• 동위원소회보
• /
• 제21권4호
• /
• pp.38-45
• /
• 2006

A new herbal composition. HemoHIM, was developed using irradiated animal models and was successfully applied as an immune-improving agent. In a view that the protection and recovery of immune, hematopoietic and self-renewal tissues are essential for radioprotective agents, HemoHIM was developed based on a novel combination of three edible herbs (Angelica Radix, Cnidii Rhizoma. Paeonin Radix) that meet all those requirements. HemoHIM significantly protected the immune and hematopoietic system and enhanced their recovery in y-irradiated mice. For the application of HemoHIM as a health functional food and a supplementary agent for the cancer patients, the efficacy of HemoHIM to improve the immune functions was further evaluated in immune-depressed animals and humans. Animal studies demonstrated that HemoHIM significantly improved the immune functions in cyclophosphamide-treated mice, aged mice, and dexamethasone-treated mice. In human studies, HemoHIM enhanced the immune activity and cytokine secretion in sub-healthy volunteers, and alleviated the severe leukocyre depression in cancer patients during radiation and chemotherapy. Based on these results, HemoHIM was approved by Korea FDA as a material of health functional food for immune function improvement and will be commercially available soon. This case of HemoHIM research and development suggested that irradiated animals can be good models for biological degenerations such as immune depression, self-renewal tissue damage, and aging for the development of biological modulators.

• 멤브레인
• /
• 제14권4호
• /
• pp.329-338
• /
• 2004

본 연구에서는 4종류의 관형 세라믹 정밀 및 한외여과막(탄소 재질)으로 제지공장의 방류수를 물로 주기적 역세척하면서 여과하였을 때, 최적 역세척 시간을 규명하였다. 각 분리막에 대상으로 물 역세척 시간의 영향을 살펴 본 결과, 분리막의 기공이 클수록 길게 역세척 하는 것이 가장 많은 총여과부피, 즉 처리수의 회수 효율이 높기 때문에 가장 효과적이라 할 수 있다. 한편, 180분 동안 여과하면서 초기투과선속에 대한 투과선속의 변화를 살펴본 결과, 정상운전시간이 길수록 막오염이 많이 진행된 상태이므로 역세척 시간을 길게 해주여야만 막오염을 억제하여 높은 투과선속을 유지할 수 있다는 것을 알 수 있었다. 또한, 막오염의 저항 변화 추이를 관찰하여 최적 물역세척 시간을 규명해 보아도, 투과선속의 변화로부터 얻은 최적 역세척 시간과 거의 동일한 결과를 얻을 수 있었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제10회 하계 Workshop
• /
• pp.1-12
• /
• 2002

Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

• 자원환경지질
• /
• 제38권6호
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권1호
• /
• pp.41-47
• /
• 2017

After $SF_6$, which is being used in power equipment as an insulating material, is classified as one of the 6 major greenhouse gases, the maintenance and the refinement of used $SF_6$ started to get attention. In regard to this, KEPCO Research Institute (KEPRI) is developing $SF_6$ recovery and refinement technology starting with establishing a comprehensive $SF_6$ analysis system. With the analysis system, qualitative and quantitative analyses of the purity and the impurities of $SF_6$ before and after recovery, and before and after refinement have been carried out. The analysis system is comprised of GC-DID (Gas Chromatograph -Discharge Ionization Detector) for trace impurities analysis, GC-TCD (Thermal Conductivity Detector) for analyses of $SF_6$ purity and major impurities concentration from several hundred ppm up to percent range, GC-MSD (Mass Selective Detector) for analyses of impurities not included in standard gas, FT-IR (Fourier Transform-Infrared) Spectrometer for analysis of HF and $SO_2$, and moisture analyzer for analysis of moisture below 100 ppm. With this analysis system, complete analysis method of $SF_6$ has been established. This analysis system is being used in the maintenance of power equipment and the development of $SF_6$ recovery and refinement technologies. In this paper, the analysis results of four samples - gas and liquid phase $SF_6$ samples from a $SF_6$ refinement system before and after refinement are presented.

• 한국수산과학회지
• /
• 제42권3호
• /
• pp.238-242
• /
• 2009

Recently coastal seawater has been contaminated by enteric viruses such as the norovirus via untreated groundwater globally. Accordingly, the consumption of molluscan shellfish from seawater that has been contaminated with fecal material has become an important issues. The levels of enteric viruses in seawater are low and recovery and concentration of the virus from large volumes of water is difficult. We compared the effectiveness of two representative method of concentrating virus using negatively and positively charged filters. The mean retention of seeded FCV by HAMF and NCCF was 48% and 78%, respectively. Overall, the recovery of NCCF was 43.3$\pm$11% better than that of HAMF. However, the eluate obtained by using beef extract solution in the NCCF procedure caused an inhibitory effect on the RT-PCR; therefore, it was necessary to employ a PCR inhibitor removal procedure. The HAMF eluate contained no PCR inhibitors, but HAMF was not an effective method of concentrating the virus from large volumes of natural seawater due to clogging.

• Nuclear Engineering and Technology
• /
• 제6권4호
• /
• pp.231-237
• /
• 1974

유동액체를 수송하는 도관 또는 폐용기의 누설의 탐지 및 위치한정을 위하여 $^{51}$ Cr-EDTA및 $^{51}$ Cr-DTPA를 합성하고 Column Experiment 그리고 PH를 변화시켜 Batch equilibrium Experiment를 하였다. Column Experiment에서 $^{51}$ Cr-EDTA의 회수율은 Quartz sand에서 100%, Steel sawdust에서 80.9% 그리고 $^{51}$ Cr-DTPA는 Quartz sand에서 77.4%, Steel sawdust에서 6.4%이다. Recovery curve는 Steel sawdust $^{51}$ Cr-DTPA system에서 예외로 일정한 Plateau 를 표시하지 않는다. Batch Equilibrium Experiment에서 분배계수 Kd와 pH와의 관계를 Quartz asand, Montmorillonite, steel sawdust 그리고 Mixed Cement Raw Material둥을 매질로 하여 검토하였다. 일반적으로 $^{51}$ Cr-EDTA에 대한 Kd값이 $^{51}$ Cr DTPA에 대한 그것보다 낮다. $^{51}$ Cr-EDTA에 대한 Kd값이 pH 6.0, 7.0, 그리고 8.0에서 거의 0이 된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권3호
• /
• pp.447-457
• /
• 1994

Authors have studied retrospectively the facial nerve injury after TMJ surgery through the preauricular approach routine. The study material used was 4 patients of all 113 patients who were diagnosed as internal derangement and have been operated from March 1989 to February 1991 in Youngdong severance hospital, and were induced postoperatived facial nerve injury. The patient group who had the postoperative injured facial nerve was recognized degree of injury using the diagnostic method, Electromyography(EMG) and Nerve conduction test(NCT) which are used widely at present and was treated as conservative care and we identified the recovery time as the same method. The results as follows : 1. The meticulous care and precious surgical technique are needed in both operation and postoperation. During the TMJ surgery, the excessive retraction of the flap and frequent use of nerve stimulator and electric surgical knife should be avoided as possible and postoperative hematoma and swelling should be minimized. 2. The 4 patients were experienced with the postoperative facial nerve injury of all 133 patients who had been operated the TMJ surgery through the routine preauricular approach on our hospital. And the incidence of postoperative facial nerve injury happened was about 0.3% and its incidence was relatively low comparing with any other previous reports. 3. EMG and NCT were considered as useful methods which can diagnose the nerve injury objectively and identified the effect of treatment and recovery time. 4. The faical nerve-injured patients who were induced postoperatively after TMJ surgery, were diagnosed as second-degree nere injury through the EMG and NCT. And the patient group was treated well as conservative physical therapy for about 2 to 4 months.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.24-30
• /
• 2016

In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.477-493
• /
• 2016

A single process using hot water (0% green liquor) and green liquor (GL) was investigated for pre-pulping extraction on two types of raw material. The GL was applied at different alkali charges of 0-5% on a dry wood weight basis. The extractions were performed at an H-factor 900 at $180^{\circ}C$. The 0% and 3% GL extraction detected acetic acid (AA) at 10.02 and $9.94g/{\ell}$, extracts derived from hardwood, 2.46 and $3.76g/{\ell}$, extracts derived from softwood, respectively. The single liquid-liquid extraction (LLE) was studied using tri-n-alkylphosphine oxide (TAPO). Response surface methodology (RSM) was employed as an efficient approach for predictive model building and optimization of AA recovery conditions. The extraction of AA was evaluated with a three-level factorial design. Three independent variables, pH (0.5-3.5), temperature ($25-65^{\circ}C$), and residence time (24-48 min) were investigated. Applying the RSM models obtained, the optimal conditions selected of extracts derived from hard- and softwood with a 3% GL were approximately pH 1.4, $26.6^{\circ}C$, 43.8 min and approximately pH 0.7, $25.2^{\circ}C$, 24.6 min, respectively. The predicted and experimental values of AA recovery yield were similar whilst sugar retention was 100%.