• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.1008-1014
• /
• 2016

This study was conducted with the purpose of investigating the rheological characteristics of noodle flour dough supplementary konjac powder comprising 0%, 0.5%, 1.0%, 1.5% or 2.0% of the total mixture. In farinograph analysis, water absorption increased with the increased content of konjac powder. Both the arrival times and the development times of the dough with added konjac powder were longer than original wheat flour dough. Dough stability was found to be increased as compared to the control, but decreased as konjac powder content was increased. As konjac powder content increased, the resistance of the dough as shown by farinograph data was highest in the original wheat flour dough as 130 BU. Starting temperature, maximum viscosity temperature and maximum viscosity were decreased as shown in amylograph analysis. In extensograph analysis, the dough's extensibility and resistance to extension of the dough decreased as the amount of konjac powder was increased. The ratio of resistance to extensibility (R/E) decreased with the an increase in the amount of konjac powder included in the dough. The dough's tensile strength after cooking was increased in proportion to the additional amount of konjac powder used.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.929-936
• /
• 1993

Charge transfer complexes of some electron donors with one electron acceptor have been studied to investigate the maximum absorption wavelength and absorbance by UV-Vis spectrometer in three kinds of solvents, such as ethylene chloride, methylene chloride, and chloroform, at the temperature ranges of 16∼25$^{\circ}$C. 1,2,3,4-Tetrahydrocarbazole (THC), 2-methyl, 3-methyl, and 3-ethyl THC were selected as electron donors while chloranil was used as an electron acceptor in this study. It is found that these complexes forms 1 : 1 complexes, and their maximum absorbance and formation constants decreases with respect to the function of the polarity of solvent and temperature. The polarity of solvents and the temperature have been influenced on the formation constants, which were described using the thermodynamic properties. Moreover, the electronic and steric effects of electron donors have also been effects.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.5
• /
• pp.1079-1087
• /
• 2013

The pharmacokinetics of florfenicol (FF) after oral administration was studied in the cultured olive flounder, Paralichthys olivaceus, using high performance liquid chromatography (HPLC). After single administration of FF (20 mg/kg body weight) by oral route in olive flounder ($700{\pm}50$ g, $23{\pm}1.5^{\circ}C$), the concentration in the serum was determined at 1, 5, 10, 15, 24, 30, 50 and 168 h post-dose. The kinetic profile of absorption, distribution and elimination of FF in serum were analyzed fitting to a two-compartment model by WinNonlin program. The area under the concentration-time curve (AUC), maximum concentration ($C_{max}$), time for maximum concentration ($T_{max}$) and elimination time were 22.51 ${\mu}g{\cdot}h/mL$, 0.84 ${\mu}g/mL$, 8.62 h and 447 h, respectively. The results of this study related to dosage and withdrawal times could be used for prescription of FF in field for the treatment of bacterial diseases in olive flounder.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.48-54
• /
• 2014

A unique optical waveguide structure is proposed to enhance the optical characteristics of alcohol screening sensors. This structure is then simulated. The structure consists of two elliptical waveguides that have a common focus to one side and has an IR source and detector at each of the other focal points of the ellipses. When the angle between the two elliptical waveguides is increased from 30 degrees to 90 degrees, the maximum level of irradiance is greatly decreased, falling from $2.23{\times}10^6 W/m^2$ to $5.74{\times}10^5W/m^2$. However, the diameter of the incident rays is at a minimum of 1.86mm and the total incident flux is less than 10% lower when compared to the structure at $90^{\circ}$. It can be seen from the simulation results that this structure might enhance the sensitivity of an optical gas sensor which has a large absorption wavelength.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.381-390
• /
• 1990

The purpose of this study was to evaluate the effects of heat treatment on mechanical properties in $0.016^{{\prime}{\prime}}{\times}0.022^{{\prime}{\prime}}$ blue Elgiloy wires and to measure the amounts of nickel and chromium released from the wires in artificial saliva. Ultimate tensile strength, yield strength and elongation were measured with universal testing machine (Instron). and the amounts of nickel and chromium released from the sample were measured with atomic absorption spectrophotometer after one week immersion in the artificial saliva. Ultimate tensile strength and yield strength were progressively increased below $1000^{\circ}F$, but elongation was decreased. And the results were reversed above $1100^{\circ}F$. After heat treatment of the sample for 9 minutes at $1000^{\circ}F$, the maximum tensile strength and yield strength were $213.6kg/mm^2$, $140.1kg/mm^2$, respectively. Both tensile strength and yield strength were decreased progressively above $1100^{\circ}F$. Elongation was appeared the minimum value (8.6%) after heat treatment for 9 minutes and 12 minutes at $1000^{\circ}F$. There was a pronounced increase in nickel and chromium liberation with increasing time and temperature. The maximum amounts of nickel and chromium released form the sample were $4.947{\mu}m/cm^2$, $3.088{\mu}g/cm^2$, respectively after heat treatment for 12 minutes at $1300^{\circ}F$. Heat treatment is applied to orthodontic wires, especially cobalt-chromium alloys, for the purpose of stress-relievning and hardening. When the heat-treatment of orthodontic wires, the heating procedure should be well controlled in order to have no effect on corrosion resistance and mechanical properties.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.105-110
• /
• 2009

IZO thin films have been deposited on poly(ethylene terephthalate) flexible substrate under varying radio frequency (rf) power, process pressure and thickness of IZO films using rf magnetron sputtering under $Ar/O_2$ gas mix. As the process pressure increased, the deposition rate was slightly increased and the transmittance showed little change, but the resistivity was increased. With increasing rf power, the great increase in deposition rate was observed but the transmittance showed a slight change only, and the resistivity was decreased. In addition, an attempt was made to find the optimal thickness of IZO films under varying the thickness of IZO films at the process conditions of 1 mTorr pressure and 90 W rf power, which showed lowest resistivity. IZO thin films with the thickness of $1,500{\AA}$ showed lowest resistivity and also showed highest transmittance around the wavelength zone of the maximum absorption. The power conversion efficiency of solar cells fabricated using various transparent electrodes with different thicknesses were measured and the solar cell with IZO electrode of $1,500{\AA}$ showed the maximum conversion-efficiency of 2.88 %.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.27-36
• /
• 2007

The purpose of this study was to investigate the effect of the upper body in order to increase a propulsive force in the old's walking. The subjects were each 10 males, the latter term of the aged and former term of the aged. There were three walking speeds of slow(about 5km/h), medium(about 6km/h), and maximum speed(about 7km/h). The subjects walking 11m were filmed the 5m section (from 3m to 8m) by 2-video cameras using three dimensional cinematography. And we computed different mechanical quantities and especially computed the relative momentum in order to achieve this study's aim. In this study, we was able to acquire some knowledge. The step length and step frequency increased in proportion to the walking speed, and the faster walking speed, the shorter ratio of supporting time( both legs supporting time/one step length time). When it was one leg support phase, the torso was indicated to generate the momentum in order to produce the propulsive force of walking. The upper and lower body had a cooperative relation for walking such as keeping step rate with the arms to legs and maintaining the body balance. The opposition phase for upward-and-downward direction of the torso and arms in walking was functioned to prevent the increase rapidly toward vertical direction of the center of gravity. The arms had contributed to coordinate the tempo of legs and the posture maintenance of the upper body. And by absorbing the relative momentum from the upper torso with arms to the lower torso, it had the rhythmical movement on upward-and-downward direction reducing the vertical reaction force. On account of the relations of absorption and generation of the propulsive force and the production of vertical impulse in the lower torso when walking by maximum speed, it was showed that the function of lower torso was come up as important problem for the mechanical posture stability and propulsive force coordination.

• Biomolecules & Therapeutics
• /
• v.10 no.1
• /
• pp.43-49
• /
• 2002

The present study was conducted to investigate the placental transfer and pharmacokinetics of the flu-oroquinolone antibacterial DW-116 in pregnant rats. The placental transfer and pharmacokinetics of DW-116 were examined after a single oral dose of 500 mg $^{14}C$ DW-116/kg on gestational day 18. Maternal and fetal tissues were collected at 0.17 0.5,1,2,4,8, and 24 h after dosing. Maximum radioactivity was detected in maternal plasma, placenta, and whole fetus at 1 h, and in amniotic plasma at 4 h after dosing. Thereafter, radioactivity gradually disappeared from these tissues and was 16~28% of maximum levels at 24 h after dosing. Radioactivity in whole fetus were higher than those in the maternal plasma and placenta. The $T_{1/2,abs}$, $T_{1/2,{\beta}},$ AUC, $T_{max},$ and $C_{max}$ in the maternal plasma were approximately 6 min, 13.3 h, 1620 $ug^*hr/ml,$ 0.5 h, and 136 ug/ml, respectively. Those in the placenta were approximately 20 min, 12.3 h, 2150 $ug^*h/$m\ell$,$ 1.0 h, and 172 ug/ml, respectively. Those in the whole fetus were 13 min, 12.8 h,2549 $ug^*h/$m\ell$,$ 1 h, and 191 ug/ml, respectively. In the amniotic fluid of maternal uterus, the 4T_1/2,abs}$, $T1/2,{\beta},$ AUC, $T_{max},$ and $C_{max}$ were approximately 1.3 h,9.3 h,2508 $ug^*h/$m\ell$,$ 4.4 h, and 135 ug/ml, respectively. While DW-116 disappeared biphasically from maternal plasma, whole fetus and placenta, it was eliminated monophasically from amniotic fluid. In conclusion, this study demonstrated that the absorption and distribution of DW-116 in maternal plasma and placenta were extensively rapid, and that the test chemical well passed the blood-placenta barrier and was transferred to the fetus.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 1983

This work aims at characterizing silicon grains and its compacts. In order to remove iron silicon grains were washed with 5N hydrochloride at 60-7$0^{\circ}C$ for 170 hrs, and then followed the chemical analysis by atomic absorption spectrophotometer X-ray diffraction analysis SEM observation and specific surface area determination by B. E. T. Mixtures of graded silicon particles with two or three different sizes were made into packings by mechanical vibration. The mixtures were used to make compacts with 10 mm in diameter and 70mm in length by isostatically pressing at 1, 208 kg/$cm^2$ (20 kpsi) and 4, 255kg/$cm^2$ (60 kpsi) respectively. Bulk densities of packings and compacts were measured. A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$ for the purpose of coating the uniform layer of magnesium oxide on the surface of particles. The results obtained are as follows: (1) About two thirds of iron content could be removed from silicon by washing silicon powders with hydrochloride. (2) Uniform layer of magnesium oxide on the surface of silicon could be prepared by spray-drying suspension and by decomposing it. (3) B. E. T. specific surface area of fine silicon particles was 2, 826.753$m^3$/kg. (4) In the binary system with two sizes of 40-53$\mu\textrm{m}$ particles and <10$\mu\textrm{m}$ particles the maximum bulk density of packing was 55% of theoretical value and that of compacts made at the pressure of 4, 255 kg./$cm^2$ (60 kpsi) was 73% of theoretical value. (5) In the ternary system with three sizes the maximum bulk density of packing was 1.43 g/$cm^3$and that of compacts was 1.80g/$cm^3$which is equivalent to 77.6% of theoretical value. The composition of the closest compact was consisted of 50% of 40-53$\mu\textrm{m}$ particles 20% of 10-30$\mu\textrm{m}$ particles and 30% of <10$\mu\textrm{m}$ parti-cles.