• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.345-345
• /
• 2007

ZnS/$Na_3AlF_6$/ZnS/Cu multi-layered thin film were simulated by EMP. EMP is a comprehensive software package for the design and analysis of optical thin film. ZnS and $Na_3AlF_6$ was selected as a high refractive index material and low refractive index material And Cu was selected as mid reflective material. Optical properties including color effect were systematically studied in terms of different low refractive index materials thickness. $Na_3AlF_6$ were changed 0.25, 0.5, 0.75, $1.0{\lambda}$. The thin film showed $0.25{\lambda}$ : blue, purple / $0.5{\lambda}$ : yellow $0.75{\lambda}$ : blue, purple, red / $1.0{\lambda}$ : yellow, green, blue, purple. It was becaused by different optical thickness of $Na_3AlF_6$. The maximum of optical interference by refractive layer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.234-243
• /
• 2000

This paper is to study population ecological characteristics, including growth parameters, survival rate, instantaneous coefficients of natural and fishing mortalities, and age at first capture of the soft-shelled clam, Mya japonioa in the intertidal zone of South Sea in Korea. For describing growth of the clam a von Bertalanffy growth model was adopted, The von Bertalanffy growth curve had an additive error structure and the growth parameters estimated from a non-linear regression were SH/sub ∞/=79.83mm, K=0.26, and t/sub 0/= -0.01. Survival rate (S) of the soft-shelled clam was 0.26 (SD=0.02). The instantaneous coefficients of natural mortality (M) was estimated to be 0.78/year and fishing mortality (F) 0.57/year for the soft-shelled clam. The age at first capture (t/sub c/) was estimated as 2.69 year. The mean densities of the soft-shelled clam by bottom type were 3.40 inds./m²(SE=0.18) in the sand, 63.4 inds./m²(SE= 0.53) in the muddy sand, and 0 inds./m2 (SE=0) in the gravelly sand. The mean densities of the soft-shelled clam by 3 different areas were 4.88 inds./m²(SE=0.09), 2.61 inds./m²(SE=0.13), 7.20 inds./m²(SE=0.18), respectively and the biomass of the clam were estimated as 131mt, 121mt, 665mt, respectively. An yield-per-recruit analysis showed that the current yield-per-recruit of about 8.30g with F=0.57/year and the age at first capture (t/sub c/) 2.69 year, was lower than the maximum possible yield-per-recruit of 9.60g. Fixing to at the current level and increased fishing intensity (F) could produce an increase in the predicted yield-per-recruit from 8.30g to about 9.40. However, estimated yield-per-recruit increased to 1.30g by decreasing to from the current age (2.69 year) to age two with F fixed at the current level. Yield-per-recruit was estimated under harvest strategies based on F/sub max/ and F/sub 0.1/.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.254-261
• /
• 1988

Lysimeter and field experiments were conducted in Sandy Loam to establish a simple estimation model for evapotranspiration (ET) of soybean for three years (l984-1986). Potential ET (PET) could be estimated by the eq.1 using Pan-evaporation (Eo) and was ranged from 1.1 to 4.6 mm/day during the experiments. PET (mm/day)=1.348＋0.573 Eo …(1) Crop coefficient (Kc=maximum ET/PET) could be estimated by the eq.2 using Growth degree (G=days after planting/total growing days) and was ranged from 0.2 to 1.1 and from 0.6 to 1.4 for monoculture cropping and double cropping followed by barley, respectively, during the experiments. Monoculture : Kc=0.016＋3.719 G-3.224 G$^2$…(2), Double cropping : Kc=0.609＋2.014 G-2.120 G$^2$…(2). However, the maximum Kc was shown when G was about 50% and 40% for the monoculture and the double cropping, respectively. Soil water coefficient (f=AET/maximum ET) could be estimated by the eq.3 using soil water tension (Ψ) in 15cm depth. and it was decleased to 0.2 when Ψ was 10 bar. f=0.755-0.537 log │Ψ│…(3) Consequentially, the model to estimate the Actual ET (AET) of soybean was determined as eq.4 with the correction coefficient of -0.380. AET(mm/day)=PETㆍKcㆍf -0.380 …(4) The estimated AET were compared with the measured AET to verify the model established above. The average deviation of the estimated ET(AET) was 0.5782$\pm$0.338 (mm/day), and it would be within reasonable confidence range.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.4
• /
• pp.282-290
• /
• 1992

Based on surplus production models using fishery data for the last 20 years, a stock assessment was conducted for the small yellow croaker in Korean waters. The maximum sustainable yields (MSY) from the Schaefer and Fox models were estimated to be 37,000 metric tons (mt) and 33,450 mt. Zhang's model using time-series biomass with instantaneous coefficients of fishing mortality (F) and using time-series biomass and catch yielded MSY estimates of 45,328 mt and 40,160 mt, respectively. A yield-per-recruit analysis showed that the current yield per recruit of about 20g with F= 1.11 $yr^{-l}$, where the age at first capture $(t_c)$ is 0.604, was much lower than the maximum possible yield per recruit of 43g. Fixing $t_c$ at the current level and reducing fishing intensity (F) from 1.11 $yr^{-l}$ to 0.4 $yr^{-l}$ yielded only a small increase in predicted yield per recruit, from 20 to 25g. However, estimated yield per recruit increased to 43g by increasing $(t_c)$ from the current age (0.604) to age three with F fixed at the current level. This age at first capture corresponded to the optimal length which was obtained from the $F_{0.1}$ method. According to the analysis of stock recovery strategies employing the Zhang model, the optimum equilibrium biomass $(B^*_{MSY})$ which produces the maximum yield could be achieved after approximately five years at the lower fishing intensity (F=0.5).

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.235-241
• /
• 1984

Two fractions of pectinesterase from Chinese cabbage were isolated by ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose and Sephadex G-150 gel filtration. The fraction F-A and F-B were purified approximately 340- and 10-fold. The similar salt effects and pH optima (pH 7.5-8.0) were obtained for the two pectinesterase fractions. The maximum activity of both two. fractions were obtained at 20-50mM of divalent rations and at 250mM of monovalent rations. The apparent Michaelis constant of the F-A was 0.01% for citrus pectin. The temperature optima for F-A and F-B were $48^{\circ}$ and $55^{\circ}C$, respectively and both fractions were stable in the region of pH 5.0-8.0 at room temperature. The thermal inactivation of the two fractions followed the first order reaction kinetics. From D and Z-values obtained the thermal resistance of the two fractions were characterized.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.184-185
• /
• 2011

In this study, in order to obtain a high reflectivity for the LED lead frame, tin dip coating and tin plating were conducted respectively, and wettability of LED lead frame with tin solder also was tested by wetting balance tester. A Cu sheet was plated in Cu brighten electroplating bath and followed by immersion in a Sn electro-less plating bath [1]. On the other hand, in the dip coating process, a Cu sheet was dipped into molten tin. In the progress of wetting test, besides wetting balance curve, the maximum measured force($F_m$), the maximum withdrawal force($F_w$) and zero-cross time($t_0$) were obtained in various temperatures. With the maximum withdrawal force, the surface tension was calculated at different temperatures. The Cu sheet plated with bright Cu and Sn show a silver bright property while that of Cu dipped with Sn possessed a high reflectance density of 1.34GAM at $270^{\circ}C$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.3
• /
• pp.41-56
• /
• 1989

The purpose of this study is to find out the basic data for irrigation plans of garlic and cucumber during the growing period, such as total amount of evapotranspiration, coefficients of evapotranspiration at each growth stage, the peak stage of evapotranspiration and the maximum evapotranspiraton, optimum irrigation point, total readily available moisture, and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soil texture for split plot, and three levels ; irrigation points with pP 1.7-2.1, pP 2.2-2.5, pP 2.6-2.8, for garlic and those with pP 1.9, pF 2.3, pP 2.7, for cucumber, soil textures of silty clay, sandy loam and sandy soil for both garlic and cucumber, with two replications. The results obtained are summarized as follows 1.There was the highest significant correlation between the avapotranspiration of garlic and cucumber and the pan evaporation, beyond all other meteorological factors considered, as mentioned in the previous paper. Therefore, the pan evaporation is enough to be used as a meteorological index measuring the quantity of evapotranspiration. 2.1/10 probability values of maximum total pan evaporation during growing period for garlic and cucumber were shown as 495.8mm and 406.8mm, respectively, and those of maximum ten day pan evaporation for garlic and cucumber, 63.8mm and 69.7mm, respectively. 3.The time that annual maximum of ten day pan evaporation can be occurred, exists at any stage between the middle of May and the late of June(harvest period) for garlic, and at any stage of growing period for cucumber. 4.The magnitude of evapotranspiration and of its coefficient for garlic and cucumber was occurred in the order of pF 1.7-2.1>pF 2.2-2.5>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF2.7 respectively in aspect of irrigation point and of sandy loam>silty clay>sandy soil in aspect of soil texture for both garlic and cucumber. 5.The magnitude of leaf area index was shown in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 for garlic and of pF 1.9>pF 2.3>pF 2.7 for cucumber in aspect of irrigation point, and of sandy loam>sandy soil>silty clay in aspect of soil texture for both garlic and cucumber. 6.1/10 probability value of evapotranspiration and its coefficient during the growing period for garlic were shown as 391.7mm and 0.79 respectively, while those of cucumber, 423.lmm and 1.04 respectively. 7.The time the maximum evapotranspiration of garlic can be occurred is at the date of thirtieth before harvest period and the time for cucumber is presumed to be at the date of sixtieth to seventieth after transplanting, At that time, 1/10 probability value of ten day evapotranspiration and its coefficient for garlic is presumed to be 65.lmm and 1.02 respectively, while those of cucumber, 94.8mm and 1.36 respectively. 8.In aspect of irrigation point, the weight of raw garlic and cucumber were increased in the order of pF 2.2-2.5>pF 1.7-2.1>pF 2.6-2.8 and of pF 1.9>pF 2.3>pF 2.7 respectively. Therefore, optimum irrigation point for garlic and cucumber is presumed to be pF 2.2-2.5 and pF 1.9 respectively, when the significance of yield between the different irrigation treatments is considered. 9.Except the mulching period of garlic that soil moisture extraction patterns were about the same, those of garlic and cucumber have shown that maximum extraction rate exists at 7cm deep layer at the beginning stage after removing mulching for garlic and at the beginning stage of growth for cucumber and that extraction rates of 21cm to 35cm deep layer are increased as getting closer to the late stage of growth. 10.Total readily available moisture of garlic in silty clay, sandy loam, sandy soil become to be 18.71-24.96mm, 19.08-25.43mm, 10.35- 13.80mm respctively on the basis of the optimum irrigation point with pF 2.2-2.5, while that of cucumber, 11.8lmm, 12.03mm, 6.39mm respectively on the basis of the optimum irrigation point with pF 1.9. 11.The intervals of irrigation date of garlic and cucumber at the growth stage of maximum consumptive use become to be about three and a half days and one and a half days respectively, on the basis of each optimum irrgation point.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.436-440
• /
• 2021

The impact of the gate length (L_g) on the DC and high-frequency characteristics of indium-rich In_0.8Ga_0.2As channel high-electron mobility transistors (HEMTs) on a 3-inch InP substrate was inverstigated. HEMTs with a source-to-drain spacing (L_SD) of 0.8 ㎛ with different values of L_g ranging from 1 ㎛ to 19 nm were fabricated, and their DC and RF responses were measured and analyzed in detail. In addition, a T-shaped gate with a gate stem height as high as 200 nm was utilized to minimize the parasitic gate capacitance during device fabrication. The threshold voltage (V_T) roll-off behavior against L_g was observed clearly, and the maximum transconductance (g_{m_max}) improved as L_g scaled down to 19 nm. In particular, the device with an L_g of 19 nm with an L_SD of 0.8 mm exhibited an excellent combination of DC and RF characteristics, such as a g_{m_max} of 2.5 mS/㎛, On resistance (R_ON) of 261 Ω·㎛, current-gain cutoff frequency (f_T) of 738 GHz, and maximum oscillation frequency (f_max) of 492 GHz. The results indicate that the reduction of L_g to 19 nm improves the DC and RF characteristics of InGaAs HEMTs, and a possible increase in the parasitic capacitance component, associated with T-shap, remains negligible in the device architecture.

• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.9-14
• /
• 2005

To estimate the explosion characteristics of converted gas, the study was examined into effects of altering oxygen concentration and adding hydrogen. From the result of the experiment, as the concentration of converted gas and hydrogen were increased at $21\%$ oxygen concentration, the lower explosion limit was low. Minimum explosion oxygen concentration was $6\%$. Maximum explosion pressure of converted gas was $4.61 kg_f/cm^2$, now Maximum explosion pressure rising velocity was $130.75 kg_f/cm^2/s$ at converted gas concentration $40\%$. Also, minimum ignition energy was 0.13 mJ at converted gas concentration $50\%$.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.837-844
• /
• 1994

To investigate that the theoretical formulas for extrusion forces are applicable to the manufacturing plant, the maximum extrusion forces were calculated from Siebel's and Geleji's formulas and also measured using 550 ton extrusion press. Parameters such as flow stress, $K_f$, angle of dead metal zone, $\alpha$ were obtained experimentally in order to calculate the maximum extrusion forces by the the theoretical formulas, and it was showed that the results were reliable as the deformation efficient factor, $\eta _f$ was determined to be less than 0.5. The maximum extrusion forces calculated from Siebel's formula and Geleji's formula for the angle of dead metal zone, $\alpha = 50^{\circ}$ were approached to the experimental results. However, it was found that Siebel's formula is more useful to apply to the manufacturing plant.