• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.363-376
• /
• 2022

An area under construction for a living facility collapsed around 12:48 KST on 13 January 2021 in Sa-dong, Ansan-si, Gyeonggi-do. There were no casualties due to the rapid evacuation measure, but part of the temporary retaining facility collapsed, and several cracks occurred in the adjacent road on the south side. This study used the potential of synthetic aperture radar (SAR) satellite for surface property changes that lies in backscattering characteristic to map the collapsed structure. The interferometric SAR technique can make a direct measurement of the decorrelation among different acquisition dates by integrating both amplitude and phase information. The damage proxy map (DPM) technique has been employed using four high-resolution Constellation of Small Satellites for Mediterranean basin Observation (COSMO-SkyMed) data spanning from 2020 to 2021 during ascending observation to analyze the collapse of the construction. DPM relies on the difference of pre- and co-event interferometric coherences to depict anomalous changes that indicate collapsed structure in the study area. The DPMs were displayed in a color scale that indicates an increasingly more significant ground surface change in the area covered by the pixels, depicting the collapsed structure. Therefore, the DPM technique with SAR data can be used for damage assessment with accurate and comprehensive detection after an event. In addition, we classify the amplitude information using support vector machine (SVM) and maximum likelihood classification algorithms. An investigation committee was formed to determine the cause of the collapse of the retaining wall and to suggest technical and institutional measures and alternatives to prevent similar incidents from reoccurring. The report from the committee revealed that the incident was caused by a combination of factors that were not carried out properly.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.342-349
• /
• 2001

This study was carried out to classify and evaluate the land cover map using Landsat TM data in Pyeongtaeg City. DGPS data, aerial photography, topographical map were used for selection the training sets and accuracy assessment. The overall accuracy and Kappa coefficient of the land cover classification map(using supervised classification with 13 classes) with Landsat TM data(16 June. 1997) were respectively, 86.8%, 85.4%, but the user's accuracy of urban/village and vinyl-house was below 60%, and the producer's accuracy of read and vinyl-house below 70%. Maybe it was caused the spectral reflectance characteristics, heterogeneity and small distribution area on the artificial things such as urban/village, vinyl_house and road, etc. And then, the agricultural land cover classification system using remote sensing data in Korea was to classify level I and II. Level I consisted of 5 classes such as agricultural land, forest land, water, barren land, urban and built-up land.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.113-127
• /
• 2015

Recently, there has been a growing interest in UAS(Unmanned Aerial System), and it is required to develop techniques to effectively detect water body from the recorded images in order to implement flood monitoring using UAS. This study used a UAS with RGB and NIR+RG bands to achieve images, and applied supervised classification method to evaluate the accuracy of water body detection. Firstly, the result for accuracy in water body image classification by RGB images showed high Kappa coefficients of 0.791 and 0.783 for the artificial neural network and minimum distance method respectively, and the maximum likelihood method showed the lowest, 0.561. Moreover, in the evaluation of accuracy in water body image classification by NIR+RG images, the magalanobis and minimum distance method showed high values of 0.869 and 0.830 respectively, and in the artificial neural network method, it was very low as 0.779. Especially, RGB band revealed errors to classify trees or grasslands of Songsan amusement park as water body, but NIR+RG presented noticeable improvement in this matter. Therefore, it was concluded that images with NIR+RG band, compared those with RGB band, are more effective for detection of water body when the mahalanobis and minimum distance method were applied.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.5-15
• /
• 2001

For estimating paddy field area with Landsat TM images, two dates, May 31, 1991 (transplanting stage) and August 19, 1991 (heading stage) were selected by the data analysis of digital numbers considering rice cropping calendar. Four different estimating methods (1) rule-based classification method, (2) supervised classification(maximum likelihood), (3) unsupervised classification (ISODATA, No. of class:15), (4) unsupervised classification (ISODATA, No. of class:20) were examined. Paddy field area was estimated to 7291.19 ha by non-classification method. In comparison with topographical map (1:25,000), accuracy far paddy field area was 92%. A new image stacked by 10 layers, Landsat TM band 3,4,5, RVI, and wetness in May 31,1991 and August 19,1991 was made to estimate paddy field area by both supervised and unsupervised classification method. Paddy field was classified to 9100.98 ha by supervised classification. Error matrix showed 97.2% overall accuracy far training samples. Accuracy compared with topographical map was 95%. Unsupervised classifications by ISODATA using principal axis. Paddy field area by two different classification number of criteria were 6663.60 ha and 5704.56 ha and accuracy compared with topographical map was 87% and 82%. Irrespective of the estimating methods, paddy fields were discriminated very well by using two-date Landsat TM images in May 31,1991 (transplanting stage) and August 19,1991 (heading stage). Among estimation methods, rule-based classification method was the easiest to analyze and fast to process.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.489-508
• /
• 2018

As climate changes, it is necessary to predict changes in the habitat environment in order to establish more aggressive adaptation strategies. The bioclimatic classification which clusters of areas with similar habitats can provide a useful ecosystem management framework. Therefore, in this study, biological habitat environment of Northeast Asia was identified through the establishment of the bioclimatic zones, and the impac of climate change on the biological habitat was analyzed. An ISODATA clustering was used to classify Northeast Asia (NEA)into 15 bioclimatic zones, and climate change impacts were predicted by projecting the future spatial distribution of bioclimatic zones based upon an ensemble of 17 GCMs across RCP4.5 and 8.5 scenarios for 2050s, and 2070s. Results demonstrated that significant changes in bioclimatic conditions can be expected throughout the NEA by 2050s and 2070s. The overall zones moved upward, and some zones were predicted to be greatly expanded or shrunk where we suggested as regions requiring intensive management. This analysis provides the basis for understanding potential impacts of climate change on biodiversity and ecosystem. Also, this could be used more effectively to support decision making on climate change adaptation.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.179-193
• /
• 2021

This study examines the use of satellite images for river classification and determination of stream reach, which is the first priority in the river environment assessment system. In the river environment assessment system used in South Korea, it is proposed to set a stream reach by using 10 or 25 times the width of the river based on the result of river classification. First, river classification for the main stream section of Cheongmi stream was performed using various river-related data. The maximum likelihood method was applied for land cover classification. In this study, Sentinel-2 satellite imagery, which is an open data technology with a resolution of 10 m, was used. A total of four satellite images from 2018 was used to consider various flow conditions: February 2 (daily discharge = 2.39 m³/s), May 23 (daily discharge = 15.51 m³/s), June 2 (daily discharge = 3.88 m³/s), and July 7 (daily discharge = 33.61 m³/s). The river widths were estimated from the result of land cover classification to determine stream reach. The results of the assessment reach classification were evaluated using indicators of stream physical environments, including pool diversity, channel sinuosity, and river crossing shape and structure. It is concluded that appropriate flow conditions need to be considered when using satellite images to set up assessment segments for the river environment assessment system.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.281-289
• /
• 2000

While acquiring images, the relative motion between the imaging device and the object scene seriously damages the image quality. This phenomenon is called motion blur. The peak-trace approach, which is our recent previous work, identifies important parameters to characterize the point spread function (PSF) of the blur, given only the blurred image itself. With the peak-trace approach the direction of the motion blur can be extracted regardless of the noise corruption and does not need much Processing time. In this paper stochastic peak-trace approaches are introduced. The erroneous data can be selected through the ML classification, and can be made small through weighting. Therefore the distortion of the direction in the low frequency region can be prevented. Using the linear prediction method, the irregular data are prohibited from being selected as the peak point. The detection of the second peak using the proposed moving average least mean (MALM) method is used in the Identification of the motion extent. The MALM method itself includes a noise removal process, so it is possible to extract the parameters even an environment of heavy noise. In the experiment, we could efficiently restore the degraded image using the information obtained by the proposed algorithm.

• The Korean Journal of Applied Statistics
• /
• v.21 no.4
• /
• pp.571-580
• /
• 2008

The logistic regression analysis is widely used in the area of customer relationship management and credit risk management. It is well known that the maximum likelihood estimation is not appropriate when multicollinearity exists among the regressors. Thus we propose the logistic principal components regression to deal with the multicollinearity problem. In particular, new method is suggested to select proper principal components. The selection method is based on the condition index instead of the eigenvalue. When a condition index is larger than the upper limit of cutoff value, principal component corresponding to the index is removed from the estimation. And hypothesis test is sequentially employed to eliminate the principal component when a condition index is between the upper limit and the lower limit. The limits are obtained by a linear model which is constructed on the basis of the conjoint analysis. The proposed method is evaluated by means of the variance of the estimates and the correct classification rate. The results indicate that the proposed method is superior to the existing method in terms of efficiency and goodness of fit.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.95-100
• /
• 2016

Background: Survival time of lymphoma patients can be estimated with the help of microarray technology. In this study, with the use of iterative Bayesian Model Averaging (BMA) method, survival time of Mantle Cell Lymphoma patients (MCL) was estimated and in reference to the findings, patients were divided into two high-risk and low-risk groups. Materials and Methods: In this study, gene expression data of MCL patients were used in order to select a subset of genes for survival analysis with microarray data, using the iterative BMA method. To evaluate the performance of the method, patients were divided into high-risk and low-risk based on their scores. Performance prediction was investigated using the log-rank test. The bioconductor package "iterativeBMAsurv" was applied with R statistical software for classification and survival analysis. Results: In this study, 25 genes associated with survival for MCL patients were identified across 132 selected models. The maximum likelihood estimate coefficients of the selected genes and the posterior probabilities of the selected models were obtained from training data. Using this method, patients could be separated into high-risk and low-risk groups with high significance (p<0.001). Conclusions: The iterative BMA algorithm has high precision and ability for survival analysis. This method is capable of identifying a few predictive variables associated with survival, among many variables in a set of microarray data. Therefore, it can be used as a low-cost diagnostic tool in clinical research.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.426-429
• /
• 2007

One of the widely used applications of remote sensing studies is environmental change detection and biodiversity conservation. The study area Hustai Mountain is situated in the transition zone between the Siberian taiga forest and Central Mongolian arid steppe. Hustai National Park carries out one of several reintroduction programs of takhi (wild horse or Equus ferus przewalskii) from various zoos in the world and it represents one of a few textbook examples of successful reintroduction of an animal extinct in the wild. In this paper we describe the results of an analysis on the change of remaining forest area over the 7-year period since Hustai Mountain was designated as a protected area for reintroduction to wild horses. Today the forested area covers approximately 5% of the Hustai National Park, mostly the north-facing slopes above 1400 m altitude. Birch (Betula platyphylla) and aspen (Populus tremula) trees are predominant in the forest. We used Landsat ETM+ images from two different years and multi temporal MODIS NDVI data. Land types were determined by supervised classification methods (Maximum Likelihood algorithm) verified with ground-truthing data and the Land Change Modeler (LCM) which was developed by Clark Labs. Forested area was classified into three different land types, namely the forest land, mountain meadow and mountain steppe. The study results illustrate that the remaining birch forest has rapidly changed to fragmented forest land and to open areas. Underlying causes for such a rapid change during the 15-year period may be manifold. However, the responsible factors appear to be the drying off and outbreak of forest pest species (such as gypsy moth or Lymantria dispar) in the area.