• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.29-35
• /
• 2007

This study was examined adsorption ability of heavy metal Hg(I), Pb(II), and U(Vl) ion use of fruit from schizandra chinensis, The fruits of schizandra chinensis sample used breaking into fragments $50{\sim}100$ mesh. The sample solution was mixed fruits of schizandra chinensis and heavy metal ion. Each heavy metal ion of into solution was quantum analysis with ICP-AES. As the result, each condition of maxium adsorption ability of heavy metal ion was high in the range of pH 5-7, adsorption time was about 15 minutes, and the optimum temperature was $100^{\circ}C$. The heavy metal ion was increased adsorption in order of increasing concentration and in ethanol solution better than in aqueous solution.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.2
• /
• pp.230-235
• /
• 2003

A 1.25 kb DNA fragment including the lscR gene, which encodes a levansucrase of Rahnella aquatilis ATCC 15552, was subcloned into a high-expression vector, pET-29b, and the recombinant enzyme was overexpressed in Escherichia coli. Most of the levansucrase activity was detected in the cytoplasmic fraction after induction with isopropyl ${\beta}-D-thiogalactoside$. The recombinant enzyme with a tag of six histidine residues at the C-terminus was purified 146-fold by affinity and gel-filtration chromatographies. The molecular mass of the purified LscR was approx. 49 kDa as determined by SDS-PAGE. The optimum pH and temperature of this enzyme for levan formation was pH 6.0 and $30^{\circ}C$, respectively. The optimum substrate concentration for levan formation was 300 mM sucrose. Levan formation was increased by the increase of the enzyme concentrations. Maxium yield of levan formation at optimum substrate concentration, pH, and temperature after 24 h of reaction was approximately 80%.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.6
• /
• pp.897-904
• /
• 2011

For set up the processing method of Byeo-Nuruk, we investigated the quality characteristics of Byeo-Nuruk according to the mixture ratio of rice and wheat, as well as the addition rate of moisture. After 12 hours of incubation, the temperature of Nuruk increased dramatically and reached a maxium temperature at 36 hours. After 36 hours, the temperature decreased gradually and was maintained at about $31{\sim}38^{\circ}C$. The ranges of pH and titratable acidity of Byeo-Nuruk were 4.85 to 7.42 and 1.0 to 2.3, respectively. A higher content of wheat ratio in Byeo-Nuruk, was associated with higher enzyme activities of ${\alpha}$-amylase, glucoamylase, and acidic-protease. Further, at a 70% wheat ratio, a 25% addition rate of moisture showed the highest enzyme activity. In the mixture ratio between rice and wheat, the 50:50 and 30:70 treatments contained the highest levels of microorganisms.

• Journal of Korea Foundry Society
• /
• v.14 no.6
• /
• pp.548-557
• /
• 1994

Grey iron containing a small amount of Cu and Mo to improve the effect of heat treatment and microstructures were poured in to the mold and them austenized at $900^{\circ}C$. After austenitizing the specimens of castings were austempered $210^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$ and $350^{\circ}C$. The effects of matrix structures, mechanical properties and wear characteristics were investigated by austempering temperatures. Tensile strength and hardness of austempered grey iron are increased and the amount of retained austenite is decreased as austempering temperature is lower even though the amount of retained autenite in it only 4%. The amount of rolling wear loss are increased as rolling revolution is increased and wear loss of austempered grey iron under dry rolling condition is characterized by three models; initial wear, stationary wear and abnormal wear. It has been found that the amount of wear loss was increased with increasing maxium compressive stress and rolling revolution.

• Journal of Life Science
• /
• v.8 no.1
• /
• pp.85-90
• /
• 1998

Pseudomonas sp. KH2-2 had the denitrifying ability adn was isolated from the denitrifier consortium in order to remove nitrogen compounds from waste water in aquaculture system. When this strain was reached stationary phase, it has the maxium denitrification activity. Denitrification activity of the isolated strain was shown the growth associated pattern. Optimal temperature for cell growth and denitrification activity was 40$\circ$C and optimal pH was 7.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.36-41
• /
• 2008

In this paper, we study The Effects of PV Cell's Electrical Characteristics for PV Module Application. Photovoltaic module consists of serially connected solar cell which has low open circuit voltage and high short circuit current characteristics. The whole current flow of PV module is restricted by lowest current of one solar cell. For the experiment, we make PV module composing the solar cells that have short circuit current difference of 0%, 1%, 3% and Random. The PV module exposed about 35days, its the maximum power drop ratio was 4.282% minimum and 6.657% maximum. And PV module of low current characteristics has electrical stress from other modules. The solar cell temperature of PV module was higher compared to PV cell. To prevent early degradation, it is need to have attention to PV cell selection.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.167-170
• /
• 2000

Proteolytic hydrolysis is one of the main enzymatic reaction of waste activated sludge (WAS) digestion. Pretense excreted from Bacillus stearothermophilus (ATCC 31197) showed optimum temperature of $75^{\circ}C$ for maxium heat stable proteolytic activity against azo casein. The dependency of $Ca^{2+}$, $Zn^{2+}$ on heat stability of proteolytic enzymes were measured with various concentrations. It was shown that $Ca^{2+}$ ion enhanced heat stability of these enzymes. Then thermophilic aerobic digestion (TAD) was performed using B. sterothermophilus with the addition of divalent ions. Performance of TAD process with ATCC 31197 activated by $Ca^{2+}$, $Zn^{2+}$ions in terms of dissolved organic carbon (DOC) concentration, extracellular protein concentration, and scanning electrion microscopy (SEM) analysis. The best result of protein reduction concentration in digestion test was obtained with the addition of 2 mM $Ca^{2+}$ ion.

• YAKHAK HOEJI
• /
• v.48 no.6
• /
• pp.384-390
• /
• 2004

Polyphenol oxidase-catalyzed oxidation of substrates (t-butylcatechol, 4-methylcatechol, chlorogenic acid, caffeic acid and pyrocatechol) were performed in the Ph range 4~8. Co ncentrations of substrate's major oxidation products were monitored by high performance liquid chromatograph. The nature and amounts of products formed were highly pH dependent. They also were ifluenced by kinds of substrates. Major oxidation product of 4-methylcatechol appeared the maxium value at pH 5, them of chlorogenic acid, caffeic acid and pyrocatechol at pH 6.0 and that of t-butylcatechol at pH 5~7. Time-dependent PPO activity was determined at $4^{\circ}C\;and\;30^{\circ}C$. PPO extracted by phosphate buffer containing triton X-114 (t-PPO) was more stable than PPO by phosphate buffer (b-PPO). The result of electrophoresis, at first PPO was showed only a band at 48 kd. After 1~3 days a partial degrade band was appeared in b-PPO and three partial degrade bands in t-PPO. No activity band was appeared in PPOs at $30^{\circ}C$ and b-PPO at $4^{\circ}C$ after 4 days. And a band (37 kDa) in t-PPO was remained finally and disappered. PPO from Perillae leaves has two activity bands at 48 and 37 kDa in previous paper. It was supposed that PPO in the leaves of Perilla frutescens was a protein having one molecular weight as 48 kDa. And 37 kDa protein, relatively proteolysis-resistant, was a proteolyzed form of a major form.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.875-884
• /
• 2000

Sea fog/stratus is very difficult to detect because of the characteristics of air-sea interaction and locality ,and the scantiness of the observed data from the oceans such as ships or ocean buoys. The aim of our study develops new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggests the technics of its continuous detection. In this study, atmospheric synoptic patterns on sea fog day of May, 1999 are classified; cold air advection type(OOUTC, May 10, 1999) and warm air advection type(OOUTC, May 12, 1999), respectively, and we collected two case days in order to analyze variations of water vapor at Osan observation station during May 9-10, 1999.So as to detect daytime sea fog/stratus(OOUTC, May 10, 1999), composite image, visible accumulated histogram method and surface albedo method are used. The characteristic value during day showed A(min) .20% and DA < 10% when visible accumulated histogram method was applied. And the sea fog region which is detected is similar in composite image analysis and surface albedo method. Inland observation which visibility and relative humidity is beneath 1Km and 80%, respectively, at OOUTC, May 10,1999; Poryoung for visble accumulated histogram method and Poryoung, Mokp'o and Kangnung for surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), IR accumulated histogram method and Maximum brightness temperature method are used, respectively. Maxium brightness temperature method dectected sea fog better than IR accumulated histogram method with the charateristic value that is T_max < T_max_trs, and then T_max is beneath 700hPa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which is detected by Maxium brighness temperature method was similar to the result of National Oceanic and Atmosheric Administratio/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference), but usually visibility and relative humidity are not agreed well in inland.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.