• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.587-592
• /
• 1992

Sheets of SiC-SiC whisker maxed matrix were prepared from the mixed slurry of SiC whisker and SiC matrix by the rolling method. With the increase of SiC whisker, the pore size, the porosity and the phosphoric acid absorbency of the matrix were increased, while the bubble pressure was decreased. The activation energy for the transfer of H+ ion was decreased with the increase of mixing ratio of SiC whisker to the SiC matrix from the measurement of hydrogen ion conductivity. The activation energy was evaluated as 0.25 eV when the mixing ratio of SiC whisker to the SiC matrix was 1 : 2 and the activation energy was 0.16 eV for the 2 : 1 matrix. It means that SiC whisker matrix contributes to attain a better microstructure for the diffusion of hydrogen ion. From the measurement of single cell performance of matrix with various mixing ratio, it is concluded that if SiC-SiC whisker maxed matrix has a sufficient bubble pressure to prevent the crossover of H2 gas, the current density of a fuel cell is increased with the increase of acid absorbency of the matrix. Current density was improved from 140 mA/$\textrm{cm}^2$ for 0.25 mm thickness of matrix to 170 mA/$\textrm{cm}^2$ for the 0.20 mm one at 700 mV.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제27권4호
• /
• pp.231-249
• /
• 2020

We present an efficient and robust finite difference method for a two-asset jump diffusion model, which is a partial integro-differential equation (PIDE). To speed up a computational time, we compute a matrix so that we can calculate the non-local integral term fast by a simple matrix-vector operation. In addition, we use bilinear interpolation to solve integral term of PIDE. We can obtain more stable value by using the payoff-consistent extrapolation. We provide numerical experiments to demonstrate a performance of the proposed numerical method. The numerical results show the robustness and accuracy of the proposed method.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.23-28
• /
• 2013

Epoxy resins are widely used in microelectronics packaging such as printed circuit board and encapsulating for semiconductor manufacturing. Water can diffuse into and through the epoxy matrix systems and moisture absorption at boarding interfaces of matrix resin systems can lead to a hydrolysis at the interfaces resulting in delamination of encapsulating materials. In the study, the changes of diffusion coefficient and moisture content ratio of epoxy resin systems with nano-sized fillers according to the change of liquid type epoxy resins were investigated. RE-304S, RE-310S, RE-810NM and HP-4032D as a epoxy resin, Kayahard AA as a hardener, and 1B2MI as a catalyst were used in these epoxy resin systems. After curing, moisture content ratios were measured with time under the 85 and 85% relative humidity condition using a thermo-hydrostat. The maximum moisture absorption ratio and diffusion coefficient of EMC decrease with the filler content. It can be seen that these decreases are due to the increase of filler surface area and the decrease of moisture through channel with the content of nano-sized filler.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.273-278
• /
• 1998

The phase stability of atomized U-10wt. ％Mo powder and the thermal compatibility of dispersed fuel meats at 40$0^{\circ}C$ and 50$0^{\circ}C$ have been characterized. Atomized U-10Mo powder has a good \ulcorner-U phase stability, and excellent thermal compatibility with aluminum matrix in a dispersion fuel. It is thought that the good phase stability is related to th large supersaturation of Mo atoms in the atomized particles. The reasons for the excellent thermal compatibility have been considered to be as follows. Before thermal decomposition of ${\gamma}$-U in particle, supersaturated Mo atoms at ${\gamma}$-U grain boundaries inhibit the diffusion of Al atoms. After thermal decomposition of ${\gamma}$-U into ${\gamma}$-U and U$_2$Mo, the intermetallic compound of U$_2$Mo seems to retard the penetration of Al atoms. The penetration mechanisms of aluminum atoms in the atomized particles are assumed be classified as (a) diffusion through the reacted layer between fuel particles and Al matrix leaving a kernel-like unreacted island and (b) diffusion along grain boundaries showing several unreacted islands and more reacted regions.

• 폴리머
• /
• 제34권5호
• /
• pp.415-423
• /
• 2010

고검화도(98%이상)의 폴리(비닐 알코올)(PVA)를 디메틸설폭사이드(DMSO) 용매에 녹인 뒤 PVA 준희박 용액 대에서 농도 $C{\simeq}0.14\;g/mL$까지 점성도를 측정하였으며, 이 시스템을 매트릭스로 하여 폴리스티렌(PS) 라텍스 입자의 확산운동 지연을 동적 광산란법으로 조사하였다. PVA/DMSO계의 점성도를 고유점성도 $[{\eta}]$로 스케일된 환산농도 $C[{\eta}]$에 대하여 도시하였을 때 C$[{\eta}]$ >2에서는 분자량 의존성이 강하게 나타났으며, 그 원인은 PVA 용액 내에 존재하는 불균일 영역때문인 것으로 추정하였다. 그러나 매트릭스 내에서 탐침입자의 확산운동은 모든 측정농도에서 단일모드로 관찰되었고, 용액상 및 용매상에서의 확산계수의 비인 D/Do를 $C[{\eta}]$로 도시할 때 전체 농도 범위에서 분자량 의존성은 전혀 나타나지 않았으나 신장지수함수의 적용 한계는 C$[{\eta}]$ >2.5인 것으로 관찰되었다.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.3015-3029
• /
• 1996

The notion of effective transport property of a heterogeneous medium implies that the medium is large enough that the ergodic theorem holds and local fluctuation of the property can be neglected. In case that the medium is not large enough compared to its characteristic microstructure length scale, the effective property fluctuates and differs from the value of the medium being large enough. As a representative transport phenomenon, diffusion was considered and the fluctuation of varying effective diffusion property, diffusion coarseness $C_k$, was defined as a quantifying parameter. Scaled effective diffusion property, $^*$>/k$_1$ and $C_k$ were computed for the two phase random media consisting of matrix of diffusion coefficient k$_1$ and spheres of diffusion coefficient k$_2$. Numerical simulations were performed by use of the so-called first passage time technique and data were collected for existing microstructure models of hard spheres(HS), overlapping spheres(OS) and penetrable concentric shells(PCS).

• ETRI Journal
• /
• 제11권4호
• /
• pp.84-97
• /
• 1989

The influence of Zn, Si and Te diffusion on the interdiffusion in $GaAs-Ga_1_-xIN_xAs_1__yP_y$and InP$Ga_1__xIn_xAs_1__yP_y$ heterostructures was studied. The heterostructures were grown by liquid phase epitaxy, and the impurity diffusion into the heterostructures was carried out using metal compound or element sources. The extent of interdiffusion for both group III and V atoms was observed by depth profiling of matrix elements with secondary ion mass spectrometry and Auger electron spectroscopy. Selective enhancement of cation interdiffusion was observed by the concurrent Zn diffusion in both the GaAs based-and InP based-crystals. In contrast to the Zn diffusion, the Si diffusion in the GaAs based-crystal and the Te diffusion in the InP based-crystal enhanced both cation and anion interdiffusion to the same extent. A kick-out mechanism is proposed to explain the selective enhancement of the cation interdiffusion due to Zn, and a single vacancy mechanism is proposed for the interdiffusion due to Si and Te.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권11호
• /
• pp.610-614
• /
• 2014

많은 과학 데이타처럼 화산재 확산 시뮬레이션 결과는 NetCDF 형식의 군집화된 희소행렬이다. 그리고 크기가 커서 저장과 전송에 많은 비용이 발생한다. 본 논문에서는 다차원 인덱스를 일차원으로 바꾸고 연속된 0을 그 시작점과 길이만을 기록하여 화산재 확산 시뮬레이션 데이터의 크기를 줄이는 방법을 제안한다. 이 방법은 기존의 ZIP 형식으로 압축한 것과 거의 같은 성능을 보이나 NetCDF의 구조는 손상하지 않는다. 제안된 방법에 의하면 데이터 크기가 줄어들어 저장공간의 효율이 높아지고 네트워크 전송시간이 줄어드는 효과를 기대할 수 있을 것이라 사료된다.

• Nuclear Engineering and Technology
• /
• 제20권3호
• /
• pp.197-202
• /
• 1988

장기 용출율을 예측하기 위하여 유한 격판 근사 방법이 개발되었다. 이 방법은 폐기물 고화체에서의 방사성 동위원소 확산 특성이 고화체 형태에 관련되지 않고 체적/면적비 (V/S)와 확산계수에만 의존한다는 가정에 근거하고 있다. 결과적으로 용출율은 동일 체적/면적비를 갖는 유한 격판을 기술하는 방정식의 해로 표시할 수 있다. 유한 격판 근사 방법을 사용한 계산 결과는 유한 원통과 유한 구형에 관한 확산 해석에 관한 해와 비교되었다. 여기서 도출된 단순 모델은 다른 모델과의 비교 결과 잘 일치하고 있고 방사성 핵종의 용출 현상에 관한 장기 예측에 전반적인 응용이 가능한 것을 보여준다.

• 한국세라믹학회지
• /
• 제40권10호
• /
• pp.1015-1020
• /
• 2003

$\rho$-알루미나 결합 진동성형용 알루미나 캐스터블 내화물의 매트릭스부분과 용응 슬래그와의 침식거동을 젭센(Jabsen)이 주장한 이론을 기초로 하고 킹거리(Kingery)가 제안한 반응 기구를 통해 규명하였다. 매트릭스 부분의 초기침식이 분자확산거동에 의하여 지배되며, 아레니우스 관계식과 잘 일치하고 있어 온도의존성 활성화 과정으로 받아들 수 있다. 슬래그와 경계층의 Ca 농도차이가 23.2%로서 경계층을 형성하기 위한 물질이동의 구동력이 되었다. 매트릭스의 침식정도가 뮬라이트 소결체보다 심하지만 킹거리의 침식반응 기구와 잘 일치하고 있어 캐스터블의 수명예측이 가능하다.