• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.35-44
• /
• 2007

Work-related musculoskeletal disorders (WMSDs) are a major problem in industries in which manual materials handling is performed by workers. To prevent these WMSDs, it is necessary to understand the muscular strength capability and use this knowledge to design job and selection and assignment of workers. Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. However, a few researches have been done for one-hand lifting activity of manual materials handling tasks. The objective of this study is to compare one-hand and two-hands lifting strength in terms of static and dynamic strength of the lifting activity for the ranging from the height of knuckle to elbow. It is shown in this study that the isometric lifting strength of one-hand is ranging from 54.7 to 63.3% of the one of two-hands. However, it is found that there is no significant difference between a person's isometric lifting strength for left-hand and right-hand. It is also shown that there is no significant difference between the peak force under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Similar results were obtained for the peak acceleration and peak velocity under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Isometric lifting strength at the height of knuckle was ranging from 2 to 3 times of the dynamic peak force during sub-maximal lifting. It is concluded that the dynamic peak forces under the sub-maximal loading are not highly correlated with the isometric lifting strength in similar postures.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.3
• /
• pp.102-106
• /
• 2015

Purpose: We wanted to compare the results between cadaveric and radiological measurements of calcaneus. Materials and Methods: Sixty three calcaneus of 33 cadavers donated between December 2012 and December 2014 were actually measured. Computed tomography (CT) images of 244 calcaneus in 122 patients of the same age group with cadavers were radiologically measured. Maximum length, maximum width, maximum height, $B{\ddot{o}}hler$ angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were measured. Results: In cadaveric measurement, the mean maximal height, length, and width were $41.8{\pm}3.3mm$, $73.3{\pm}3.4mm$, and $40.7{\pm}2.2mm$, respectively. In radiological measurement, the mean maximal height, length, and width were $38.5{\pm}4.3mm$, $74.0{\pm}5.7mm$, and $44.7{\pm}1.4mm$, respectively. In cadaveric measurement, the mean $B\ddot{o}hler$ angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were $32.1^{\circ}{\pm}6.2^{\circ}$, $110.8^{\circ}{\pm}8.1^{\circ}$, $55.8^{\circ}{\pm}6.8^{\circ}$, and $59.7^{\circ}{\pm}4.6^{\circ}$, respectively. In radiological measurement the mean $B{\ddot{o}}hler$ angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were $32.6^{\circ}{\pm}3.8^{\circ}$, $113.7^{\circ}{\pm}5.7^{\circ}$, $62.2^{\circ}{\pm}3.9^{\circ}$, and $61.6^{\circ}{\pm}6.3^{\circ}$, respectively. The mean maximal height was significantly higher in the cadaveric measurement group (p<0.001) and the mean maximal length and width were significantly higher in the radiologic measurement group (p<0.001, p<0.001). The mean Gissane angle, Fowler-Philip angle, and $B{\ddot{o}}hler$ angle were significantly higher in the CT group (p=0.001, p<0.001, p=0.016, respectively). There was no significant difference in the mean tala-articular angle (p=0.352). Conclusion: Significant differences in length parameters were observed between the cadaveric measurement group and the radiologic measurement group. However, no significant differences in angular measurements were observed between the two groups. The authors carefully conclude that radiological measurement values may be different from actual values in the calcaneus.

• PNF and Movement
• /
• v.8 no.3
• /
• pp.39-47
• /
• 2010

Purpose : The purpose of this study was to investigate the correlations between clinical balance scales and Balance Performance Monitor parameters in patient with adolescent idiopathic scoliosis (AIS). Methods : Twenty AIS subjects (age, $14.26{\pm}1.93yrs$; height, $160.56{\pm}7.98cm$; weight, $47.54{\pm}6.94kg$)were participated in this study. Postural sway(mean balance, sway angle, sway area, sway path, maximal sway velocity) were were evaluated by balance performance monitor. Measurements for clinical balance scales were Functional reach test (both side), the Lateral reach test (both side) and One leg standing test (both legs). Results : The results were as follows. There were positive strong correlation between major curve direction and left-right sway angle, sway path, maximal sway velocity. There were negative strong correlation between the functional reach and left-right sway angle, sway area, sway path, maximal sway velocity. And the lateral reach were also showed negative strong correlation parameters of balance performance monitor. One leg standing were negatively correlated with left-right sway angle, sway path, maximal sway velocity. Conclusion : The clinical balance scales will be useful tools for balance measurements, and basic tools for clinical setting for patient with AIS.

• The Journal of Korean Physical Therapy
• /
• v.25 no.3
• /
• pp.155-159
• /
• 2013

Purpose: Circumference of the chest and waist can be one of clinical indicator to reflect respiratory function in children with cerebral palsy. In this study, we compared to differences in the chest/waist circumference and maximal phonation time between children with spastic diplegia and hemiplegia. Methods: Seventeen children with spastic diplegic and hemiplegic cerebral palsy were recruited, who were matched to gender, age, height, weight, and body mass index for control of the known factors affected to respiratory function. The chest/waist circumference and were measured in each group, when children took a breath at rest and at maximal voluntary inspiration/expiration. Results: No significant differences were found in the chest and waist circumference and expansion between the two groups. However, only in the waist expansion, children with diplegic CP were significantly lower extensibility of lung, compared to the other group. In comparison of the maximal phonation time, a significant lower score was shown in children with spastic diplegic CP, compared to children with hemiplegic CP. Conclusion: Our results indicated that children with spastic diplegic CP had smaller chest wall and waist, compared to children with spastic hemiplegic CP. In addition, they showed a shorter time for sustaining phonation than spastic hemiplegic CP did. Therefore, spastic diplegic CP will be required for careful monitor regarding respiratory function in rehabilitation settings.

• The Korean Journal of Pain
• /
• v.35 no.3
• /
• pp.345-352
• /
• 2022

Background: Optimal needle depth in transforaminal epidural injection (TFEI) is determined by body measurements and is influenced by the needle entry angle. Physician can choose the appropriate needle length and perform the procedure more effectively if depth is predicted in advance. Methods: This retrospective study included patients with lumbosacral pain from a single university hospital. The skin depth from the target point was measured using magnetic resonance imaging transverse images. The depth was measured bilaterally for L4 and L5 TFEIs at 15°, 20°, and 25° oblique angles from the spinous process. Results: A total of 4,632 measurements of 386 patients were included. The lengths of the left and right TFEI at the same level and oblique angle were assessed, and no statistical differences were identified. Therefore, linear regression analysis was performed for bilateral L4 and L5 TFEIs. The R-squared values of height and weight combined were higher than the height, weight, and body mass index (BMI). The following equation was established: Depth (mm) = a - b (height, cm) + c (weight, kg). Based on the equation, maximal BMI capable with a 23G, 3.5-inch, Quincke-type point spinal needle was presented for three different angles (15°, 20°, and 25°) at lumbar levels L4 and L5. Conclusions: The maximal BMI that derived from the formulated equation is listed on the table, which can help in preparations for morbid obesity. If a patient has bigger BMI than the one in the table, the clinician should prepare longer needle than the usual spinal needle.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.185-195
• /
• 1991

This study was undertaken to grope the correlation of the maximal bite force and tooth-craniofacial structure. The maximal bite force of 76 adult male, aged 18-28 (mean aged: $23.4{\pm}2.2$) years, was estimated and cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. 59.61kg of bite force in first molar, 45.38kg in premolar and 17.10kg in central incisor were arranged. 2. The bite force was negatively correlated to genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and positively correlated to posterior height of face, length of mandibular body, length of ramus, facial depth in craniofacial structure. 3. The group with strong bite force showed small genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and long posterior height of face, length of mandibular body, length of ramus, facial depth. So they manifested the tendency to brachycephalic pattern, on the other hand, the group with weak bite force manifested the tendency to dolichocephalic pattern. 4. There is no correlationships between bite force and mesial inclination of premolar axis in this subject. 5. It is considered bite force have an effect upon craniofacial pattern, especially upon the lower face.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.5
• /
• pp.1319-1334
• /
• 2020

In this paper, we study the basic theory of the category of graded w-Noetherian modules over a graded ring R. Some elementary concepts, such as w-envelope of graded modules, graded w-Noetherian rings and so on, are introduced. It is shown that: (1) A graded domain R is graded w-Noetherian if and only if R^g_𝔪 is a graded Noetherian ring for any gr-maximal w-ideal m of R, and there are only finite numbers of gr-maximal w-ideals including a for any nonzero homogeneous element a. (2) Let R be a strongly graded ring. Then R is a graded w-Noetherian ring if and only if R_e is a w-Noetherian ring. (3) Let R be a graded w-Noetherian domain and let a ∈ R be a homogeneous element. Suppose 𝖕 is a minimal graded prime ideal of (a). Then the graded height of the graded prime ideal 𝖕 is at most 1.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.113-119
• /
• 1995

Many studies have been done to determine the magnitudes of force a man can exert on the objects. However, very little attention has been paid to those In postures on slopes. This paper was aimed to evalute how human work postures would affect the push/pull force and to grasp the relationships between the rectified EMG(REMG) measured at the trunk muscles and force exerted on upward slopes. Two subjects participated in the experiment. The results showed no lineal relationship between the REMG and exerted force at handle. But as the slope and handle height increased, exerted force and muscular stress on erector spinae or rectus abdominis were generally increased. It was notified that since ANOVA did not detect any statistical significance in REMG variation due to dominant muscles, careful application and interpretation of the REMG should be required in analyzing maximal force exertions.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.4
• /
• pp.413-419
• /
• 2012

The purpose of this study was to investigate the effects of increased saddle height on the length and activity pattern of vastus lateralis (VL) and biceps femoris (BF) muscle. To compare the effects of increased saddle height, Preferred (self-selected height of subject) and High saddle height (approximately 5% higher saddle height than self-selected) were used. Seven elite cyclists (career: $16.1{\pm}8.5years$) participated in 3 min. sub-maximal pedaling tests under the same cadence (90 RPM) and pedaling power (150 W). Hip and knee joint angles, and the length and activity of VL and BF were compared by measuring 3D motion and electromyography (EMG) data. Results showed that there were significant differences in peak extension timing of the hip joint angle and the range of motion of the hip and knee joint between different saddle heights. Although there were significant differences in muscle length of both muscles with increasing saddle height, the timing and amount of muscle activity differed only at the BF. These findings suggest that the timing and amount of bi-articular muscle activity (i.e. BF) can be altered by changing the saddle height. For practically applying these results, further study is necessary to evaluate the effects of various cadence and the pedaling power with various saddle heights.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.83-89
• /
• 2015

PURPOSE: The purpose of this study was to investigate the vital capacity and maximal voluntary ventilationin subjects with forward head posture (FHP). METHODS: Twenty-eight subjects participated in this study (normal 14, FHP 14) and were resident in B city. The mean age, height and weight of subjects was 22.80yrs, 169.36cm and 62.79kg. Subjects were asked to breath maximally for FVC and repeatedly for MVV during 12 seconds. The variables of data were collected as follows: Forced Vital Capacity(FVC), Forced Expiratory Volume in One Second($FEV_1$), $FEV_1$/FVC, Maximal Voluntary Ventilation(MVV). Each trial was performed by 3 times and we used the means to analyze the data. The mann-whitney U test and independent t-test were used to compare the vital capacity between normal and FHP subjects. All statistical analyses were performed using SPSS 21.0 for window versionand p-values less than 0.05 were used to identify significant differences. RESULTS: The FVC, $FEV_1$, $FEV_1$/FVC and MVV of FHP subjects were decreased more than that of normal subjects and the difference was statistically significant between two groups. CONCLUSION: The vital capacity of subjects with FHP was generally lower than normal subjects. This study shows that the vital capacityof subjectswith FHP could be decreased due to the bad neck posture that weakens the respiratory accessory muscles of neck.