• 대한산업공학회지
• /
• 제34권3호
• /
• pp.270-288
• /
• 2008

Among various environmental issues, those for worn-out products are increasingly important due to rapid development and improvement of products, shortages of dumping sites and waste-incineration facilities, and legislation pressures and customer recognitions to protect the environment. Under such circumstances, collection and product recovery activities give rise to additional material flows from customers back to collectors and reprocessors. Reverse logistics, the opposite direction of the conventional forward logistics, is concerned with the management of this material flow. In this paper, we consider the emerging concept of reverse logistics. First, the concept of sustainable development is explained to explain the philosophical background of various environmental issues. Second, we explain the basics of reverse logistics, which includes the overall structure and the classification of network types. Finally, we review the previous research articles, especially in the aspect of industrial engineering, after classifying the decision problems into : (a) product recovery strategy; (b) network design and operation; (c) inventory management; (d) disassembly problems; and (e) remanufacturing problems.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.7-16
• /
• 1984

The purpose of this study was to investigate the pulpal responses to adhesive resins as phosphoric ester system: "Clearfil F II" (Composite filling material), "Panavia EX" (Composite cementing Material) and "Silar" (Microfilled Compsoite resin) comparing with Zinc-Oxide-Eugenol cement. Total 70 cavities of the permanent healthy teeth from 5 dogs were prepared and placed with experimental resins and Zinc-Oxide-Eugenol cement as control. The dogs were sarificed at 5 intervals of 3 days, one, two, four, six weeks. The specimens were routinely prepared and stained by Hematoxylin-Eosin. Followings were the results obtained through microscopic examination. 1. In cases of Clearfil F II and Panavia EX without etching and lining, pulp response in the early stage showed more severe vascular congestion and hemorrhage than that of Zinc-Oxide-Engenol cement. 2. The pulp response of totally etched cases was similar to that of unetched cases in the groups of Clearfil F II and Panavia EX. 3. The cases of Clearfil F II and Panavia EX with enamel etching showed no significant histologic change compared to that of total cavity etching. 4. The Silar case with total etching showed retarded tendency of histologic recovery compared to Clearfil F II and Panavia EX group. 5. Generally, pulp responses of experimental groups were not severe and the six week case showed the evidence of a histologic recovery.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.68-72
• /
• 2013

The series connection-type superconducting fault current limiter (SFCL) with two magnetically coupled circuits was suggested and its effectiveness through the analysis on the current limiting and recovery characteristics was described. The fault current limiting characteristics of the proposed SFCL as well as the load voltage sag compensating characteristics according to the winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the series connection-type SFCL were carried out. The series connection-type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag compensating operations through the fast quench occurrence right after the fault appears and the fast recovery operation after the fault removes than that with the subtractive polarity winding.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.992-995
• /
• 2018

본 논문에서는 향후 인체 내장형 의료기기의 무선충전 및 지금까지는 발생하지 않은 다양한 유전체 내부로의 무선전력전송 시 유전체 매질의 전자기적 특성에 따른 효율 및 공진주파수 변화에 대한 공진기의 최적화 설계를 위해 공진기의 정전용량(capacitance)을 조정하는 방법과 공진기의 전후 표면에 공기층(air pocket) 설치 방법을 제안하였다. 본 연구결과는 추후 공진기를 둘러싼 다양한 유전체 환경에 대한 공진주파수의 설계 및 복원에 대한 기초 연구 자료로 활용될 수 있다.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.8-11
• /
• 2001

In this study. the recovery of plasma induced damage in the etched PZT thin film with $O_2$ re-annealing have been investigated. The PZT thin films were etched as a function of $Cl_2/Ar$ and additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etch rates of PZT thin films were $1600\dot{A}/min$ at $Cl_{2}(80%)/Ar(20)%$ gas mixing ratio and $1970\dot{A}/min$ at 30 % additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etched profile of PZT films was obtained above 70 by SEM. In order to recovery properties of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures in $O_2$ atmosphere. From the hysteresis curves, ferroelectrical properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed sample is consistent with the increase of the (100) and (200) PZT phase revealed by x-ray diffraction (XRD). From XPS analysis, intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of TixOy is recovered by $O_2$ recombination during rapid thermal annealing process. From AFM images, it shows that the surface roughness of re-annealed sample after etching is improved.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.458-465
• /
• 2017

본 연구에서는 굴 패각을 원료(골재)로 활용하기 위한 물리적인 가공방법에 관한 것을 실험을 통해 검토하고자 하였다. 실험결과 굴 패각의 형상에 의해 분쇄된 굴 패각의 적정 입도는 10mm 보다 작아야 될 것으로 판단된다. 또한 가동시간과 회수율, 각 입도별 잔류율과 다양한 입도분포를 고려할 때 굴 패각의 분쇄에는 커터 밀이 적합한 것으로 나타났다. 커터 밀의 경우, 8mm의 내부 스크린을 적용할 때, 회수율은 97.3% 12mm를 적용할 때, 98.2%, 20mm일 때, 98.9%로 나타나 스크린 사이즈가 커짐에 따라 회수율은 다소 증가되는 것으로 나타났다. 커터 밀의 내부 스크린과 인버터의 속도 차이에 의한 실험결과 스크린의 크기가 작을수록, 인버터의 속도가 빠를수록 조립률은 낮아지는 것으로 나타났으며, 동일한 스크린에서 인버터 속도의 상승은 더욱 낮은 입도범위의 재료 회수가 가능한 것으로 나타났다.

• 자원리싸이클링
• /
• 제22권4호
• /
• pp.3-11
• /
• 2013

폐촉매를 침출한 산성용액으로부터 용매추출에 의해 몰리브덴과 바나듐을 회수하는 공정을 조사하였다. 여러 침출액중 황산용액이 두 금속의 회수측면에서 가장 적합하다. 다른 불순물이 혼합된 용액과 순수한 몰리브덴과 바나듐용액에서 여러 추출제(양이온, 중성, 아민, 양이온과 중성 혼합추출제)에 의한 두 금속의 추출 및 탈거 거동을 검토하였다. 각 추출제는 금속 분리와 제 3상의 형성측면에서 장단점을 지니고 있다. 폐촉매의 산성 침출액으로부터 몰리브덴과 바나듐을 분리회수하는데 있어서 양이온과 중성의 혼합추출제가 가장 적합하다.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.88-95
• /
• 2020

An investigation of rare metals recovery from LiNi_xCo_yMn_zO₂ cathode material of the end-of-life lithium-ion batteries is presented. To determine the influence of reductant on the leach process, the cathode material (containing Li 7.6%, Co 20.4%, Mn 19.4%, and Ni 19.3%) was leached in H₂SO₄ solutions either with or without H₂O₂. The optimal process parameters with respect to acid concentration, addition dosage of H₂O₂, temperature, and the leaching time were found to be 2.0 M H₂SO₄, 4 vol.% H₂O₂, 70℃, and 150 min, respectively. The yield of metal values in the leach liquor was > 99%. The leach liquor was subsequently treated by precipitation techniques to recover nickel as Ni(C₄H₇N₂O₂)₂ and lithium as Li₂CO₃ with stoichiometric ratios of 2:1 and 1.2:1 of dimethylglyoxime:Ni and Na₂CO₃:Li, respectively. Cobalt was recovered by solvent extraction following a 3-stage process using Na-Cyanex 272 at pH_eq ~5.0 with an organic-to-aqueous phase ratio (O/A) of 2/3. The loaded organic phase was stripped with 2.0 M H₂SO₄ at an O/A ratio of 8/1 to yield a solution of 114 g/L CoSO₄; finally recovered CoSO₄.xH₂O by crystallization. The process economics were analyzed and found to be viable with a margin of $476 per ton of the cathode material.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.273-280
• /
• 2023

본 연구의 목적은 세라비다 회복 물질의 기능성 침구가 수면 전·후 경추의 근육 피로, 뇌파 및 온열에 미치는 영향을 규명하는 것이다. 연구대상자는 수면 장애와 경추 통증으로 인한 불면증을 호소한 D광역시 소재 50대 이상의 여성 12명으로 하였다. 본 연구의 결과는 첫째 기능성 침구가 근긴장도를 낮추는 결과를 보였다. 둘째 피부 온도는 기능성 침구와 일반 침구 모두 통계적으로 유의하게 증가하였다. 셋째, 뇌파에서(알파, 베타. 세타, 델타) 기능성 침구에서 통계적으로 유의한 차이를 보였다. 이러한 결과를 통해 세라비다 회복 물질의 기능성 침구가 수면 회복 기술의 충분한 효과가 있다고 사료된다.