(1-E xp(-0.0614\;t)))$$. The mean growth rate was 0.38 mm/day from 20 days to 40 days. Growth rate was maximum at 10 days, and then decreased gradually. The growth of anchovy juvenile were nearly constant inspite of the sampling dates or stations.

• Transactions of Materials Processing
• /
• v.22 no.8
• /
• pp.450-455
• /
• 2013

In the current study, a new dynamic recrystallization model for predicting high temperature flow stress is developed based on a physical model and the mean field theory. In the model, the grain aggregate is assumed as a representative volume element to describe dynamic recrystallization. The flow stress and microstructure during dynamic recrystallization were calculated using three sub-models for work hardening, for nucleation and for growth. In the case of work hardening, a single parameter dislocation density model was used to calculate change of dislocation density and stress in the grains. For modeling nucleation, the nucleation criterion developed was based on the grain boundary bulge mechanism and a constant nucleation rate was assumed. Conventional rate theory was used for describing growth. The flow stress behavior of pure copper was investigated using the model and compared with experimental findings. Simulated results by cellular automata were used for validating the model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.191-196
• /
• 1999

Effects of agitation and heating rate on crystallinity, size distribution and mean size of $\alpha$-$SiO_2$powder prepared hydrothermally were investigated. $\alpha$-$SiO_2$crystalline powder, in mean particle size of 1~3.2 $\mu\textrm{m}$, was obtained at $350^{\circ}C$ using KOH as a mineralized for a 3 h reaction. Experimental results showed that particle size became smaller as the rate of agitation increased if it was introduced from the beginning of reaction, however, crystallinity was reduced at the low rate of agitation and it was became enhanced at above 150 r/min. Particle size became larger if agitation was introduced at any time during the reaction rather than introduced from the beginning of reaction. It was also found that particle size became smaller if heating rate was reduced, while the rate of agitation kept constant.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.184-191
• /
• 2009

In a technological driven environment, a depreciation estimate which is based on traditional life analysis results in a decelerated rate of capital recovery. This time pattern of technological growths models needs to be incorporated into life analysis framework especially in those industries experiencing fast technological changes. The approximation technique for calculating the variance can be applied to the six growth models that were selected by the degree of skewness and the transformation of the functions. For the Pearl growth model, the Gompertz growth model, and the Weibull growth model, the errors have zero mean and a constant variance over time. However, transformed models like the linearized Fisher-Pry model, the linearized Gompertz growth model, and the linearized Weibull growth model have increasing variance from zero to that point at which inflection occurs. It can be recommended that if the variance of error over time is increasing, then a transformation of observed data is appropriate.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.231-236
• /
• 1981

Studies were made on the optimal conditions of sterilization for Streptococcus pyogenes treated with heat. The results were as follows: The optimal temperature on growth of Streptococcus pyogenes was 37$^{\circ}C$ and mean generation time was 20 minutes in the logarithmic growth phase. The suspension of Streptococcus pyogenes, adjusted to pH 6-9 and treated with heat at 5$0^{\circ}C$, showed logarithmic death rate. Specific death rate constant(k) values at pH 6-9 were 0.1448, 0.1194. 0.1273 and 0.1707 minute$^{-1}$ , respectively.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.66-70
• /
• 1997

A mixed-culture of Gluconobacter suboxydans IFO 3172 and Saccharomyces uvarum IFO 0751 was per-formed in a synthetic medium. the optimal inculum ratio of G. suboydans and S. uvarum for mixed-culture fermentation was 150:1. The optimum pH, incubation temperature and aeration rate for mixed-culture fer- mentation were 5.0, 3$0^{\circ}C$ and 2.25vvm, reapectively. As a result of batch pure-and mixed-culture fer-mentation, specific growth rate in pure-culture of both strain was lower than that in mixed-culture. The yield of cell mass from S. uvarum exclusively decreased. The growth rate of the mixed-culture was very similar to the pure-culture in the begining of culture, but it has been decreased after 16hrs. In the mean time, S. uvarum in mixed-culture fermentation could grow due to fructose converted, but it could not row in pure-culture fermentation. Thus, the relationship was a sort of commensalism. The kinetic parameters cal-culated through steady-state results during continuous fermentations are as follows :{TEX}$$\mu$_{max1}${/TEX}=0.118({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{1}${/TEX}=0.330(g/L),:{TEX}$$\mu$_{max2}${/TEX}=0.162({TEX}$h^{-1}${/TEX}), {TEX}$Ks_{2}${/TEX}=0.038(g/L). The yield of bacterial cell mass relatively constant, but yield of yest cell mass was gradually decreased.