• 한국가스학회지
• /
• 제21권4호
• /
• pp.30-41
• /
• 2017

화학물질은 인류생활과 산업발전을 크게 향상시키며 인류에 많은 이익을 주었지만 일부 위험물질은 인체의 건강과 환경에 유해한 영향을 끼쳐 오래전부터 선진국들은 엄격한 안전기준을 정하여 관리하고 있다. 우리나라는 세계 화학시장의 약 3.4%를 차지하는 화학 강대국으로 성장하고 있다. 국내외 화학물질 관련 법률은 유사하지만 세부적으로는 상이한 점이 많아 안전과 환경에 많은 위험을 주고 산업체 등에게 혼란을 야기시키고 있는 실정이다. 이러한 문제점을 해결하기 위하여 국내 화학물질 관련법과 국제 표준화제도(GHS)를 통일화하고자 하였으며, 산업체의 수출입 시 무역장벽을 해소하고, 위험물에 대한 사고예방 및 대응의 기본이 되는 선진형 물리적 위험성 분류 구분 단일화 방안을 제시하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3124-3124
• /
• 2001

The development and evolution of near infra-red spectroscopic (NIS) calibrations for high-moisture materials is an expensive proposition. Such investment is suspect unless the instrument, or instruments, on which calibrations were developed can be preserved intact or re-standardized as component replacements occurs. The objective of this paper is to detail the changes in performance of a six-year old instrument after maintenance in years five and six resulted in collection of spectral data that was increasingly removed from the calibration population. Calibrations for the analysis of mature sugarcane stalks, a high-moisture material, were developed successfully in 1995 using a broad sample population in terms of genetics, and spectral and temporal variation. The spectral library was further broadened in 1996. In 1997, 1999, 1999, and 2000, additional samples constituting 10% of the laboratories throughput were subjected to full component analyses using routine laboratory techniques. These samples were primarily random samples, but were complemented with samples that were significant for the spectral H statistic or for the component t statistic. In 1998, an additional calibration was developed for populations consisting of samples of either mature stalks (culms) or sucker culms. Substantial additional samples numbers were collected for this calibration in 1999 and 2000. Attempts to standardize the scanning spectrophotometer used for these calibrations with a second similar instrument in 1999 failed because the instruments were optically different, and standardization could not account for this. Maintenance adjustments were made to the remote reflectance probe of the original instrument in 1999, and replacement of its PbS detectors was done in 2000. Spectral data collected in 1999 and 2000 yielded spectral populations that were increasingly removed from the respective spectral populations on which the calibrations were developed. The mature stalk calibrations benefited marginally from evolutionary calib.

• 한국관광식음료학회지:관광식음료경영연구
• /
• 제9권
• /
• pp.131-161
• /
• 1998

None of us need to be reminded that these are exceedingly times. The evidence in all about us. Between rising costs and lowering prices, many businesses find profits being depressed almost to the vanishing point. The eating out food business is in just such a profit squeeze. Our ability to compete depends not only on our ability to control the price-cost picture, but to improve its kitchen product system. A kitchen product system is incomplete without a series of built-in improvement procedures. They must be a key part of the system. "improvement" means the continual betterment of all aspects of the operation-its personnel, products, sales, and its costs. These improvements create profits. This study is devoted to a discussion of the application of research methods and techniques to develop of modern kitchen system through the job standardization. Their use in executing other responsibilities related to the process of kitchen system improvement will also be seen. The steps of setting objectives, gathering data, analyzing and interpreting data, and arriving at solutions, conclusions, and/or recommendations are briefly out lined. The material presented emphasizes the need for an improved and systematic approach to the study of problems. It is also implied, of not stated, that the process should not become so mechanical that the principles of creativity are violated. The foregoing steps suggest a systematic approach to kitchen system improvement, finding solutions to problems, improving work methods, instituting changes, followting up on work related to the change. This study has been limited to the truly important points related to each step in the process, it will undoubtedly call to mind other factors for consideration, however, believe that the principles and approach suggested in this study will bring about better methods and improve kitchen operating results.g results.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.147-156
• /
• 2016

본 연구에서는 자전거의 경량화를 위해 탄소섬유 복합재료, 유리섬유 복합재료, 케블라섬유 복합재료를 자전거 프레임의 재료로 사용하여 강도 설계 및 최적화를 수행하고 재료 성능을 비교하였다. 이를 위해 유럽표준위원회가 제시하는 자전거 안전사항을 기준으로 복합재료가 가진 이방적 특성을 활용하여 적층각 최적화와 두께 최적화를 수행하였다. 또한, 최적화된 무게, 복합재료의 강도와 비용을 바탕으로 Digital logic 방법으로 재료별 자전거 프레임의 성능을 비교하였으며 이를 통해 섬유강화복합재료를 사용한 자전거 프레임의 구조적 안정성을 확보하며 동시에 경량화를 수행할 수 있었고, 자전거 프레임에 적합한 복합재료를 선별할 수 있었다.

• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• Toxicological Research
• /
• 제26권3호
• /
• pp.203-208
• /
• 2010

Bronchoalveolar lavage (BAL) is a useful tool in researches and in clinical medicine of lung diseases because the BAL fluid contains biochemical and cytological indicators of the cellular response to infection, drugs, or toxicants. However, the variability among laboratories regarding the technique and the processing of the BAL material limits clinical research. The aim of this study was to determine the suction frequency and lavage fraction number necessary to reduce the variability in lavage using male Sprague-Dawley rats. We compared the total cell number and protein level of each lavage fraction and concluded that more cells and protein can be obtained by repetitive lavage with a suction frequency of 2 or 3 than by lavage with a single suction. On the basis of total cell recovery, approximately 70% of cells were obtained from fractions 1~3. The first lavage fraction should be used for evaluation of protein concentration because fractions 2~5 of lavage fluid were diluted in manifolds. These observations were confirmed in bleomycin-induced inflamed lungs of rats. We further compared the BAL data from the whole lobes with data from the right lobes and concluded that BAL data of the right lobes represented data of the whole lobes. However, this conclusion can only be applied to general lung diseases. At the end, this study provides an insight into the technical or analytical problems of lavage study in vivo.

• 한국실내디자인학회논문집
• /
• 제23권3호
• /
• pp.125-133
• /
• 2014

While shifting from modern society to post-industrial society, social structure is changing from the period which pursues material affluence to that which pursues psychological abundance. Formation of various values along with pursuit of psychological abundance has made the illusion of standardization, massification, and popularization meaningless. Different from functionality oriented approach in the past, today's design requires diversified, multiple and integrated thinking and way in fast-changing social phenomena and stream, and lets human loose from the restriction of time and space thanks to technological development. It appears as new and various attempts along with paradigm shift of the wholle society, however the existing physical and actual things gradually transit to non-physical and non-actual things. Tendency of dematerialization has spread as far as esthetic and environmental genre on the basis of social and philosophical base along with change of consumption culture, and has displayed complex and de-genre aspect. Paradigm shift has expanded the range of communication by changing to user's independent awareness and sensitive concept, among them, light displays various changes of space by taking the role of new medium. Particularly, the light as the media expression beyond the phenomenon of light of traditional concept acts as an essential element to stimulate sensitivity and for experience as an immaterial element which shows this change of space most dramatically. This research aimed at recognizing space in complex dimension, exploring the relation between the light and space through media expression displayed in the realization of immateriality, expanding the meaning of light, and recognizing it as the possibility of creative and future-oriented light space creation which responds to technological development and social change.

• Journal of Applied Biological Chemistry
• /
• 제57권1호
• /
• pp.47-51
• /
• 2014

등심초(Juncus effusus)를 70% ethanol로 추출하고 이 추출물을 ethyl acetate분획, n-butanol 및 $H_2O$ 분획으로 나누었다. Ethyl acetate 분획에 대하여 silica gel, Sephadex LH-20 column chromatography를 반복 실시하여 2종의 화합물을 분리하였다. 화합물 1 (dehydroeffusol)과 2 (effusol)에 대하여 free radical 소거활성을 측정한 결과, dehydroeffusol (DPPH; $130{\pm}3.21{\mu}M$, ABTS; $39{\pm}3.51{\mu}M$)과 effusol (DPPH; $79{\pm}1.53{\mu}M$, ABTS; $24{\pm}2.73{\mu}M$)은 강한 항산화 활성을 나타내었다. 또한 이들 화합물들의 인체유래 위암세포(AGS), 폐암세포(A549)에 대한 성장억제 효과를 측정한 결과 모두 항암약물(CPA)과 유사하거나 더 높은 성장 저해 효과를 보였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.80-83
• /
• 2007

21세기에 들어오면서 자연재해의 원인이 폭염, 지진, 해일, 태풍 등으로 다양화되고 있을 뿐만 아니라, 자연재해의 발생 빈도와 규모가 증가되면서 그로 인한 인명과 재산 피해의 규모도 대형화되고 있는 실정이다. 이에 세계 50여개 국가는 지구시스템 변화의 이해, 감시, 예측에 필요한 지구관측을 담당할 지구관측그룹(GEO) 설립에 동의하여 활동하고 있다. 우리나라도 GEOSS 과학기술 국제협력을 국가 차원에서 효과적으로 대응하고, 한국 GEOSS 구축 사업을 성공적으로 수행하기 위하여 KGEO 사무국이 개설되어 활동하고 있다. 좀 더 발전적인 GEOSS 구축을 위하여 KGEO 사무국과 한국과학기술정보연구원(KISTI)이 협력하여 GEOSS 9개 편익분야에 관한 국내 현황조사를 실시하였다. 본 조사는 표준화, 정보시스템 운영 및 관리, 원시자료 및 메타데이터 보유현황, 인프라스트럭처, 기타 일반사항 등 5개 부분으로 나누어 진행하였으며, 조사 결과는 향후 국가 전지구관측시스템 구축방안 수립을 위한 기초 자료로 활용하게 될 것이다.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3704-3714
• /
• 2013

일반병원과 특수 전문병원의 직무스트레스의 유형과 특성을 파악함으로써 각 병원별 특성에 맞는 스트레스 극복을 통해 안정된 직원관리와 완화프로그램의 방향을 제시하고자 하였다. 본 연구의 참여자는 일반병원종사자 109명, 특수 전문병원종사자 117명이 설문에 참여하였으며, 측정도구는 한국산업안전보건연구원에서 지난 2004년 정책연구사업의 일환으로 진행된 '한국인 직무 스트레스 측정 도구의 개발 및 표준화 연구'에 따른 한국형 직무스트레스요인 측정도구를 사용하였다. 본 연구결과 일반병원과 특수 전문병원간의 환경과 조직체계에 따른 서로 다르게 나타나는 스트레스의 특성이 파악되었으며 향후 이 연구 결과를 토대로 각 병원특성에 맞는 스트레스 극복 프로그램의 개발의 기초 자료로 활용되기 바란다.