• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.312-315
• /
• 2004

In this paper we investigated the behavior of low molecular weight silicone fluids in silicone rubber by W treatment with solvent-extraction and GPC. It was shown that LMW quantity which was extracted by solvent-extraction was decreased in UV treatment time. $200{\sim}450\;g/mol$ distribution of LMW silicone fluid was contributed to recovery. It was similar to result from corona discharge. Morphological analysis was investigated by scanning electron microscope(SEM) and X-ray diffraction (XRD). The behavior of LMW silicone fluids in silicone rubber which was contributed to recovery was discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.381-386
• /
• 2001

The dust generated from the electric arc furnace steel making process is classified as hazardous material by Korean Environmental Protection Acts, mainly because of the existence of water teachable Pb, Zn and Cd. Thus the treatment of EAF dust is being carried out to fulfill both the environmental aspect and recovery of valuable metals. To establish the proper process for recovering the valuable metals (Fe, Zn, Pb and Cd) and producing the non-toxic slag from EAF dust, using RAPID-10 system, feasibility study have been carried out. To find out the scale-up factor for designing the commercial scale EAF dust treatment process(capacity 50,000 ton EAF dust per year) entitled RAPID-50 system. The design and construction of RAPID-50 (RIST Arc Plasma Industrial Device) system for treating 50,000 ton of EAF dust per year is now undergoing. Overall plan for treating EAF dust generated in KOREA will be setup after successful operation (December, 2002) of RAPID-50 system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.285-288
• /
• 2007

In the recent years the using of low-density material such as high-strength Al alloy on the various industries is becoming light-weight. High strength and hollow Al alloy is good material for stiffness and recycling. Therefore the advanced manufacturing technology with Al alloy is continuously required in many industrial fields. In this study simplified hallow rectangular section of Al alloy is analyzed by FE analysis. Bending stress is affected punching and rotating of wing-die. The analysis of press bending is preformed at first. The elastic recovery value of component and stress distribution acting from the result of the bending angle of three types were obtained. The designed precesses were analyzed by the commercial FE code, Deform-3D. Forming dies for each process were designed and prototypes were manufactured by the verified forming process. Some of the important features of design parameters in the press bending were reviewed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.373-376
• /
• 2004

전력전자 회로의 고속화에 따라 정류기의 역할은 점차 중요해지고 있다. 전원장치의 compact화 및 초소형화에 따라 스위칭 주파수는 높아지고 있다. 최근 전원장치의 on-line 뿐만 아니라 off-line에서의 효율을 향상시키려면 도통손실 및 스위칭 손실을 최소화를 요구받고 있다. 스위칭 주파수가 증가함에 따라 power rectifier는 도전 및 스위칭 손실의 최소화를 위해서는 스위칭 손실의 주된 원인인 역회복 특성을 잘 파악해야 한다. 이를 위해 본 고에서는 최근 제작된 SiC SBD의 역회복 특성을 분석을 위한 $t_{rr}$, 측정을 위한 $t_{rr}$ Tester를 MIL-STD-750-4031.4에 참고하여 제작하였으며, 제작된 $t_{rr}$ Tester를 이용하여 SiC SBD의 $t_{rr}$의 측정결과에 대해 기술하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.1-5
• /
• 2002

The sustain driver for AC plasma display panel should provide alternating high voltage pulses to ignite plasma and recover the energy discharged from the intrinsic capacitance between the scanning and sustaining electrodes inside the panel. In this paper, an efficient sustain circuit employing boost-up function is proposed to achieve a faster rise-time in order to be suitable to widely used the address display period separated (ADS) driving method. The proposed circuit improves the recovery efficiency, regardless of the variation of the panel capacitance. The principle of operation, features, and simulated results are illustrated and verified on a 7.5-inch diagonal panel at 200 [kHz] operating frequency based on experimental prototype.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.148-152
• /
• 2010

The superconducting fault current limiter (SFCL) applied into the neural line of a power system, which can limit the unsymmetrical fault current from the single-line ground fault or the double-line ground fault, was reported to be the effective application location of the SFCL in a power system. However, the limiting operation for the symmetrical fault current like the triple line-ground fault is not effective because of properties of the balanced three-phase system. In this paper, the limiting method of the symmetrical fault current in a power system with a SFCL applied into neutral line was suggested. Through the short-circuit experiments of the three-phase fault types for the suggested method, the fault current limiting and recovery characteristics of the SFCL in the neutral line were analyzed and the effectiveness of the suggested method was described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.246-247
• /
• 2007

최근 KEPRI-LSIS가 공동 개발한 하이브리드형 초전도 한류기 동작 시, 사고 검출을 담당하는 초전도체의 최적 설계에 적용하기 위하여 Au/YBCO 박막의 ��치 회복 특성을 조사하였다. $600\;V_{rms}$, 3 ms의 사고가 초전도 박막에 인가되었을 때, ��치가 종료된 이후 초전도성을 회복하기 위해 142 ms의 시간이 소요되었다. 또한 인가 시간이 증가함에 따라 소요 시간도 비례하여 증가하여 4 ms 동안 인가되었을 때, ��치 회복 시간은 272 ms로 측정되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.675-679
• /
• 2001

The research is to discuss the current resource recycling and recovery policy, which was enacted by Environmental Protection Administrative (EPA) in Taiwan. For the past few years, the solid waste generated in Taiwan has greatly increased about 5 % per year. In addition to the construction of landfill sites and incineration plants, 4 R techniques (Reduction, Reuse, Recycle and Recovery) were also publicized among the citizens and then promulgated to furthermore manage these increased solid waste. Although the regulations have been carried out to a great success, they still need to be revised and updated since solid waste contains varieties of different materials. Therefore, this research discusses the current regulation and makes suggestion for future regulation revision. From the results of this study, energy recovery was suggested to be emphasized in the regulation. Energy could be recovered from materials such as waste tires, and all kinds of plastic containers. Waste tires and most of the plastic containers made of hydrocarbon species, which contains great heating values, should be considered as one of the alternatives for the resource recycling.

• 한국의류학회지
• /
• 제44권4호
• /
• pp.776-787
• /
• 2020

This study investigated physiological and subjective responses to different types of firefighter station uniforms made with various designs and materials. Six healthy males participated in this study that consisted of 20 min of rest, 30 min of treadmill exercise, and 30 min of recovery in a hot and humid environment (34℃ and 65%RH). The experimental clothing conditions were as follows. 1) a fitted T-shirt and trouser made of 100% polyester (FC-Uniform), and 2) flame retardant T-shirts made of acrylic and cotton as well as trousers with aramid and polyester, designed for overfitting (Control). There were no significant differences in the body temperature, and sweat rate between the two conditions; however, the heart rate with the FC-Uniform was significantly lower than Control (p=.025). The clothing microclimate temperature at the chest of the FC-Uniform was significantly lower than the Control (p=.037), and a difference of 1℃ was maintained until the recovery was complete. There were no significant differences in the subjective responses; however, participants experienced a humidity sensation faster with FC-Uniform in the recovery phase. The results indicate that changes in the design and material of firefighter station uniforms may have a positive influence on reducing the thermal stress of firefighters.

• 유기물자원화
• /
• 제20권2호
• /
• pp.76-88
• /
• 2012

본 연구는 생활계폐기물 중 별도로 분리 배출되어 재활용 선별장으로 반입된 재활용 폐기물에 대한 수집운반에서부터 최종처리까지의 흐름을 분석하였다. 연구는 실제 현장조사를 기본으로 실시하였으며, 조사 결과, 최종 재활용 측면에서는 대체적으로는 적정 처리가 이루어지는 것으로 파악 되었으나, 불필요한 이동 및 중간처리 경로를 통해 처리되는 품목이 상당수 있는 것으로 조사되었다. 지자체에서 선별된 폐자원을 처리 또는 수집운반 하는 업체들은 오로지 경제성 원리에 입각한 폐기물 처리비와 운반비 차익을 주요 수익원으로 하기 때문에 불필요한 중간단계 및 장거리 폐기물 이동현상이 나타나게 된다. 따라서 합리적인 자원순환망 구축을 위한 첫 번째 단계는 폐기물 발생원의 근거리에 있는 재활용업체에서의 우선처리원칙이 필요하며, 필요에 따라 인근 지역의 폐기물을 동시에 처리 할 수 있는 광역처리체계 도입이 타당하다.