• 제목/요약/키워드: maximum methane production rate

검색결과 59건 처리시간 0.037초

혐기성소화의 물질분해 및 메탄생성에 대한 $CO_2$ 분압의 영향 (Effects of $PCO_2$ on Methane Production Rate and Matter degradation in Anaerobic Digestion)

  • 이국의;김영철;서명교
    • 한국환경보건학회지
    • /
    • 제26권2호
    • /
    • pp.59-66
    • /
    • 2000
  • Effects of carbon dioxide partial pressure(PCO2) on bacterial population, methane production rate and matter degradation in anaerobic digestion were investigated by using anaerobic chemostat type reactors at 35$\pm$1$^{\circ}C$, at the HRT of 7 days. At PCO2 of 0.5 atm, the specific methane production rate and specific substrate removal rate reached the maximum rates. The methane production rates in the reactors fed by mixed substrate were 26% higher than those obtained under the controlled condition. The number of acetate consuming methanogenic bacteria enumerated by the MPN(most probable number) method, decreased when PCO2 exceeded 0.7 atm. Hydrogen consuming methanogenic bacteria and homoacetogenic bacteria increased as PCO2 increased from 0.1 to 0.6 atm, however, decreased slightly at PCO2 above 0.7 atm. The number of hydrolytic bacteria, sulfate-reducing bacteria and H2-producing acetogenic bacterial were not much influenced by the change of PCO2. The potential methanogenic activity reached the maximum at PCO2 0.5 atm, however, decreased significantly when PCO2 exceeded 0.7 atm, would depend on free PCO2 concentration in solution.

  • PDF

혐기성 소화를 통한 돈분의 메탄 생성 특성 (Characteristics of Methane Production from Piggery Manure Using Anaerobic Digestion)

  • 이채영
    • 유기물자원화
    • /
    • 제15권3호
    • /
    • pp.113-120
    • /
    • 2007
  • 최종 메탄수율, 동력학적 상수 및 최대 메탄발생 속도 등 돈분의 메탄생성 특성을 평가하기 위하여 혐기성 회분식 실험을 수행하였다. 돈분의 혐기성 분해 동력학적 거동 평가시 1차 반응으로 기정하였으며 최종 메탄수율, 동력학적 상수 및 최대 메탄발생 속도는 각각 0.27~0.44L $CH_4/gVS$, $0.161{\sim}0.280d^{-1}$ 및 0.043~0.120L $CH_4/d$로 나타났다. 돈분 자체를 식종물질로 사용하는 경우 장기간의 초기 순응기간이 소요되었으나 최종 메탄수율에는 차이가 없는 것으로 나타났다. 돈분의 혐기성 처리는 효과적이나 고형물의 함량이 높은 경우 이상 혐기성 소화가 단상 혐기성 소화에 비해 효과적인 것으로 판단된다.

  • PDF

산소부화 압축착화기관을 이용한 메탄으로부터 수소 생산 (Hydrogen Gas Production from Methane Reforming Using Oxygen Enriched Compression Ignition Engine)

  • 임문섭;홍성인;홍명석;전영남
    • 한국대기환경학회지
    • /
    • 제23권5호
    • /
    • pp.557-562
    • /
    • 2007
  • The purpose of this paper is to investigate the reforming characteristics and maximum operating condition for the hydrogen production by methane reforming using the compression ignition engine induced partial oxidation. An dedicated compression engine used for methane reforming was decided operating range. The partial oxidation reforming was investigated with oxygen enrichment which can improve hydrogen production, compared to general reforming. Parametric screening studies were achieved as $O_2/CH_4$ ratio, total flow rate, and intake temperature. When the variations of $O_2/CH_4$ ratio, total flow rate, and intake temperature were 1.24, 208.4 L/min, and $400^{\circ}C$, respectively, the maximum operating conditions were produced hydrogen and carbon monoxide. Under the condition mentioned above, synthetic gas were $H_2\;22.77{\sim}29.22%,\;CO\;21.11{\sim}23.59%$.

잉여슬러지의 초음파 처리에 의한 혐기성 소화에서의 메탄생성 특성 연구 (Characteristics of Anaerobic Methane Production by Ultrasonic Treatment of Excess Sludge)

  • 이종학;정태영;노현석;김동진
    • 한국물환경학회지
    • /
    • 제26권5호
    • /
    • pp.810-815
    • /
    • 2010
  • Ultrasonic sludge pre-treatment has been studied to enhance the performance of anaerobic digestion by increasing sludge hydrolysis which is regarded as the rate-limiting-step of anaerobic digestion. In this study, the effect of ultrasonic pre-treatment on sludge hydrolysis (solubilization) and methane production was investigated. Sludge solubilization efficiency increased with ultrasonic energy input. However, it is uneconomical to apply more than 720 kJ/L as the solubilization efficiency per energy input declines afterwards. Volatile fatty acids concentration increased after the ultrasonic sludge hydrolysis. Anaerobic batch digestion showed that methane volume reached 64.7 and 84.5 mL after 18 days of incubation with the control sludge and ultrasonically hydrolyzed sludge, respectively. Methane production potential, maximum methane production rate, and the lag time of modified Gompertz equation were changed from 70 mL, 6.4 mL/day, and 1.2 days to 89 mL, 9.6 mL/day, and 0.5 day, respectively, after the ultrasonic sludge treatment. The results proved that ultrasonic pre-treatment contributed significantly not only for the methane production but also for the reduction of anaerobic digestion time which is critical for the performance of anaerobic sludge digestion.

Potential Methane Production on Anaerobic Co-digestion of Swine Manure and Food Waste

  • Shin, Joung-Du;Park, Sang-Won;Kim, Sang-Hyoun;Duangmanee, Jack;Lee, Po-Heng;Sung, Shi-Hwu;Lee, Bong-Hoon
    • 한국환경농학회지
    • /
    • 제27권2호
    • /
    • pp.145-149
    • /
    • 2008
  • Anaerobic co-digestion of swine manure and food waste for biogas production was performed in serum bottles at various volatile solids(VS) contents and mixing ratios of two substrates(swine manure:food waste=$100:0{\sim}0:100$). Through kinetic mode of surface methodology, the methane production was fitted to a Gompertz equation. The ultimate methane production potential of swine manure alone was lower than that of food waste regardless of VS contents. However, it was appeared that maximum methane production potentials in 80 : 20 of the mixing rate at VS 3% was enhanced at 144.7%, compared to its only swine manure. The potential increased up to 815.71 ml/g VS fed as VS concentration and food composition increased up to 3.0% and 20%, respectively. The ultimate amount of methane produced had significantly a positive relationship with that of methane yield rate. Overall, it would be strongly recommended that feeding stocks use 20% of mixing ratio of food waste based on VS 3% contents when operating the anaerobic reactor on site at $35^{\circ}C$ if not have treatment of its anaerobic waste water.

UASB를 적용한 이상 혐기공정 granule에 의한 양돈폐수의 바이오가스 생성과 생분해 특성 평가 (A Characteristics of Biogas Recovery and Biodegradability of Piggery Wastewater Using Granule of Two-Phase Anaerobic Process with UASB)

  • 오성모;배윤선;박철휘
    • 상하수도학회지
    • /
    • 제21권3호
    • /
    • pp.315-322
    • /
    • 2007
  • The purpose of this study was to investigate the biodegradability and performance of organic removal and methane production rate when treating piggery wastewater using a granule of two-phase anaerobic process applied UASB. BMP test was conducted as simple means to monitor relative biodegradability of substrate and to determine methane production of an organic material. The two-phase anaerobic process is consisted of a continuous flow stirred-tank reactor (CFSTR) for the acidification phase and an Upflow Anaerobic Sludge Blanket reactor (UASB) for the methanogenesis. The acidogenic reactor played key roles in reducing the periodically applied shock-loading and in the acidification of the influent organics. A stable maximum biogas production rate was 400mL. The methane contents ranged from 73 to 80% during the experimental period. It is known that most of the removed organic matter was converted to methane gas, and the produced biogas might be high quality for its subsequent use.

혐기 소화 시 식물체 잔사 및 투입량에 따른 메탄 생산량 예측 (Predicting Methane Production on Anaerobic Digestion to Crop Residues and Biomass Loading Rates)

  • 신중두;홍승길;박상원;김현욱
    • 유기물자원화
    • /
    • 제24권3호
    • /
    • pp.75-82
    • /
    • 2016
  • 본 연구의 목적은 농업에서 발생하는 식물체 잔사 종류별 투입비율에 따른 메탄 잠재 발생량을 예측하는 것이다. 바이오가스를 생산하기 위하여 보릿짚 및 유채대 등의 식물체 잔사를 다양한 투입율로 사용하여 세륨병에서 실험을 수행하였다. 표면 방법론의 운동방법을 통하여 메탄 생산은 Gomperz 수식에 적합한 것으로 나타났다. 중온소화 시 식물체 잔사별 바이오가스 생산에 있어, 최대생산량은 보릿짚 및 유채대 투입율 1%로 혐기소화 후 각각 6.8일에 37.2 mL/g과 7.5일에 28.0 mL/g로 나타났다. 중온소화 시 메탄 함량은 보릿짚 및 유채대 투입율 5%로 혐기소화 후 각각 5.5일에 61.7%와 3.4일에 75.0%로 가장 높게 관측되었다. 중온 소화시 최대 메탄 잠재발생량은 1% 보릿짚 투입율에서 159.59 mL/g 와 3% 유채대 투입율에서 156.62 mL/g로 산정되었다. 전반적으로 중온소화 시 바이오매스 투입율은 유채대 3% 및 보릿짚 1%를 투입하는 것이 적정 비율인 것으로 나타났다.

Microbial and Physicochemical Monitoring of Granular Sludge During Start-up of Thermophilic UASB Reactor

  • Ahn, Yeong-Hee;Park, Sung-Hoon
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.378-384
    • /
    • 2003
  • Mesophilically-grown granular sludge seeded in thermophilic UASB reactor was monitored to better understand the start-up process of the reactor. The reactor was fed with a synthetic wastewater containing glucose. As COD loading rate increased stepwise, methane production rate increased. Maximum values of COD removal efficiency (95%) and methane production rate (5.3 l/day) were achieved by approximately day-80 and remained constant afterward. However, physicochemical and microbial properties of granules kept changing even after day-80. Specific methanogenic activity (SMA) was initially negligible, and increased continuously until day-153 and remained constant afterward, showing the maximum value of $1.51{\pm}0.13\;g\;CH_4-COD/g$ VSS/day. Deteriorated settling ability of granules recovered the initial value by day-98 and was maintained afterward, as determined by sludge volume index. Initially reduced granule size increased until day-126, reaching a plateau of 1.1 mm. Combined use of fluorescence in situ hybridization and confocal laser scanning microscopy (CLSM) allowed to localize families of Methanosaetaceae and Merhanosarcinaceae in granules with time Quantitative analyses of CLSM images of granule sections showed abundance patterns of the methanogens and numerical dominance of Methanosaeta spp. throughout the start-up period. The trend of SMA agreed well with abundance patterns of the methanogens.

3상 교류 부채꼴 방전을 이용한 메탄으로부터 수소 생산 (Production of Hydrogen from Methane by 3phase AC GlidArc Plasma)

  • 전영남;김성천;임문섭
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2232-2237
    • /
    • 2007
  • Steam reforming and catalytic reforming of $CH_4$ conversion to produce synthesis gas require both high temperatures and high pressure. Non-thermal plasma is considered to be a promising technology for the hydrogen rich gas production from methane. In this study, three phase AC GlidArc plasma system was employed to investigate the effects of gas composition, gas flow rate, catalyst reactor temperature and applied electric power on the $CH_4$ and $H_2$ yield and the product distribution. The studied system consisted of three electrode and it connected AC generate power system different voltages. In this study, air was used for the partial oxidation of methane. The results showed that increasing gas flow rate, catalyst reactor temperature, or electric power enhanced $CH_4$ conversion and $H_2$ concentration. The reference conditions were found at a $O_2$/C molar ratio of 0.45, a feed flow rate of 4.9 ${\ell}$/min, and input power of 1kW for the maximum conversions of $CH_4$ with a high selectivity of $H_2$ and a low reactor energy density.

  • PDF

열전처리와 반응조 형태가 고형 유기물의 혐기성 처리에 미치는 영향 (Effects of Heat Pre-Treatment and Reactor Configurations on the Anaerobic Treatment of Volatile Solids)

  • 홍영석;배재호
    • 상하수도학회지
    • /
    • 제10권2호
    • /
    • pp.104-116
    • /
    • 1996
  • Anaerobic digestion is generally used for the treatment of volatile organic solids such as manure and sludge from waste water treatment plants. However, the reaction rate of anaerobic process is slow, and thus it requires a large reactor volume. To minimize such a disadvantage, physical and chemical pre-treatment is generally considered. Another method to reduce the reactor size is to adopt different reactor system other than CSTR. In this paper, the effects of heat pre-treatment and reactor configurations on the anaerobic treatability of volatile solids was studied. Carrot, kale, primary sludge, and waste activated sludge was chosen as the test materials, and the BMP method was used to evaluate the maximum methane production and first order rate constants from each sample. After the heat treatment at $130^{\circ}C$ for 30min., the measured increase in SCOD per gram VS was up to 394 mg/L for the waste activated sludge. However, the methane production potential per gram VS was increased for only primary and waste activated sludge by 17-23%, remaining the same for carrot and kale. The overall methane production process for the tested solids can be described by first order reactions. The increased in reaction constant after heat pre-treatment was also more significant for the primary and waste activated sludge than that for carrot and kale. therefore, the heat pre-treatment appeared to be effective for the solids with high protein contents rather than for the solids with high carbohydrate contents. Among the four reactor systems studied, CSTR, PFR, CSTR followed by PFR, and PFR with recycle, CSTR followed by PFR appeared to be the best choice considering methane conversion rate and the operational stability.

  • PDF