• 제목/요약/키워드: maximum allowable delay bound

검색결과 3건 처리시간 0.017초

네트워크 기반 이산 시간 제어 시스템의 최대 허용 지연 한계 및 실시간 스케줄링 기법에 관한 연구 (Maximum Allowable Delay Bounds and Real-time Scheduling Method of Networked Discrete-time Control Systems)

  • 김동성;최동혁
    • 제어로봇시스템학회논문지
    • /
    • 제12권7호
    • /
    • pp.719-727
    • /
    • 2006
  • This paper proposes a new method to obtain a maximum allowable delay bound for a scheduling of networked discrete control systems and event-based scheduling method. The proposed method is formulated in terms of linear matrix inequalities and can give a much less conservative delay bound than the existing methods. A network scheduling method is presented based on the delay obtained through the proposed method, and it can adjust the sampling period to allocate same utilization to each control loop. The presented method can handle three types of data (sporadic, emergency data, periodic data and non real-time message) and guarantees real-time transmission of periodic and sporadic emergency data using modified EDF scheduling method.

네트워크를 이용한 제어 시스템의 안정도 및 스케줄링에 관한 연구 (Stability and a scheduling method for network-based control systems)

  • 김용호;권욱현;박홍성
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.1432-1435
    • /
    • 1996
  • This paper obtains maximum allowable delay bounds for stability of network-based control systems and presents a network scheduling method which makes the network-induced delay be less than the maximum allowable delay bound. The maximum allowable delay bounds are obtained using the Lyapunov theorem. Using the network scheduling method, the bandwidth of a network can be allocated to each node and the sampling period of each sensor and controller can be determined. The presented method can handle three kinds of data (periodic, real-time asynchronous, and non real-time asynchronous data) and guarantee real-time transmissions of real-time synchronous data and periodic data, and possible transmissions of non real-time asynchronous data. The proposed method is shown to be useful by examples in two types of network protocols such as the token control and the central control.

  • PDF

발파진동 및 발파소음의 측정 및 자료처리 (Measurements and Data Processing for Blast Vibrations and Air-blasts)

  • 최병희;류창하
    • 화약ㆍ발파
    • /
    • 제33권3호
    • /
    • pp.29-50
    • /
    • 2015
  • 측정된 지반진동의 최대입자속도 자료에 대한 통계분석을 통해 환산거리 개념에 기초한 안전발파 설계조건식을 구할 수 있다. 국내에서 널리 사용되는 환산거리에는 자승근 환산거리(SRSD)와 삼승근 환산거리(CRSD)의 두 가지가 있다. 하지만 SRSD와는 대조적으로, CRSD의 장약량 함수는 두 회귀식의 유사한 적합도에도 불구하고 두 함수의 교점을 지나면 기하급수적으로 증가하게 된다. 따라서 CRSD의 지나치게 많은 장약량으로 인해 발생할 지도 모를 구조물의 피해를 방지하기 위해 본 논문에서는 CRSD는 어떤 특정한 거리 이내에서만 사용하도록 제한한다. 한편, 진동의 주파수 스펙트럼에 대한 충분한 고려도 없이 PPV로부터 진동레벨(vibration level; VL)을 예측하거나 환산거리에 따라 VL을 추정하려는 시도들이 있다. 이 시도들은 발파공사 과정에서 소음진동관리법을 충족시키려는 목적으로 이루어지는 것으로 보인다. 소음진동관리법은 생활소음과 생활진동을 주로 취급하고 있다. 그러나 원칙적으로 전체 주파수 스펙트럼 상에서는 속도나 가속도 피크치 사이에는 아무런 상관관계도 존재할 수 없다. 따라서 이러한 상관관계나 추정식의 유도작업은 반드시 동일하거나 매우 유사한 주파수 스펙트럼을 지니는 파동들에 한해서 수행되어야 한다. 끝으로, 구조물의 손상은 PPV 수준과 관련이 있는 것으로 알려져 있으므로 구조물에 대한 지반진동 규제기준에서는 주파수대역별 PPV를 사용하는 것이 바람직하다고 본다.