• 제목/요약/키워드: maximum dry unit weight

검색결과 75건 처리시간 0.025초

유기담체인 Peat 및 Rock wool을 사용한 바이오필터에 의한 황화수소(H2S)의 제거특성 (Characteristics of Hydrogen-sulfide(H2S) removal by a Biofilter with Organic Materials, Peat and Rock wool)

  • 김남진
    • 유기물자원화
    • /
    • 제9권3호
    • /
    • pp.136-144
    • /
    • 2001
  • 악취중 황화수소의 생물학적 제거시스템에서 바이오필터의 미생물 담체로 유기담체인 Peat와 Rock wool을 사용하고 미생물원으로 소화 슬러지를 식종했다. 유입 황화수소 농도를 증가시켜 완전히 제거되는 황화수소의 유입 부하를 완전 제거능, 제거를 보여준 최대의 제거량을 최대 제거능으로 정의하였다. 단위 중량 및 단위 체적 기준으로 비교한 완전 제거능 및 최대 제거능은 Peat보다 Rock wool의 결과가 높았다. 동력학적 반응속도 해석에 의한 황화수소의 최대 제거속도($V_m$) 및 포화정수($K_s$)를 이용한 속도해석 결과는 황화수소의 농도가 증가할수록 Rock wool의 반응속도가 빠르게 진전되었다.

  • PDF

인산석고-EPS 조각을 활용한 경량혼합토의 공학적 특성 (Engineering Characteristics of the Light Weight Soil Using Phosphogypsum and EPS Beads)

  • 김영상;서동은;김원봉;이우범
    • 한국지반환경공학회 논문집
    • /
    • 제10권6호
    • /
    • pp.19-25
    • /
    • 2009
  • 본 연구에서는 산업부산물인 인산석고와 EPS 조각을 기존의 성토용 토사에 혼합하여 지반응력을 감소시킴으로써 고함수비로 준설매립된 공유수면 내 초연약지반의 침하, 활동파괴, 측방유동 등의 문제를 해결할 수 있는 경량혼합토를 개발하였다. 개발된 경량혼합토는 공유수면 매립지역에서 대량이용이 가능한 도로 및 교대의 성토재료, 각종 뒤채움재로의 사용에 대한 적용성을 평가하기 위하여 기본물성시험, 다짐시험, CBR시험, 전단강도시험 등 일련의 실내시험을 수행하였고 지반공학적 특성을 검토하였다. 시험결과, 경량혼합토의 최대건조단위중량은 $14.32{\sim}15.79kN/m^3$, 최적함수비는 21.91~24.23%로 일반 화강풍화토와 비교할 때 9.4~19.3%의 하중감소 효과가 있으며, 수정 CBR값은 10.4~18.4%로 국내 도로노상 및 뒤채움재에 대한 규정을 만족하는 것으로 나타났다. 또한 전단강도정수는 점착력 10.79~18.64kPa, 내부마찰각 $35.4{\sim}37.2^{\circ}$로 각각 나타나 국내에서 일반적으로 사용되는 성토재료 및 뒤채움재 범위를 충족시키는 것으로 평가되어 실제 성토재료 및 뒤채움재로 연약지반에서 효과적으로 활용이 가능할 것으로 판단되었다. 본 연구를 통하여 개발된 인산석고 경량혼합토는 하중감소 효과가 있으면서도 전단강도와 지지력면에서 큰 문제가 없어서 연약한 임해매립지반의 도로 노상토 및 뒤채움재로 사용될 수 있어 인산석고의 대량 재활용방안이 될 것으로 판단된다.

  • PDF

고화제로 안정처리 된 울산지역 노상재료의 강도 및 다짐특성 - 주 성분이 CaO와 SO3인 고화제 - (Strength and Compaction Characteristics of Binder-Stabilized Subgrade Material in Ulsan Area - Main Binder Components : CaO and SO3 -)

  • 한상현;여규권;김홍연
    • 한국지반공학회논문집
    • /
    • 제34권12호
    • /
    • pp.105-113
    • /
    • 2018
  • 본 연구에서는 고화제를 이용하여 개량된 노상재료의 배합에 따른 공학적 특성과 지지력을 분석하기 위하여 실내 및 현장시험을 실시하였다. 노상토 개량에 고화제로 사용된 재료의 주성분은 CaO와 $SO_3$이다. 고화제를 현장 토공재료인 저소성 점토(CL)와 혼합한 후 입도분포는 체 굵기가 커질수록 상대적으로 통과율이 낮아져 실트질 모래(SM)로 흙의 종류가 바뀌었을 뿐 아니라 소성지수와 수정 CBR 등의 공학적 특성이 노상토에 적합하게 개선되었다. 동일한 에너지로 다짐된 개량토의 다짐곡선으로부터 최대건조단위중량은 현장토 대비 약 6%가량 증가하고 최적함수비는 약간 감소하여 상당히 입도가 개선되었다. 실내 CBR 시험에서도 동일한 다짐에너지에서 적당량의 고화제를 투입한 개량토의 단위중량과 강도 증대효과가 현저히 크게 나타났다. 고화제 투입 후 조립분의 비율이 상대적으로 증가함으로 인하여 현장토 대비 초기다짐 시 팽창비가 3.3배 이상 감소되었고, 최종다짐 시에는 6.5배 이상 작게 나타났다. 시험시공이 이루어진 구간에서 일축압축강도는 설계강도 이상을 확보하면서 균질한 값을 유지하였다. 동일한 시공조건으로 현장에 적용한 후 확인시험 결과에서도 다짐 1일 후 시험한 6개소 모두의 지지력계수가 적절한 수준에서 목표값을 상회하고 그 변동성도 양호한 것으로 나타났다.

벼 건답휴립직파재배에서 파종기에 따른 생육 및 수량 (Performance of direct-Seeded Rice at Different Seeding Dates)

  • 이석순;백준호;김순철
    • 한국작물학회지
    • /
    • 제36권2호
    • /
    • pp.154-159
    • /
    • 1991
  • 남부지방에서 벼 건답직파재배의 가능성과 파종시기에 다른 출아, 출수생태 및 수량성을 분석하기 위하여 동해벼를 1989년 5월 10일부터 6월 20일까지 10일 간격으로 파종하여 얻은 결과를 요약하면 다음과 같다 1. 파종에서 출아까지 소요일수는 5월 10일 파종의 13일부터 6월 10일 파종의 7일 까지 파종기가 늦어질수록 감소하였으나 입묘율은 차이가 없었다. 그러나 6월 20일 파종에서는 파종후 10일 간의 223mm의 강우로 발아가 지연되고 입묘수도 다른 파종기에서 보다 낮았다. 2. 초장은 파종기가 늦어질수록 단축되는 경향이었는데 6월 20일 파종에서는 초장이 더욱 작았다. 촤고분얼수는 $m^2$당 700-800개로 유효경비율은 40-45% 이었다. 3. 출수는 파종기가 늦어질수록 지연되었다. 파종에서 출수까지의 소요일수는 5월 10일 파종의 97일부터 6월 20일 파종의 71일까지 직선적으로 감소되었으나 유효적산온도(일평균기온 -15$^{\circ}C$)로 보면 약 87$0^{\circ}C$로써 (변이계수 2.3%) 파종기에 관계없이 일정한 값을 보였다. 4. 수장과 수당영화수는 파종기가 늦어질수록 감소되었다. 단위면적당 영화수와 백미수량은 6월 20일 파종기에서 다른 파종기에서 보다 낮았다. 임실율과 등숙율은 모든 파종기간에 차이가 없었고, 현미 천립중은 6월 20일 파종기가 다른 파종기에서 보다 무거웠다.

  • PDF

Flat TDR 시스템을 이용한 지반의 물리적 특성 및 전단파속도 예측 (Prediction of Physical Properties and Shear Wave Velocity of the Ground Using the Flat TDR System)

  • 정찬욱;김대현
    • 지질공학
    • /
    • 제32권1호
    • /
    • pp.173-191
    • /
    • 2022
  • 본 연구에서는 Flat TDR을 이용하여 지반의 전단파속도를 측정하였고 측정값의 정밀도 분석 및 현장적용성에 대한 검증을 수행하였다. Flat TDR 내 결합되어 있는 Piezo-stack을 이용하여 현장에서의 전단파속도 측정값을 도출하였고, 도출한 값의 검증을 위해서 들밀도시험, 동적콘관입시험(DCPT), 문헌조사 등을 적용하여 비교·분석하였다. 실험결과 그라우트재 주입시 재령 초기 전단파속도 변화의 평균값은 10.15 m/s이며, 7~14일차 이후의 전단파속도 변화의 평균값은 65.99 m/s로 재령일 증가하는 경향을 보였다. 또한 OMC를 기준으로 건조 측에서는 함수비가 증가할수록 건조밀도와 전단파속도가 증가하고, 습윤 측에서는 함수비가 증가할수록 건조밀도와 전단파속도가 감소하는 것을 알 수 있었다. 현장시험 결과 도출된 전단탄성계수 값이 최소 17.36 MPa에서 최대 28.13 MPa로 확인되어 참고문헌 값과 유사한 측정값을 확인하였다. 이를 통해 Flat TDR을 이용한 전단탄성계수의 측정값이 신뢰성이 있는 데이터임을 알 수 있고, 추후 현장 지반의 다짐관리를 효과적으로 할 수 있음을 판단할 수 있다.

The Nutritive Value of Mulberry Leaves (Morus alba) and Partial Replacement of Cotton Seed in Rations on the Performance of Growing Vietnamese Cattle

  • Vu, Chi Cuong;Verstegen, M.W.A.;Hendriks, W.H.;Pham, K.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권9호
    • /
    • pp.1233-1242
    • /
    • 2011
  • The in vivo digestibility of mulberry leaves (Morus alba) and the effects of the partial replacement of cotton seed with fresh mulberry leaf in rations on the performance of growing Vietnamese cattle was investigated. For the in vivo digestibility trial, twenty castrated rams of Phanrang breed (a local prolific breed) with an initial weight of 23-25 kg, were first assigned to four groups according to weight and then randomly assigned to one of four dietary treatments to determine digestibility of nutrients in mulberry leaves (M. alba), natural Bermuda grass (Cynodon dactylon), elephant grass (Pennisetum purpureum) and buffalo grass (Panicum maximum cv. TD 58). All forages were cut and chopped daily before being offered (at 120% maintenance) to the sheep. In the feeding trial, 20 Laisind (Vietnam yellow cows${\times}$Red Sindhy bulls) crossbred bulls averaged 18 month old and 184 kg were used to investigate the effect of partial replacement of cottonseed in the diet by mulberry leaves on live weight gain and feed conversion rate. The experiment was a randomized complete block design with four levels of fresh mulberry leaves which varied from 0 to 15% of total dietary dry mater and five animals per treatment over an 84 day period. The in vivo digestion trial showed the superior quality of mulberry leaves compared with the grasses. Chemical analysis indicated that mulberry leaves had the highest CP and the lowest NDF contents (22.3 and 31.1% DM, respectively) among the four forages tested. Digestibility of DM and OM of the mulberry leaf (66.4 and 71.8%, respectively) was also the highest but that of CP (58.2%) and NDF (58.4%) was the lowest of the four forages evaluated (p<0.05). Consequently, the ME value and therefore net energy (NE) and unit feed for lactation (UFL) values of the mulberry leaves, which was estimated from chemical composition and digestibility values, were the highest among the forages investigated in the present study. Results of the feeding trial showed no treatment effect on average daily gain (ADG) of the cattle. The values were 554, 583, 565 and 568 g/d for animals in the diets of 0, 5, 10, and 15% mulberry leaves inclusion, respectively. Total DM intake of the animal was not affected by the treatment when expressed as kg/animal/d. However, when adjusted for metabolic weight of the animal the DM intake was reduced (p<0.05) as whole cottonseed was replaced by mulberry leaves in the ration. When the level of mulberry leaves in the ration increased from 5 to 15% of dietary DM at the expense of whole cottonseed, CP and ME intakes of the cattle were significantly decreased (p<0.05) and the feed to gain ratio reduced by 8 to 14% as compared with the control diet (p<0.05). Mulberry leaf is a good feed ingredient for ruminants because of its high level of crude protein and high digestibility of nutrients and energy. Mulberry leaves can be efficiently used as a source of protein supplement to replace cottonseed, a more expensive animal feeds ingredient, in the diet for Vietnamese cattle.

산업폐기물 제지회의 지반공학적 특성 및 활용가능성 (Geotechnical Characteristics and Utilization Method for Paper Ash of Industrial Waste)

  • 이처근;안광국;김민호;허열
    • 한국지반환경공학회 논문집
    • /
    • 제1권1호
    • /
    • pp.19-26
    • /
    • 2000
  • 본 연구에서는 일련의 실내시험을 통하여 제지회의 기본특성, 다짐, 압축강도, 압밀, 투수 및 CBR 특성을 분석하여 폐기물 매립장의 차수재와 복토재 등의 건설재료로서 제지회의 활용가능성을 연구하였다. 본 연구에서 제지회는 청주근교 4개의 제지공장에서 채취된 시료를 사용하였으며, 제지회의 투수특성을 확보하기 위하여 혼합재로서 벤토나이트와 소석회를 사용하였다. 시험결과, 벤토나이트와 소석회의 혼합비가 증가함에 따라 최대건조단위중량은 증가하였으며, 일축압축시험결과 제지회는 복토재의 일축압축강도 기준을 만족하고 있는 것으로 나타났다. 또한, 벤토나이트의 혼합비가 증가할수록 투수계수는 감소하였으며, 차수재로 사용 가능한 투수계수가 $1{\times}10^{-7}cm/sec$ 이하로 되는 벤토나이트의 혼합비는 30%로 평가되었다.

  • PDF

관거의 기초 및 뒷채움재로 활용하기 위한 석분의 공학적 특성 (Engineering Characteristics of Crushed Rock for Foundation and Backfill Materials of a Conduit)

  • 문홍득;김대만
    • 한국지반환경공학회 논문집
    • /
    • 제7권6호
    • /
    • pp.67-73
    • /
    • 2006
  • 본 연구에서는 하수관거의 기초나 뒷채움재로 많이 사용되고 있는 기존의 모래를 대체할 재료로써 석분의 적용가능성을 평가하기 위하여 석분재료에 대한 기본적인 물리적, 역학적인 특성실험을 실시하였다. 석분의 입도분포는 모래보다 더 좋은 상태를 나타내며, 다짐실험 결과도 모래보다 강도특성이 좋은 것으로 나타났다. 이러한 실험결과로부터 하수관거의 기초 및 뒷채움재로써 석분은 현장적용성이 우수한 것으로 평가되며, 이를 뒷받침하기 위하여 직접전단시험, 삼축압축시험을 실시하여 강도특성을 분석한 결과 모래의 경우와 유사한 경향을 나타내었다. 석분의 경우 일축압축강도 특성은 시간이 지남에 따라 점차 증가하는 경향을 보이지만 6~7일 경과 후에는 거의 일정한 값을 보이는 것을 알 수 있었다. 이와 같은 실험결과로부터 석분도 하수관거의 기초 및 뒷채움재로 충분히 활용할 수 있는 재료로 평가되었다.

  • PDF

도시폐기물의 강도특성 향상을 위한 현탁액 주입의 응용 (Application of Particulate Grouts for Improving Strength Characteristics of Municipal Wastes)

  • 천병식;박홍규;장연수
    • 한국지반공학회지:지반
    • /
    • 제13권1호
    • /
    • pp.59-74
    • /
    • 1997
  • 본 논문에는 사용종료된 쓰레기 매립장의 건설부지로의 개발가능성을 알아 보기 위하여 지반 조사와 침하해석을 수행한 결과를 나타내었다. 쓰레기 폐기물의 침하특성을 저감하고 강도특성을 향상하기 위하여 생석회와 시멘트 계통 그라우트재를 혼합 그 특성변화를 분석하였으며 대상 약액으로는 생석회, 보통시멘트, 슬래그시멘트, Geocrete시멘트의 4종류가 사용되었다. 현장지반조사 결과 쓰레기의 매립기간이 짧아 유기질 함량이 큰 쓰레기가 매립기간이 긴 쓰레기에 비교하여 최적함수비는 크고 최대건조밀도가 작은 것으로 나타났다. 매립쓰레기의 두께가 지점별로 큰 차이를 보였으며 침하량 분석 결과 위치에 따른 침하량의 차이가 크게 나타났다. 고결공법의 적용성을 검토한 결과 쓰레기 강도의 향상정도는 Geocrete시멘트, 슬래그시멘트, 보통 포틀랜드시멘트, 생석회의 순으로 우수한 것으로 나타났다.

  • PDF

Investigation of Strength Characteristics of Ferrous Slag and Waste Concrete in Water Contacting Environment by Exposure to Raining Events

  • Kim, Byung-Gon;Shin, Hyunjin;Lee, Seunghak;Park, Junboum
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제21권2호
    • /
    • pp.1-7
    • /
    • 2016
  • Ferrous slag is a by-product from steel making process and waste concrete is generated from construction activities. Large part of ferrous slag and waste concrete are recycled as construction materials. However, Ca2+ leaching out of ferrous slag and waste concrete in the water-contacting environment can cause a strength change. Strength can be reduced due to the dissolution of solid form of CaO which is one of the main contents of ferrous slag and waste concrete. On the other hand, strength can be enhanced due to the pozzolanic reaction of cementitious components with water. In this study, steelmaking slag, blast furnace slag, and waste concrete were aged by exposure to raining events, and the change of their compaction and shear strength characteristics was investigated. Optimum moisture content of all materials used in this study increased with aging period while maximum dry unit weight slightly decreased, implying that the relative contents of fine particles increased as the CaO solid particles were dissolved. Internal friction angle and shear strength of recycled materials also increased with aging period, indicating that the materials became denser by the decrease of void ratio attributed to the fine particles generated during the weathering process and the development of cementitious compounds increasing the bonding and interlocking forces between the particles. The results of this study demonstrated that mechanical strength of recycled materials used as construction materials has little chance to be deteriorated during their service life.