• Journal of Biosystems Engineering
• /
• 제14권1호
• /
• pp.33-40
• /
• 1989

The flow properties of water added com-cob-mix(CCM) were studied in order to provide basic information for designing its pumping system. For the study, a model system similar to actual situation was constructed. From the experiment, it can be concluded that the flow properties of the water added CCM has close relationship with its moisture content as follows; 1. The pressure drop caused by friction was very low when the moisture content of water added CCM was more than 70%. However, when the moisture content of the material is about 60%, the pressure drop increases up to 10 kPa/m at low pumping speed, and 20 kPa/m at high pumping speed, respectively. 2. The water added CCM having about 65% moisture content showed pseudo-plastic flow characteristics. 3. As the moisture content of the material decreases, the shear stress increases more rapidly than the shear rate does. Finally, below approximately 60% moisture, the shear stress becomes a linear relationship with the shear rate. 4. It was possible to pump the material having the moisture content down to 58% through a pipe having 80 mm diameter by a pump operating at 234 rpm. However, by either increasing the diameter of the pipe or decreasing the pumping speed, it can be possible to pump the material having lower moisture content than 55%.

• 항공우주시스템공학회지
• /
• 제10권3호
• /
• pp.63-69
• /
• 2016

The properties of composite materials, when compared to those of metallic materials, are highly variable due to many factors including the batch-to-batch variability of raw materials, the prepreg manufacturing process, material handling, part-fabrication techniques, ply-stacking sequences, environmental conditions, and test procedures. It is therefore necessary to apply reliable statistical-analysis techniques to obtain the design allowables of composite materials. A new composite-material qualification process has been developed by the Advanced General Aviation Transport Experiments (AGATE) consortium to yield the lamina-design allowables of composite materials according to standardized coupon-level tests and statistical techniques; moreover, the generated allowables database can be shared among multiple users without a repeating of the full qualification procedure by each user. In 2005, NASA established the National Center for Advanced Materials Performance (NCAMP) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry. In this paper, the statistical techniques and procedures for the generation of the allowables of aerospace composite materials will be discussed with a focus on the pooling-across-environments method.

• 품질경영학회지
• /
• 제18권2호
• /
• pp.54-68
• /
• 1990

Contingency response in a FMS system requires that the system be able to identify and evaluate a number of alternatives. This paper is outlined that DSS completes with a problem processor in corporating Timed Petri Nets model, and a data base system. DSS enables the FMS user to get the maximum benefit from a FMS. The structure of this DSS parallels the organizational activities involved in running the FMS. In designing a shop floor controller for FMS, interactions between the different real time, discrete event functions must be established. The specification of the machine tool and material handling system functions working as a concurrent and cooperative system is given in terms of Timed Petri Nets. In addition, the basic concepts and uses of Petri Nets are surveyed. The system to be studied is first modelled by a Timed Petri Nets and then procedure for evaluating the FMS system performance are presented. Numerical examples are studied to illustrate a session of the FMS used-DSS interaction.

• 에너지공학
• /
• 제25권1호
• /
• pp.48-55
• /
• 2016

최소자연발화온도는 가연성물질이 주위의 열에 의해 스스로 발화하는 최저온도이다. 최소자연발화온도는 유기혼합물중 가연성 액체혼합물의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-hexanol+p-xylene 계의 최소자연발화온도를 측정하였다. 2성분계를 구성하는 순수물질인 n-hexanol과 p-xylene의 최소자연발화온도는 각 각 $275^{\circ}C$, $557^{\circ}C$로 측정되었다. 그리고 측정된 n-hexanol+p-xylene 계의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.417-422
• /
• 1990

For the robot manipulator in performing precision task, it is indispensable that the robot utilize the various sensors for intelligence. This paper presents the development and implementation of an integrated control system for the control of robotic manipulator, a feeder, a conveyor belt system, force/torque sensor system, and a photo sensor system. Micro controller board was constructed for hierarchical control of the system. To set up the program interactively, a user can make use of the software which includes the full-down menu and a dialog box. The user can make progress the program quickly and easily by a mouse. The related software was written in C and assembly languages.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 2부
• /
• pp.99-102
• /
• 2010

Today's construction is higher and more complex. So types and amounts of needed materials for construction project are increasing and those are occurred problems in construction site such as insufficient working space, confusion of materials handling order and working circulation. Because of those problems, research of progress management system using RFID+4D has been studied, but it is impossible to manage progress and material statement in real-time. So this study analyzed problems of current research and suggested VRML based RFID+4D Progress Management System. This Study focused on system basic concept and interface is designed for system development. This research is still progressing, so it has to do more development and research. However, it could be expected construction management efficiency and automation of management tasks.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.86-91
• /
• 2005

Regarding some of tire important works in tire shipyard, like tire production process, quality control, and material handling, there are many elements that disturb tire work-flaw. For example, there are mistakes in manufacturing, delay of production, and poor quality. These kinds of disturbances are from tire delay of communication time between tire production field and tire management. Therefore, it would be possible to strengthen tire competitiveness of shipbuilding industries by applying tire information technology based on Wireless Local Area Network (Wireless LAN), in order to establish tire multi-possession of real time production information in limited large shipbuilding yard. In this study, tire construction concept of tire information system, based on Wireless LAN, is proposed to build communication infrastructures in shipyards. The various information regarding shipbuilding inspection, process management, and material flaw are analyzed and constructed to databases in tire middle ware system, as tire platform for using Personal Display Agent (PDA). At last, tire middle ware system, which delivers tire information, is developed by tire C$\sharp$ and Microsoft.net; also, tire PDA application system is structured in WinCE O/S, and is tested and evaluated under tire server linked condition.

• 대한통합의학회지
• /
• 제9권3호
• /
• pp.79-86
• /
• 2021

Purpose : This study was conducted to provide fundamental data to prepare for countermeasure to protect health of workers in the dental clinics from hazardous chemical substance, and to assess effecting factors on management of Material Safety Date Sheet(MSDS) and handling of hazardous chemical substance among workers in dental clinics. Methods : This study was carried out a survey with structured self-administered questionnaire which was consisted of 7 questions about the management of MSDS, 9 questions about recognition and practice of hazardous chemical substances in dental clinics, and 7 questions about general characteristics. Total subjects of this study were 204 adult who workers in dental clinics located in Busan and Gyeng-nam province area. The collected data were analysed using the SPSS statistical package program (ver. 23.0). Results : The factor that positively affected factor on recognition and practice of hazardous chemical substances in dental clinics has experience that has been institutional health-care accreditation. The factor that positively affected the management of MSDS has experience that has been institutional health-care accreditation. Conclusion : It is necessary to prepare countermeasures such as campaign and education on cognition of general chemical substances, and also the author concern that it should be perform the education on handling of hazardous chemical substances in dental clinics for more effecting management of MSDS. In order to improve the management of MSDS and improve the awareness and safety of chemicals, it is necessary to encourage the implementation of the institutional health-care accreditation system or prepare guidelines for the management of MSDS.

• 한국시뮬레이션학회논문지
• /
• 제17권4호
• /
• pp.133-142
• /
• 2008

생산시스템의 유연성과 효율성을 동시에 만족시키기 위한 자재취급 시스템으로써 AGV 시스템을 사용한다. AGV 시스템은 전체 생산시스템의 성능을 결정하는 중요 요인으로써 최적 설계안의 도출이 필수적이다. 일반적으로 상용 시뮬레이션 소프트웨어를 이용하여 AGV 시스템 설계 검증이 이루어지고 있지만, 이러한 검증 과정을 신속히 처리하기 위한 일련의 절차에 대한 개발이 필요하다. 본 연구에서는 근사최적화된 일방향 흐름 경로와 다양한 운영 파라미터를 고려할 수 있는 일방향 AGV 시스템 시뮬레이터의 아키텍처를 제시 및 개발 하였다. 개발된 AGV 시스템 시뮬레이터는 Java를 기반으로 개발되었으며, 타부탐색을 이용한 근사최적 일방향 네트워크 설계를 지원하고, 사용자가 쉽게AGV 시스템의 설계 검증 및 대안분석에 사용할 수 있도록 개발되었다. 사용자의 시스템 설계 운영 정보는 입력창을 통해 입력되며 이 정보는 레이아웃 생성기, AGV 운영계획 생성기, 통합 AGVS 생성기로 구성된 시뮬레이션 엔진에서 자동으로 AGV 시스템을 모델링 및 시뮬레이션을 하여 빠른 시간 안에 시뮬레이터 사용자에게 피드백을 제공한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.334-343
• /
• 1996

Quality evaluation for food and agricultural products have always been one of the most elusive problems associated with the handling , processing and marketing in a food plant production. In order to detect physical foreign materials in food and agricultural products, non-destructive techniques have been developed for many years. Application of X-ray system to detect physical foreign materials in food and agricultural products could be considered to be a high potential method. Especially , it is impossible to detect internal physical foreign materials by visual inspections. In this study, it was tried to be applied for two different X-ray devices. Soft X-ray system with CdTe sensor and X-ray CT scanner were evaluated for advantage of the detection of non-meltallic foreign materials in food and agricultural products . Though the soft X-ray is not a high energy radiation, it is possible to detect small different density in a material. The CdTe sensor has a high resolution for t e soft X-ray energy region. The density characteristics of foods and foreign material were expressed region. The density characteristics of foods and foreign materials were expressed as a soft X-ray energy spectrum. The energy spectrum was analyzed by a personal computer with a multi-channel analyzer. X-ray CT scanner can provide visual image and analyze by three dimensional information inside food and agricultural products. The X-ray CT scanner using as a medical equipment was used to detect a foreign material. The density characteristics of food and foreign materials in food were tried to be detected by the threshold value on the basis of the CT numbers. The soft X-ray absorption characteristics for acrylin plates and distilled water were obtained and could be found the possibility of detecting a small physical foreign materials such as a plastic wrapping film , a stone and grasshopper in food and agricultural products.