• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.1-12
• /
• 2023

In this study, forced vibration behavior of a piezo magneto electric sandwich Timoshenko beam is investigated. It is assumed a sandwich beam with porous core and graphene platelet reinforced composite (GPLRC) in facesheets subjected to magneto-electro-elastic and temperature-dependent material properties. The magneto electro platelets are under linear function along with the thickness that includes a cosine function and magnetic and electric constant potentials. The governing equations of motion are derived using modified strain gradient theory for microstructures. The effects of material length scale parameters, temperature change, different distributions of porous, various patterns of graphene platelets, and the core to face sheets thickness ratio on the natural frequency and excited frequency of a sandwich Timoshenko beam are scrutinized. Various size-dependent methods effects such as MSGT, MCST, and CT on the natural frequency is considered. Moreover, the final results affirm that the increase in porosity coefficient and volume fractions lead to an increase in the amount of natural frequency; while vice versa for the increment in the aspect ratio. From forced vibration analysis, it is understood that by increasing the values of volume fraction and the length thickness of GPL, the maximum deflection of a sandwich beam decreases. Also, it is concluded that increasing the temperature, the thickness of GPL, and the initial force leads to a decrease in the maximum deflection of GPL. It is also shown that resonance phenomenon occurs when the natural and excitation frequencies become equal to each other. Outcomes also reveal that the third natural frequency owns the minimum value of both deflection and frequency ratio and the first natural frequency has the maximum.

• Fisheries and Aquatic Sciences
• /
• 제3권2호
• /
• pp.97-110
• /
• 2000

To investigate characteristics of water masses and current structures around Noto Peninsula located in south-east coastal region of the East Sea, observation results of CREAMS (Circulations Research of the East Asian Marginal Seas) cruise and data report of oceanographic observation (Japan Meteorological Agency) in June, 1995 and 1996 were used. Water mass showing characteristics of Tsushima Warm Current (TWC) exists over the continental shelf. The depth is shallower than 200m and its width and thickness are 190km and 200m, respectively. Minimum level of dissolved oxygen occurred at the layers of maximum salinity. In the current structure, a noteworthy phenomenon is that the positions of the high-salinity water (more than 34.6 psu) match well with the distributions of the southwestward flow. In June of 1995 and June of 1996, a southwestward flow were separated into two parts along line C and line G. Current directions derived from the temperature and salinity match well with the distributions of the geostrophic currents in the vertical sections. The isothermal lines and the isohaline, which exist horizontally along the coastal area of the Japan, change abruptly at the frontal area of the Noto Peninsula, then turn toward the center of the East Sea. The dynamic depth anomalies centering around the region far northwest of the Noto Peninsula were relatively high, compared to those of other regions. The isopycnic surface (sigma-t, 25.8) existed near the surface in the central part of the East Sea, but, at the depth of 100m, the isopycnic surface was found in the coastal waters.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.111-127
• /
• 2020

The goal of this study is to fill this apparent gap in the area about investigating the effect of porosity distributions on vibrational behavior of FG sectorial plates resting on a two-parameter elastic foundation. The response of the elastic medium is formulated by the Winkler/Pasternak model. The internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The model is proposed with material parameters varying in the thickness of plate to achieve graded distributions in both porosity and nanofillers. The elastic modulus of the nanocomposite is obtained by using Halpin-Tsai micromechanics model. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. The 2-D differential quadrature method as an efficient and accurate numerical approach is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution. Results show that for better understanding of mechanical behavior of nanocomposite plates, it is crucial to consider porosities inside the material structure.

• 한국지구과학회지
• /
• 제30권1호
• /
• pp.58-68
• /
• 2009

몬순 기간에 구름의 복사 강제력의 영향을 파악하기 위하여 1998년 4월부터 9월까지 International Satellite Cloud Climatology Project (ISCCP) 구름자료와 GEWEX Asian Monsoon Experiment (GAME) 재분석 자료를 입력 자료로 복사 모델을 수행하여 3차원의 장파 복사 플럭스를 구하였다. 구름에 의한 대기 복사 가열은 구름을 포함한 평균 대기와 맑은 대기에서의 복사 가열율의 차이를 이용하여 계산하였다 구름에 의한 복사 가열율이 아시아 몬순에 미치는 영향을 중점적으로 살펴보았다. 구름에 의한 복사 가열은 인도양에서 최대를 티벳 고원에서 최소를 나타내어, 남북으로 차등 가열의 경도를 나타내었다. 이러한 차등 가열이 대기 순환의 최대 원인임을 고려해볼 때, 인도양과 티벳 고원에서의 구름에 의한 차등 가열의 경도는 해들리 타입의 남북 몬순 순환을 강화시키고 있다. 또한 운정에서의 가열, 운저에서의 냉각의 형태로 나타나는 구름의 복사 가열 분포는, 대기의 불안정성을 높여서 몬순 순환을 증대시킬 수 있는 역할을 하고 있다.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.295-306
• /
• 2020

This paper deals with free vibration analysis of non-uniform column resting on elastic foundations and subjected to follower force at its free end. The internal pores and graphene platelets (GPLs) are distributed in the matrix according to different patterns. The model is proposed with material parameters varying in the thickness of column to achieve graded distributions in both porosity and nanofillers. The elastic modulus of the nanocomposite is obtained by using Halpin-Tsai micromechanics model. The differential quadrature method as an efficient and accurate numerical approach is used to discretize the governing equations and to implement the boundary conditions. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution. Results show that for better understanding of mechanical behavior of nanocomposite column, it is crucial to consider porosities inside the material structure.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.182-188
• /
• 2016

This study investigates cavity flows through a guide grill above a resonator. Vortex distributions and intake flows are simulated for various shapes of the guide grill. The flows are assumed to be compressible, unsteady, and turbulent. Numerical simulations are conducted using a large eddy simulation (LES) model. To analyze the effect of the guide grill shape, three cavity lengths (0.2H, 0.6H, and 1.0H) and cavity angles ($30^{\circ}$, $45^{\circ}$ and $60^{\circ}$) are considered based on resonator height (H). The results show that the vortex generated in the resonator by cavity flow increases with cavity length. Thus, the intake flow is minimum at the smallest cavity length and angle. However, when cavity length is equal to resonator height, the intake flow decreases. The maximum intake flow occurs at a cavity angle $45^{\circ}$ at higher cavity lengths owing to the interaction between the vortex in the resonator and intake flow.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1366-1377
• /
• 2005

Experimental study was carried out in an atmospheric pressure, laboratory-scale dump combustor showing features of combustion instabilities. Flame structure and heat release rates were obtained from OH emission spectroscopy. Qualitative comparisons were made between line-integrated OH chemiluminescence image and Abel-transformed one. Local Rayleigh index distributions were also examined. Mean temperature, normalized standard deviation and temperature fluctuations were measured by coherent anti-Stokes Raman spectroscopy (CARS). To see the periodic behavior of oscillating flames, phase-resolved measurements were performed with respect to the pressure wave in the combustor. Results on system damping and driving characteristics were provided as a function of equivalence ratio. It also could be observed that phase resolved temperatures have been changed in a well-defined manner, while its difference between maximum and minimum reached up to 280K. These results would be expected to play an important role in better understanding of driving mechanisms and thermo-acoustic interactions.

• Wind and Structures
• /
• 제18권6호
• /
• pp.651-668
• /
• 2014

Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.9-12
• /
• 2010

A lamination system using reflow soldering was developed to enhance the mechanical properties of high temperature superconductor (HTS) tape. The laminated coated conductor tape was fabricated using the continuous lamination process. The mean, maximum, and minimum tensile loads in a T-peel test of the laminated coated conductor were 9.9 N, 12.5 N, and 7.6 N, respectively. The critical current ($I_c$) distributions of the non-laminated and laminated coated conductor were compared using anon-contact Hall probe method. The transport $I_c$ nearly matched the non-contact $I_c$; however, some degraded Ic regions were found on the length of 800 cm of laminated coated conductor. We confirmed that the cause of the partially degraded $I_c$ was due to an increase in line tension by (1) solidification induced by a change of composition that usually occurs in molten brass (Cu, Zn) in solder, or (2) non-homogeneity of the thickness of the coated conductor or metal tapes. We suggest that reflow soldering is a promising method for reinforced HTS tape if the controlling solder thickness and lamination guide are modified.

• 대한지하수환경학회지
• /
• 제7권3호
• /
• pp.125-132
• /
• 2000

pH, EC와 TDS는 지하수 수질조사의 기본항목으로서, 지하수 수질의 일차적 평가에 중요한 역할을 한다. 영산강 섬진강 유역에서 1998년도에 조사된 3가지의 수질자료에 의하면 이 지역의 지하수는 대체로 양질의 수질 특성을 나타낸다. 선형회귀분석에 의하면 TDS와 EC는 선형적인 상관성을 갖고 있으나, EC와 pH, TDS와 pH는 상관성이 거의없다. TDS와 EC의 관계는 1.0 mg/1=1.52 $mu\textrm{S}$/cm로서 이 지역의 지하수는 자연수의 수질특성을 나타낸다. 지구통계학적 분석에서 3가지의 수질자료는 정상확률함수의 특성을 보이며, 베리오그램은 모두 지수형모델이 적합한 것으로 나타났다. 수질자료의 등치선도에 의하면 영산강 유역의 지하수 수질이 섬진강 유역에 비하여 약간 더 오염되어 있고, TDS와 EC의 큰 상관성 때문에 2개의 등치선도 유형은 매우 유사하다. 그리고 실제 측정된 3가지 수질의 최소 값과 최대 값은 각각의 등치선도에서 그대로 반영이 되지는 않았는데, 그 이유는 크리깅은 최소의 오차를 갖는 추정치들을 만들어 완만한 분포도를 만들어내는 특성을 갖고 있기 때문이다.