• 대한치과의사협회지
• /
• 제52권7호
• /
• pp.416-424
• /
• 2014

The purpose of this study is to analyze the cost of dental implant by top-down method and, on that basis, to provide salient information for the suitable standard of dental insurance fee. A survey data and accounting documents from 36 samples of dental clinics secured with the organisation authority are used and analysed for extracting the representative sample of dental clinic. A researcher visited the dental clinics in person and conducted additional interviews in the omitted case of accounting documents. A dental implant cost by top-down method was estimated to 1,430,000 won. Labor cost accounted for 43% of the total cost structure, ranking it 1st and, management cost, material cost and interest cost on investment cost in order are investigated. Labor cost counts of the total cost that shows the similar aspect to the existing result. Cost in cost accounting of medical care would be used for the judge that cost pursed value for dental service, not price or fee.

• 대한간호학회지
• /
• 제24권2호
• /
• pp.216-225
• /
• 1994

The cost of hospice care should be covered by the insurance system if it is to be promoted in our country and this, in turn, requires a proper method to the estimate of this cost. The purpose of this study was to set up the method to estimate the cost of hospice care. First the cost effectiveness of hospice care were studied. By tracing the activities of hospice nurses for a given period, all the relevant data such as the scope and load of activities as well as the cost were collected. Then these were analysed and compared with the data obtained from hospice and home care. The results showed that the cost of hospice care was the most economic, and indicate its qualification as .1n in-dependent system. The main part of the cost of hospice care was found to be the labor cost which was up to 83% of the total. Therefore a method to estimate the cost should reflect the real labor cost. Several methods have been proposed in the study in terms of unit labor cost, service time, material cost, and the weight of the labor cost. All variables, including the service time surveyed in this study, can easily be translated into numerical values and it would not difficult to estmate the cost of hospice care. Hence by letting the hospice care be insured, hospice care can be expected to function as a good alternative to the present medical system.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.122-127
• /
• 1999

본 논문에서는 3마력의 컴프레샤 모터를 갖는 대용량의 인버터 에어컨의 원가절감과 성능향상을 위해서 병렬구동방식을 사용한 역률제어회로를 제안하였다. 역률개선 LC필터를 제거하고 출력캐패시터와 인버터 스위치의 정격축소를 통해서 재료비를 줄이기 위해서 적절한 설계절차를 제시하였다. 이렇게 결정된 소자를 사용하여 6[kW] 소지전력을 갖는 프로토형 회로를 구성하고 제안된 회로의 동작을 확인하기 위해서 실험을 하였다.

• 한국유기농업학회지
• /
• 제13권2호
• /
• pp.145-159
• /
• 2005

The objectives of this study were to analysis satisfaction and additional cost scale about environmental-friendly agri-product school meal program. To analysis satisfaction about environmental-friendly agri-product (EFAP), parent' survey were conducted residing in Cheonan city. The sample size of the survey is 304 respectively. As a result, parents of students recognized that EFAP is good for their children as well as they really want to change food material from general agri-product to EFAP. Therefore, environmental-friendly agri-policy to be more focused on consumption behavior and food security needs. In order to perfectly change food material to EFAP, about l trillion won will be additionally needed. It means that the market demand of EFAP will be dramatically increased. On the other hand, safe school meal program is one of the most important in a child's life, vital for proper growth and development.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.155-165
• /
• 2004

It is needed to develop on-line real time management and RFID-PPS(Radio Frequency Identification-Pallet Pool System) by putting information technology. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.234-234
• /
• 2010

Most high efficiency silicon solar cells use a passivated selective emitter. It have been an important research subject for crystalline silicon solar cells for decades. It is being used in production for high efficiency solar cells. Most of the selective emitter process require expensive extra masking, etching steps, and a double diffusion process making selective emitters not cost effective. In this paper, we study method for single diffusion step selective emitter process as an alternative to not cost effective double diffusion process. Cost effective selective emitter that the efficiency should be increased significantly (mare than 0.2%) and that the process should simple, robust and cheap.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.1-8
• /
• 2003

It is well known that design cost is only about 5% of final product cost but over 70% of it is determined during design stage. Earlier in the product design and development cycle the design changes occur, more economic they become. Therefore, it is recommended that the manufacturing time and cost of product are considered in steps involved in designing and manufacturing a product as early as possible. In this study, it is proposed a possible way that cm be available for estimating manufacturing time of parts, which are manufactured by conventional material removal processes (e.g. turning, milling and drilling). For it to be useful in the early design stage, the minimum number of informations on dimension shape, and design features of part will be used in this method.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.771-775
• /
• 2015

In this paper, we designed and fabricated low cost imprinting process for micro patterning on FCCL (flexible copper clad laminate). Compared to conventional imprinting process, developed fabrication method processing imprint and UV photolithography step simultaneously and it does not require resin etch process and it can also reduce the fabrication cost and processing time. Based on proposed method, patterns with $10{\mu}m$ linewidth are fabricated on $180mm{\times}180mm$ FCCL. Compared to conventional methods using LDI (laser direct imaging) equipment that showed minimum line with $10{\sim}20{\mu}m$, proposed method shows comparable pattern resolution with very competitive price and shorter processing time. In terms of mass production, it can be applied to fabrication of large-area low cost applications including FPCB.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.103-112
• /
• 2017

PURPOSES : In this study, field performance evaluation of crack treatment of pavement and the feasibility of surface treatment of pavement are presented. The performance and cost of preventive maintenance methods have been previously verified, and the methods are being used in many developed countries and cities. However, the performance and cost of the system have not been verified in domestic, field applications. Therefore, in order to improve performance, the field performance is evaluated, and a reasonable cost is proposed. METHODS : Visual Inspection was conducted to evaluate the field application and performance of the preventive maintenance method. In addition, the PCI index was calculated from the results of visual inspection of the application area of the surface treatment method, and the performance life of each method was predicted. For the economic evaluation, life cycle cost analysis was performed using the life cycle cost analysis program. RESULTS :In order to evaluate and quantify the field performance of crack repair material, the residue condition of the pavement surface after crack treatment, rather than the performance of the material, is evaluated. In addition, the crack resistance and performance life of surface treatment methods are evaluated. The cost of currently available treatment methods are compared to the common pavement cut and overlay method, and it is determined that the preventive method is not economical based on life cycle cost analysis. CONCLUSIONS :Because of the characteristics of cracking, it is necessary to conduct the evaluation of currently applied methods and the analysis of the cause of damage, by visual inspection. Moreover, in order to evaluate the performance and economic suitability of the currently applied surface treatment methods, it is necessary to acquire information on application sections by monitoring their long-term conditions and performance.

• 한국재료학회지
• /
• 제25권9호
• /
• pp.487-491
• /
• 2015

In photovoltaic power generation where minority carrier generation via light absorption is competing against minority carrier recombination, the substrate thickness and material quality are interdependent, and appropriate combination of the two variables is important in obtaining the maximum output power generation. Medici, a two-dimensional semiconductor device simulation tool, is used to investigate the interdependency in relation to the maximum power output in front-lit Si solar cells. Qualitatively, the results indicate that a high quality substrate must be thick and that a low quality substrate must be thin in order to achieve the maximum power generation in the respective materials. The dividing point is $70{\mu}m/5{\times}10^{-6}sec$. That is, for materials with a minority carrier recombination lifetime longer than $5{\times}10^{-6}sec$, the substrate must be thicker than $70{\mu}m$, while for materials with a lifetime shorter than $5{\times}10^{-6}sec$, the substrate must be thinner than $70{\mu}m$. In substrate fabrication, the thinner the wafer, the lower the cost of material, but the higher the cost of wafer fabrication. Thus, the optimum thickness/lifetime combinations are defined in this study along with the substrate cost considerations as part of the factors to be considered in material selection.