• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.812-817
• /
• 2004

Recently drastic improvement of railway technology has been accompanied by the construction of very high-speed tracks. It should be noticed that Continuously Welded Rail(CWR) has played significant role in technical development of railway and that installation of CWR is now being scheduled on existing lines as well as newly-built lines. In general, interaction between CWR and bridge deck takes place on bridge section and additional axial force and displacement is to be developed owing to temperature and braking/acceleration forces. This interaction is known to be mainly governed by span organizations and arrangements of foot bearings. In common practice, movable bearing is stationed and designed on the assumption that it is not able to transfer the horizontal force of upper decks. However, it is well known that horizontal resistance is developed in movable bearings due to friction and that friction coefficient of movable bearing is ranged from 0.03 to 0.20 depending on the material of bearings and magnitude of reactions. Therefore, it is easily reasoned out that friction of movable bearing can influence the mutual behavior of CWR and bridge decks. Suggested in this study is to investigate the validity and efficiency of friction effect of movable bearings in controlling the axial force and displacement of CWR on continuous railway bridges.

• Carbon letters
• /
• v.4 no.1
• /
• pp.36-39
• /
• 2003

Carbon and carbon-based materials are used in nuclear reactors and there has recently been growing interest to develop graphite and carbon based materials for high temperature nuclear and fusion reactors. Efforts are underway to develop high density carbon materials as well as amorphous isotropic carbon for the application in thermal reactors. There has been research on coated nuclear fuel for high temperature reactor and research and development on coated fuels are now focused on fuel particles with high endurance during normal lifetime of the reactor. Since graphite as a moderator as well as structural material in high temperature reactors is one of the most favored choices, it is now felt to develop high density isotropic graphite with suitable coating for safe application of carbon based materials even in oxidizing or water vapor environment. Carboncarbon composite materials compared to conventional graphite materials are now being looked into as the promising materials for the fusion reactor due their ability to have high thermal conductivity and high thermal shock resistance. This paper deals with the application of carbon materials on various nuclear reactors related issues and addresses the current need for focused research on novel carbon materials for future new generation nuclear reactors.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.216-222
• /
• 2021

Advances in technology have given educators a tool to empower them to assist with developing the best possible human resources. Teachers at universities prefer to use more modern technological advances to help them educate their students. This opens up a necessity to research the capabilities of cloud-based learning services so that educational solutions can be found among the available options. Based on that, this essay looks at models and levels of deployment for the e-learning cloud architecture in the education system. A project involving educators explores whether gement Systems (LMS) can function well in a collaborative remote learning environment. The study was performed on how Blackboard was being used by a public institution and included research on cloud computing. This test examined how Blackboard Learn performs as a teaching tool and featured 60 participants. It is evident from the completed research that computers are beneficial to student education, especially in improving how schools administer lessons. Convenient tools for processing educational content are included as well as effective organizational strategies for educational processes and better ways to monitor and manage knowledge. In addition, this project's conclusions help highlight the advantages of rolling out cloud-based e-learning in higher educational institutions, which are responsible for creating the integrated educational product. The study showed that a shift to cloud computing can bring progress to educational material and substantial improvement to student academic outcomes, which is related to the increased use of better learning tools and methods.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.61-66
• /
• 2015

PVC pipe has excellent corrosion resistance and chemical resistance and is broadly used. However there are no regulations regarding exposed piping material in buildings. There is growing concern about the vulnerability of piping to fires and generating toxic gas. Exposed piping should be made of incombustible materials to prevent spreading of toxic gas and to minimize damage to life and property in case of fire. Many big structures are being built, and concerns regarding damage by fire are continuously growing. In these circumstances, we should reinforce fire safety standards for buildings and heighten safety consciousness to become a well-developed country. For these reasons, we investigated the materials used for exposed piping and the standards of well-developed countries to enhance safety. We tried to figure out the alternatives by examining the actual conditions of each region's buildings. Based on the use of incombustible materials for exposed piping in each region, we tried to enhance the effectiveness for safety by suggesting revisions for related laws and regulations.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.347-364
• /
• 2010

Since its invention in the $19^{th}$ century, Reinforced Concrete (RC) has been widely used in the construction of a lot of different structures, as buildings, bridges, nuclear central plants, or even ships. The details of the mechanical response for this kind of structures depends directly upon the material behavior of each component: concrete and steel, as well as their interaction through the bond-slip, which makes a rigorous engineering analysis of RC structures quite complicated. Consequently, the practical calculation of RC structures is done by adopting a lot of simplifications and hypotheses validated in the elastic range. Nevertheless, as soon as any RC structural element is working in the inelastic range, it is possible to obtain the numerical prediction of its realistic behavior only through the use of non linear analysis. The aim of this work is to develop a new kind of Finite Element: the "Enhanced Solid Element (ESE)" which takes into account the complex composition of reinforced concrete, being able to handle each dissipative material behavior and their different deformations, and on the other hand, conserving a simplified shape for engineering applications. Based on the recent XFEM developments, we introduce the concept of nodal enrichment to represent kinematics of steel rebars as well as bonding. This enrichment allows to reproduce the strain incompatibility between concrete and steel that occurs because of the bond degradation and slip. This formulation was tested with a couple of simple examples and compared to the results obtained from other standard formulations.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.319-327
• /
• 2017

Studying the structural behavior of prestressed segmented girders is quite important due to the large use this type of solution in viaducts and bridges. Thus, this work presents a nonlinear three-dimensional structural analysis of an externally prestressed segmented concrete girder through the Finite Element Method (FEM), using a customized ANSYS platform, version 14.5. Aiming the minimization of the computational effort by using the lowest number of finite elements, a new viscoelastoplastic material model has been implemented for the structural concrete with the UPF customization tool of ANSYS, adding new subroutines, written in FORTRAN programming language, to the main program. This model takes into consideration the cracking of concrete in its formulation, being based on fib Model Code 2010, which uses Ottosen rupture surface as the rupture criterion. By implementing this new material model, it was possible to use the three-dimensional 20-node quadratic element SOLID186 to model the concrete. Upon validation of the model, an externally prestressed segmented box concrete girder that was originally lab tested by Aparicio et al. (2002) has been computationally simulated. In the discretization of the structure, in addition to element SOLID186 for the concrete, unidimensional element LINK180 has been used to model the prestressing tendons, as well as contact elements CONTA174 and TARGE170 to simulate the dry joints along the segmented girder. Stresses in the concrete and in the prestressing tendons are assessed, as well as joint openings and load versus deflection diagrams. A comparison between numerical and experimental data is also presented, showing a good agreement.

• Journal of Fashion Business
• /
• v.1 no.3
• /
• pp.19-34
• /
• 1997

The role of fashion image in modern society is being diversified from product planning to consumer satisfaction. In this research, after surveying female college students, the diversified modern fashion image was patterned. On the analogy of the relationship between these patterned image and design factors, the following conclusion was obtained. 1. The most popular styles are jacket and pants suits, three-piece outfits, tight mini-skirts and X-silhouette. Little decoration is used in general. simplicity is shown as trend by utility fabrics in single color-black, brown, beige and blue-with no pattern. Various materials such as wool, cotton, wool or cotton blended with other materials, silk, satin, knit, lace, vinyl and leather are used. 2. Fashion image is divided into four factors; factors that show fad, dignity, activity and simplicity. 3. Factors that show fad; style of tops, material of bottoms and length of bottoms reflect fad. blousons, three-piece outfits, pants rather than skirts, X-silhouette and mini-skirts are prevailing. Vinyl, leather, knit, lace and satin are the materials well used. 4. Factors that show dignity; Style and material of tops, the way of top and bottom pieces are matched and length of bottom or pieces reveal the characteristics. Jackets, blouses, half-coats and one-piece outfits rather than two-pieces are popular. Tight skirts in natural or midi length or pleated skirts are common. Wool, wool blended with other materials, leather and X-silhouette are design factors that reveal dignity well. 5. Design factors that show active image; Straight pants, three-piece outfits, T-shirts, shirt -blouses, vests, and blausons are popular. Knit and lace are used for tops, leather and vinyl are used for bottom pieces and cotton is widely used. Y- or H-silhouette are used to show active image.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.105-109
• /
• 2014

The recent rising living standards, environment-friendly, well-being and health aspects of life in the basic gratification, as well as the desire for a pleasant environment emotionally environmentally friendly way of external space or industrial interest in the indoor environment, the manifestation. In particular, the biggest problem of the indoor environment has been emerged as a Sick House Syndrome indoor space that is provided to the building materials, and the impact on the domestic and the indoor environment, and clean the house in a health standards are specified as laws. The performance rating and the various materials to create environmentally-friendly standards for building materials. The more detail, Porous clay material, toxic substances released by applying the high humidity and the water itself, and to absorb the moisture, if the emissions, without a separate device, to maintain a comfortable indoor environment and at the same time, one of the causes of Sick House Syndrome breaking down harmful substances to absorb a comfortable indoor environment to maintain an environmentally-friendly building interior material studies. It is aimed at the development to multi-functional high performance eco-friendly construction materials, rather than through one feature performance, identify key features for national and international eco-friendly building materials can exert Water Vapour Adsorption raw, decomposed materials for the application and selection.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-130
• /
• 2004

Plant-based cultural assets using straw and grass as household goods of our people's have been used as indispensable tools for practical living for a very long time. However, only a limited number of artifacts were unearthed so far due to tile fragility of the material. For this reason, research on plant-based cultural properties had close to no progress, and the appropriateness of the PEG method, high-grade alcohol method, alcohol--ether-resin method, and Paraloid B-72 used in preserving plant-based cultural properties has not been sufficiently investigated. Therefore, this study examined the weight change rate by applying the methods of Primal MC-76 and vacuum freeze-drying used mostly as a earth-layer hardening material among PEG and acrylic resin, which are applied widely for preservation of waterlogged archaeological wood, as a means to preserve plant-based cultural properties along with the examination of the subject material, and an experiment was also performed on moisture absorption. The findings as a result were, first, the plant-based material being studied was found to be Typha (Typha orientalis Presl). Secondly, the weight change experiment applying $PEG\#400$ and $PEG\#4000$ confirmed a steady increase of weight if PEG -2Step is used for treatment. Third, in preserving all subject materials with soil, treatment with $PEG\#4000$, Primal MC-76, and vacuum freeze-drying showed that tile vacuum freeze-drying method resulted in the largest or $20\%$ reduction in weight, while Primal MC-76 resulted in $18\%$ and $PEG\#4000$ in $8\%$ of weight reduction. It was concluded that, considering the stability of soil measurement, this came to be because resin permeation was carried out along with tile drying process. Fourth, the weight changes were found to be around $10\%$ in various humidity conditions after the preservation treatment. The greatest weight change rate was seen in the case of $PEG\#4000$, particularly having chemicals gush out in a high humidity (RH $84\%$ or higher) environment. In the case of Primal MC-76 and vacuum freeze-drying methods, $6\~8\%$ weight changes were detected, and the lowest weight change was found in the case of the vacuum freeze-drying method. Fifth, as for color changes after treatment, blackening occurred most strongly with $PEG\#4000$, while Primal MC-76 and vacuum freeze-drying manifested colors closest to dry straw or grass. However, the texture of straw was not very evident in the case of Primal MC-76, due to a glossy surface, but vacuum freeze-drying was found to offer tile best result in terms of texture. Putting together the results of the above experiments, vacuum freeze-drying presented after being treated with PEG2-Step the most stabilized changes in weight, while it offered the smallest change in color as well.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.157-164
• /
• 2007

Human made a vessel which was made naturally to store something being hunted and picked, which was a great invention.(n modern times, society changed and development of science gave us convenience in making a vessel and various kinds of store instruments which was made of pure natural material), They have built the house which became to be a part of nature, and studied a method of storing food to eat for four seasons, then displayed a storage house and storage containers everywhere of the house. Now Korean has the custody of kimchi in refrigerator at every house. With hot wind of well-being, Korean food is becoming to be globalized, according to this the world shows concern seriously about the pottery This study have three purposes, the first. checking documents about the development history of pottery which is a kind of ceramic, and then the second, through an scientific experiment, with studying characteristic of pottery being built by the wisdom of ancestors, informing the merit of pottery and necessity to the world, and futhermore, the third, working up the development of close environmental vessels putting to use the characteristic of pottery.