• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.2 s.308
• /
• pp.1-11
• /
• 2006

In this paper, we propose a new register file architecture called the Register File Extension for Multi-words or Long-word Operation (RFEMLO) to accelerate both symmetric and asymmetric cryptographic algorithms. Based on the idea that most of cryptographic algorithms heavily use multi-words or long-word operations, RFEMLO allows multiple contiguous registers to be specified as a single operand. Thus, a single instruction can specify a SIMD-style multi-word operation or a long-word operation. RFEMLO can be applied to general purpose processors by adding instruction set for multi-words or long-word operands and functional units for additional instruction set. To evaluate the performance of RFEMLO, we use Simplescalar/ARM 3.0 (with gcc 2.95.2) and run detailed simulations on various symmetric and asymmetric cryptographic algorithms. By applying RFEMLO, we could get maximum 62% and 70% reductions in the total instruction count of symmetric and asymmetric cryptographic algorithms respectively. Also, performance results show that a speedup of 1.4 to 2.6 can be obtained in symmetric cryptographic algorithms and a speedup of 2.5 to 3.3 can be obtained for asymmetric cryptographic algorithms when we apply RFEMLO to a processor with an in-order pipeline. We also found that RFEMLO can effectively improve the performance of these cryptographic algorithms with much less cost compared to issue-width increase available in Superscalar implementations. Moreover, the RFEMLO can also be applied to Superscalar processor, leading to additional 83% and 138% performance gain in symmetric and asymmetric cryptographic algorithms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.630-643
• /
• 2001

In this paper, the performance of a Multi-Carrier DS-CDMA system with Hybrid $SC/MRC- L_{c}/L$ diversity in the multipath Rayleigh fading environment is analyzed and compared with that of a Wideband DS-CDMA system. Each carriers of the number of the input diversity branches in the Multi-Carrier DS-CDMA system is L and among L, the branches of $L_c$ are chosen to be maximum-ratio-combined. And the diversity outputs are coherent-detected and despread by the correlator of each carrier. As the result, we have known that the structure of the Wideband DS-CDMA system with Hybrid $SC/MRC-L_{c}/L$ diversity reception becomes simple due to no synchronization of bit or phase and in terms of the error performance, the performance of Hybrid $SC/MRC- L_{c}/L$ diversity is better than that of selection diversity, but worse than that of MRC diversity. Moreover, the performance of a Multi-Carrier DS-CDMA system is better than that of a Wideband DS-CDMA system in multipath Rayleigh fading channel since Hybrid $SC/MRC- L_c/L$ diversity can obtain gain from each diversity branch. In case four carriers are used and required BER is $10^{-6}$ in wireless data communication, Hybrid SC/MRC-2/4 diversity can increase more 17 users than Hybrid SC/MRC-2/3 diversity because the better input branches can be selected through increase of input branches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1039-1046
• /
• 2007

In this paper, a coupled-defected ground structure(C-DGS) using negative inductive coupling is proposed and a bandstop filter(BSF) using C-DGS is designed and fabricated. The proposed C-DGS is the closely-located DGS cells for the negative coupling, the negative coupling of ground currents between adjacent DGS cells greatly improves the stopband characteristics. The proposed BSF utilizing the sharp cutoff response of the C-DGS has a -10 dB rejection band from 4 GHz to 11.3 GHz. A maximum attenuation rate is -64.3 dB/GHz in 3 cell structure, -108 dB/GHz in 5 cell structure. The C-DGS BSF shows the improved attenuation rate 3.8 times in 3 cell structure, 2.4 times in 5 cell structure, Also, the C-DGS BSF is reduced to 35.2 % and 40 % of the DGS BSF, respectively, due to the closely-located DGS cells. We fabricated the single gate mixer using C-DGS BSF. The single gate mixer has 6.6 dB conversion gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.634-639
• /
• 2006

In this paper an MMIC 2-stage power amplifier is designed and fabricated for 5GHz wireless LAN applications using $0.5{\mu}m$ gate length PHEMT transistors. The PHEMT gate width is optimized in order to meet the linearity and efficiency of the MMIC power amplifier. The $0.5{\mu}m\times600{\mu}m$ PHEMT for the drive stage and $0.5{\mu}m\times3000{\mu}m$ PHEMT for the amplification stage are the optimized sizes to achieve more than 25dBc of third order IMD at the power level of 3dB back-off from the input P1dB and more than 22dBm output power under a supply voltage of 3.3V. The two-stage MMIC power amplifier is designed to be used for the both of HIPERLAN/2 and IEEE 802.11a because of its broadband characteristics. The fabricated PHEMT MMIC power amplifier exhibits a 20.1dB linear power gain, a maximum 22dBm output power, a 24% power added efficiency under 3.3V supply voltage. The input and output on-chip matching circuits are included on a chip of $1400\times1200{\mu}m^2$.

• The Journal of Fisheries Business Administration
• /
• v.29 no.1
• /
• pp.121-137
• /
• 1998

This study was conducted to examine the economic evaluation of the newly developed fish meal analog (BAIFA-M) in Korean rockfish feed. A raw fish feed (MP) and two commercially formulated diets (EP) were employed to compare weight gain (WG), feed conversion ratio (FCR) and survival rate (SR) from the sea cage culture system. By using the economic model in the practical sea cage culture system, feed cost, production cost and gross profit per kg production, rate of profit to gross revenue (RPGR), and internal rate of return (IRR) were calculated based upon the results of the experiment and the information of the private aquaculture farm (Young Chang) in Tong young, Korean. IRR criteria is one of the popular economic feasibility analysis methods applicable far aquaculture industry. This is an economic evaluation method to compare the given interest rate or the discount rate with IRR which can be calculated by the difference between the present value of the benefit stream and of the cost stream. The benefits of using EP on WG, FCR, SR, and production cost will be emphasized in this study. Fish averaging 20$\pm$3.6g (Mean$\pm$SD) were randomly distributed in each small cage (6m$\times$6m) as groups of 2,000 fish. By using 3 large size cages (12m$\times$12m), 12 small cages were constructed, and only 9 small cages were employed for three replicates of each diet treatment. To compare with MP diet, two sinking EP diets were designed by our laboratory and produced by the local feed company who wanted to promote these EP diets for the mass cage culture of Korean rockfish in the future. Two EP diets contain white fish meal and/or BAIFA-M as the main animal protein sources : WFM diet, maximum 43% of white fish meal : BAIEA- M diet, 30% of white fish meal nab replaced by BAIFA- M from WFM diet. Results are summarized in Table 1. Fish fed MP diet showed significantly lower SR than does fish fed two EP diets(P<0.05). However, there Were no significant difference on FCR among fish fed three practical diets. Table 1. Average feed conversion ratio (FCR), accumulative average survival rate (SR) and economic evaluation data far three practical diets. As we expected, BAIFA-M diet is more economical than WFM diet as well as MP diet. Feed cost and production cost per kg production from BAIEA - M diet were lower than those from WFM and MP diets. Moreover, gross profit per Kg production, RPGR and IRR from BAIFA- M diet were higher than those from WFM and MP diets. This economic evaluation study clearly indicated that MP diet should be replaced by the commerical formulated EP diets as soon as possible in the near future because MP diet is not economical in the practical sea cage culture system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.25-33
• /
• 2003

We derive the outage probabilities for the Erlang capacity and link margin based on handoffs in the reverse link of a CDMA system of 14.4 kbps/1.9 GHz band, calculate them with the same parameters, and then with the maximum realizable Erlang capacity analyze newly the cell coverage in different areas by the COST-231 model If it decreases from 5 % to 2 % in case of $E_b/N_0$=5 dB under a soft handoff, the result shows a very reliable link with additional increment of 0.88 dB in the margin and a high quality of service within the coverage decrease of 0.12 km, 0.25 km, and 1 km in a city, suburban, and open areas respectively on the decrease of 2 Erlang in the capacity. When the $E_b/N_0$ decreases from 7 dB to 5 dB within the outage probability of 5 %, it shows the increase of 9 Erlang and of 0.2 km in a city on the same margin of 2.8 dB. Then, comparing it with a single cell, it shows the decrease of more than 10 Erlang in the capacity, but the enlargement of 0.17 km, 0.3 km, and 1 km in them on the margin decrease of 1.31 dB, also, with a hard handoff, the soft handoff gain of the increase of 10 Erlang and of 0.22 km, 0.5 km, and 2 km on the decrease of 2.16 dB.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2017

In this paper, we designed and fabricated the multi band Transceiver Assembly(TCA) for the Multi Channel Synthetic Aperture Radar(MCSAR) containing C-band, X-band, Ku-band and we researched to verify electrical performance of TCA. The transceiver consists of transmitters, receivers, signal selection modules for each band, and stability oscillator, frequency synthesizer, controller, power distributor. The transceiver has a receive path selection and bandwidth selection functions in accordance with the operating mode. And the transceiver can transmit and receive all three bands simultaneously, each band has a bandwidth of up to 300 MHz. Final transmission output of transceiver for each band is over 20 dBm to be suitable for driving the T/R module. Receiver bandwidth is selected according to the required function and receiver gain has approximately C-band 52 dB, X-band 50 dB, Ku-band 60 dB, the maximum noise figure of Ku-band V polarization is 4.28 dB in the whole band H, V polarization. As a result of the electrical performance test, a multi-band TCA is satisfied the property requirements of the MCSAR.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.111-116
• /
• 1998

Thirteen InGaAs/InGaAsP separate-confinement heterostructure multiple quantum well lasers were designed such that the strain in the active layer from 0.9% compressive strain to 1.4% tensile, and their threshold current density was caluculated to see the effects of strain on the threshold current density. The well width was adjusted such that the bandgap of the quantum well is 1.55 ${\mu}{\textrm}{m}$, For the calculation of the band structure and transition matrix element needed for the gain calculation, a block diagonalized 8$\times$8 second-order $\to{k}.\to{p}$ Hamiltonian was used to incorporate the conduction band nonparabolicity and the valence band mixing. The threshold current density shows discontinuity at 0.4% tensile strain where the first heavy-hole subband and the first light-hole subband cross and at 0.5% tensile strain where the second conduction subband begins to exist. The threshold current density at room temperature has a maximum around these 0.4-0.5% tensile strains, and as strain varies in either direction it decreases first and then increases a little after a local minimum. This calculated trend is consistent with the other reported experimental results. We discussed the results of this calculation in comparison with other theoretical or experimental papers on the effect of strain.