• 만화애니메이션 연구
• /
• 통권10호
• /
• pp.17-31
• /
• 2006

이 논문은 빠르게 발전하는 디지털 정보 매체와 산업의 흐름에 대한 학문적 대응이 부족한데서 비롯되는 문제점 지적과 그에 대한 대안을 제시하고자 하는 의지에서 시작되었다. 현재 우리나라에서는 만화애니메이션분야와 관련한 기초학문 연구와 교재개발, 체계화 등이 필요한 실정이며 관련된 모든 분야의 근간이라고 할 수 있는 용어표준화와 용어사전의 마련을 위해 만화애니메이션 주요 선진국인 미주, 유럽, 일본 등의 교육, 산업현장, 학술단체인학회 등의 전문가를 초빙하여 국제용어의 규약을 만들기 위한 업무를 추진하고 있으며 새로운 용어의 발굴과 해설 작업이 부가된 용어의 통일, 규격화된 사전편찬연구를 상당부분 진행하였다. 이 연구결과물로 편찬되는 사전은 국내외 업계, 학계, 현장, 교육기관 등의 수많은 수요자들의 용어사용에서 발생되는 오류와 애로사항을 해결하는 기초가 될 것으로 기대한다.

• Journal of Acupuncture Research
• /
• 제21권4호
• /
• pp.159-176
• /
• 2004

Objective : To present a criteria for acupuncture standardization, which will improve quality of acupuncture and secure safety, through studies of the biocompatibility of acupuncture. Methods : The acupunctures distributed in Korea were studied. The chemical composition, elasticity, and the solidity of the acupuncture's metal material was analyzed. Results & Conclusions : 1) The acupunctures distributed in Korea were all produced with ST304. Because acupuncture is used on a living body, the corrosion resistance, allergy proof and magnetism of the metal material should be considered. In this point, STS316 stainless steel would be more suitable than ST304. 2) The elasticity and solidity of the acupuncture's metal material distributed in Korea meet the medical instrument standards of the Korea Food and Drug Administration. But since the standards are only roughly outlined, the criteria should be realized and standardized.

• 한국건설관리학회논문집
• /
• 제15권1호
• /
• pp.101-110
• /
• 2014

2013년 국토교통부에서는 현 정부의 주요 국정과제인 행복주택 사업의 일부를 모듈러건축 시스템으로 시범공급하겠다라고 밝혔다. 이처럼 모듈러 건축에 대한 정부의 적극적인 의지와 함께 모듈러 건축시장의 규모도 점차 확대되고 있다. 현재 모듈러건축의 주요 문제점으로 설계-제작단계에 있어 자재 및 부품의 표준화 또는 규격화 미비가 거론된다. 이때, 모듈러건축은 기존의 타공법에 비해 재료비의 비중이 16~17% 높은, 전체공사비의 60%를 차지 할 정도로 자재관리가 중요하다고 판단된다. 하지만, 설계상의 표준화 또는 규격화의 미비로 제작단계의 자재 손실율이 높아지게 되고, 이에 따른 건설폐기물 뿐만 아니라, 재료비 증가에 따른 전체 공사비도 증가하게 된다. 본 연구에서는 벽체 마감자재 중 석고보드 자재에 대한 손실율을 최소화 할 수 있는 최적화 알고리즘을 개발하여 대상 사례의 주요 모듈에 대해 검증하고자 한다. 이를 통해, 자재의 낭비적인 요소를 최소화하여 친환경 건축에 기여할 뿐만 아니라, 현 모듈러건축의 단점으로 인지되고 있는 고비용의 경제성 문제를 해소하는데 기여할 수 있을 것으로 기대한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.45-50
• /
• 2004

In this study, we processed two procedures of application test of filler for special-purpose utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• 생약학회지
• /
• 제41권1호
• /
• pp.48-53
• /
• 2010

GCSB-5 preparation is a purified extract from a mixture of 6 medicinal plants(Acanthopanacis Cortex, Achyranthis Radix, Saposhnikoviae Radix, Cibotii Rhizoma, Glycine Semen Nigra, Eucommiae Cortex) that have been widely used for the treatment of various bone disorders. The aim of this study was to investigate HPLC analysis method and screening of standard compound on Cibotii Rhizoma for quality standardization of a medicinal crude drug GCSB-5. Onitin-4-O-$\beta$-D-glucopyranoside was isolated from Cibotii Rhizoma as the standard compound and identified on the basis of spectroscopic data such as NMR. HPLC analysis method for the determination of onitin-4-O-$\beta$-D-glucopyranoside was established for the quality control of the medicinal plants of Cibotii Rhizoma species, GCSB-5 raw material and GCSB-5 preparation. And validation of HPLC analysis methods were conformed for verification of HPLC methods by check to specificity, linearity, intra-day precision, inter-day precision and accuracy following ICH guideline.

• 분석과학
• /
• 제18권1호
• /
• pp.51-58
• /
• 2005

A comparison of the analytical data obtained by three $k_0$-NAA software programs was carried out using both the airborne particulate matter collected from an urban site and the certified reference materials of the air filter and urban dust to evaluate the performance of the analysis. The individual $k_0$-NAA standardization methods of three countries, Korea, China and Vietnam which had been modified from the well established $k_0$-program were used for the comparative analysis. The measured concentrations of 30 elements from the two kinds of air samples based on this software were in agreement with each other within about 20% analytical error except for a few elements. By contrast, the results of China and Vietnam were moderately higher than that of Korea due to a systematic error associated with the detection efficiency, gamma peak analysis and geometric effect.

• 한국유기농업학회지
• /
• 제25권4호
• /
• pp.749-758
• /
• 2017

This Research was the standardization of nutrient sources by reviewing the possibility of cultivation and analysis of imported nutrient sources used in Pleurotus ostreatus culture. As a first result, the concentration of heavy metals was not detected or trace, and the total nitrogen content of cotton seed pomace was 6.22% in Australia, which was higher than that of Chinese or USA. As a second result of physical properties of nutrient sources, the water holding capacity of beet pulp from Egypt was higher with increasing pressure. The volume water content of US was highest at 400hpa and 500hpa in case of cottonseed meal. Third, the content of total nitrogen was the highest at pH 5.51 and the total nitrogen content was the highest at 2.45, and the C/N ratio was the highest at 28.18. Last result shows that first germination day, yield and biological effciency of all treatments were not significant differnet except T2. These results shows that australian cootton was inappropriate to Pleurotus ostreatus culture. Nevertheless, the safety and standardization of the Pleurotus ostreatus culture medium should be assured by reviewing the media low material importing season, mushroom yield and nutrient sources.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.185-186
• /
• 2015

The use of non-bearing lightweight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Lightweight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the stiffness (static horizontal load resistance) test method for lightweight walls by using the actual impact load obtained through the load analysis test conducted in the previous studies. The size of specimen was set up as height 2.4m and width 3.0m. Test apparatus and test methods were referred to BS 5234-2:1992. However, the loading level applied to the specimen was divided into 3 steps (3000N, 1000N, 500N) that can be applied selectively depending on the purpose of the wall. The deformation characteristics according to the same loading level were vary depending on the specimen's type, and the evaluation criteria for functional damage may vary depending on the material, method of construction, and purpose of wall. Therefore, we did not suggest unified evaluation criteria of the stiffness to the test results.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.96-104
• /
• 2007

Glass melting process is influenced by both control and observation factors, where control factors include quantity and mixing ratio of raw material, the amount of fuel and air in-take. Further observation factors include temperature and pressure at each step of process inside glass melting furnace. Ambient Control is an effective means to eliminate complications from excessive variation among raw materials, or external disturbance from wide fluctuation of environment around equipments. Ambient Control uses both control and observation factors mentioned above. This study suggests an effective Proactive Control System that can enable genuine 4M standardization in glass melting furnace by applying Ambient Control.