• 한국식생활문화학회지
• /
• 제15권2호
• /
• pp.123-137
• /
• 2000

Korea market of food service industry has been increased greatly since early 90's with the emergence of professional catering business and the expansion of school food service. Because of the characteristics of food service establishment, feeding many people at a time, there is always a high potential of foodborne outbreak which requires special sanitary management to prevent. Currently, many catering businesses are interested in HACCP(Hazard Analysis Critical Control Points), a new sanitary management system, and are trying to develop HACCP Plans for their food service establishment. Microbiological hazard analysis, a most important step for developing HACCP Plan, provides also basic information for evaluating sanitary aspect of prepared foods and their materials. There are not extensive data of microbiological hazard analysis for food service operations, especially for prepared foods and raw materials, which are helpful for developing a HACCP Plan. The extensive microbiological hazard analyses for 65 prepared foods and 51 raw materials selected from a couple of food service establishment were performed in this research. These results will provide useful information to determine hazards for developing a HACCP plan, and also to understand sanitary status for prepared foods and raw materials in food service establishment.

• 한국대기환경학회지
• /
• 제10권2호
• /
• pp.90-97
• /
• 1994

PIXE( Proton Induced X- ray Emission ) analysis has been applied to the analysis of aerosol for the Purpose of pollution monitoring. Coarse and fine Particle fractions were sampled selectively, using Nuclepore filter in stacked filter units, once a month from February to September in 1993 at urban and rural sites. Concentration of 9 elements, Si, S, K, Ca, Mn, Fe, Cu, Zn and Pb was determined without Pretreatment of Samples. Comparison of data between urban and rural site revealed higher elemental concentration level in urban aerosol. From April to May aerosol sampling was carried out daily to observe the effect of Yellow Sand on the composition of aerosol in the Korean Peninsula. During the Yellow Sand period, Si, Ca, Fe content level in aerosol became more than 5 times higher than normal. The elemental concentration of the aerosol samples of Daejeon City was compared with that of two foreign cities. S and Pb( which are fuel- derived elements) levels in Daejeon City aerosol appeared to be lower than those of foreign cities. And it may be due to the leaded-fuel restriction policy of Korean government since 1987.

• 유통과학연구
• /
• 제17권2호
• /
• pp.35-42
• /
• 2019

Purpose - There is little research on the market of foreign infant education materials. So, it is needed to deeply examine the development and preference factors of foreign infant education materials. Therefore, this study presents a future method and model for analyzing the important variables of buying foreign infant education materials. Research design, data, and methodology - The conjoint analysis method and model of this paper is used as follows. Conjoint analysis method is possible to derive the attributes to be analyzed through the model of the preferred factors, and then to derive the sub-attributes of the attributes. Results - This study derived preference attributes between brand benefit, equity (brand image, loyalty, awareness), distribution network (department store, specialty stores, discount store, internet mall), and service quality (tangibles, reliability, responsiveness, assurance, empathy) in infant education materials conjoint model. Conclusions - Since the opening of the education market in Korea, parents have a high education level due to low birth rate. The advantages of the conjoint analysis method have been extended to the study of infant education materials. Based on this, this paper will identify important attributes that are considered in preference of foreign infant education materials and help to establish and implement future marketing strategies.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.252-253
• /
• 2017

The appearance & spread of new kind of virus might cause national economic shrinkage and reduction of foreign tourist. Finally, severe damage of national economy happens. This research wants that after property analysis for generally applied building interior materials, specifically eco-environmental materials including functional materials are reviewed, classified and their special properties in building were investigated.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.97-103
• /
• 2012

This study investigates thermal insulation properties of multi layer materials depending on thickness of air layers. Numerical analysis on the heat flow of different insulating materials was conducted to identify whether their temperature distributions demonstrate the reduced rate of heat transfer conclusively or not. Analytical model is divided into two categories. One is to distinguish temperature distribution of the air-layer materials from the non-air layer ones. The other is to compare the efficacy between eight-layered insulating materials with no air-layer contained and three-layered insulating materials which include an air-layer definitely. In the latter case, the identical thickness is assigned to each material. The effect of thermal insulation by including an air-layer is verified in the first analytical model. The result of the second model shows that the insulation of the eight-layered materials is coterminous at the three-layered ones with an air-layer and the thermal insulation of the two materials is imperceptible. The benefits of cost and energy saving are anticipated if air-layers are efficiently incorporated in multi layer insulating materials in a greenhouse.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1116-1128
• /
• 2008

The purpose of this study was to investigate the effects of clothing materials on the atopic determatitis of atopic patients. A questionnaire was used as the measurement tool of this study. The survey of questionnaire was performed for atopic patients of 987. For the statistical analysis of data, $X^2$-test and percentage of SPSS were used. In the analysis results of the clothing materials which are both effective and ineffective against atopic determatitis, the results indicate that the most effective clothing materials for atopic determatitis were the those containing natural aroma and the most ineffective clothing materials for atopic determatitis were the those containing nylon. In the difference analysis results of both the relapse materials and the relapse factors for atopic determatitis according to demographic variables, both the relapse materials and the relapse factors for atopic determatitis showed a significant difference according to gender, age, educational background, monthly income, and occupation. Consequently, the results of this study will help develop the clothing materials suitable for atopic patients and lay the foundation for managing atopic determatitis more effectively through the rational choice of clothing of atopic patients.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.112-116
• /
• 2013

Surface modification of montmorillonite (MMT) with 3-glycidoxypropyl trimethoxysilane (3GTO) in mild methanol/water mixture has been investigated in detail. The influence of reaction conditions (including silane concentration in feed, reaction time and reaction temperature) on the grafting amount and yield of silane, and further on the grafting pattern of silanes was studied by thermogravimetric analysis, elemental analysis, X-ray diffraction (XRD) and BET. Higher silane concentration, longer reaction time and higher reaction temperature are all benefit to higher grafting amount. When the grafting reaction was performed with 3 mmol/g silane concentration, at $90^{\circ}C$ for 24 h, the grafted amount and yield of silane reached 1.4443 mmol/g and 30%, respectively. Based on the XRD and BET data analysis, a speculation that the grafting pattern of silanes was concentration dependence was proposed.

• 복식문화연구
• /
• 제16권4호
• /
• pp.681-695
• /
• 2008

This study was accomplished to investigate the preference of clothing materials and the clothing demand performance for underwear and everyday dress of atopic patients. As this study was the research study by a use of a questionnaire, the finally total 987 copies of the collected questionnaires were used to analyze the data. SPSS was used for the statistical analysis of data. To analyze the data, frequency analysis, percentage, $X^2$-test, reliability analysis, factor analysis, t-test, ANOVA and Duncan's multiple comparisons were used. The results obtained are as follows. In factor analysis for clothing materials and the demand performance which atopic patients favor, the preference factors for underwear materials were classified as pliability/a sense of weight, a sense of cold and warmth, tactility, and elasticity. Those for everyday wear were classified as pliability/surface roughness, a sense of cold and warmth, a sense of weight, and elasticity. And the demand performance factors for underwears were classified as thermophysiology, care convenience, and skin contact. Those for everyday wear were classified as comfortableness and care convenience. In the difference analysis for the preference and the demand performance, Both everyday wear and underwear showed a significant difference for the preference and the demand performance according to gender, age, income, education level, and occupation.

• 한국농촌생활과학회지
• /
• 제6권1호
• /
• pp.11-24
• /
• 1995

The new textile materials may be defined as textile materials different from already existing ones in the physical and chemical structure, manufacturing process, or end-use property. The present time what is called the post-industrial society is characterized by rapid change and new technology. Also, textile materials have been changed rapidly and diversely in the post-industrial society than in any other periods. The study aimed to analyze the trend of new tektite materials development in Korea and to forecast the development trend in the future. To investigate the trend of new textile materials, various written materials and informations were collected from the manufacturers, textile related periodicals, and research journals, and they were analyzed. The period of analysis was from January 1992 to May 1995. The results of this research are as followings : (1) Mixed textile materiasl such as bicomponent fiber, blended yam and blended fabric were increased. (2) High technology has an important effect upon new textile material development. (3) functional textile materials were increased (4) The high value-added products were increased. (5) The naturalized textile materials were increased.

• 한국재료학회지
• /
• 제6권9호
• /
• pp.871-877
• /
• 1996

가스터빈용 단결정 주조 블레이드는 기포 및 Freckle등과 같은 주조결함이 없어야 하며, 수지상, ${\gamma}$'크기와 모양에 따라 화학조성이 다르며, 기지와 공정조직을 각각 2영역 및 3영역으로 분류할 수 있었다. 또한, Ti는 첨가원소호서 조직제어에 매우 중요한 역할을 하였다.