• Advances in environmental research
• /
• 제1권4호
• /
• pp.237-255
• /
• 2012

We review the research literature on relationship between environmental regulation and industrial development in three aspects of environmental regulation and investment, environmental regulation and efficiency, environmental regulation and trade. Indeed, the linkage between environmental regulation and material consumption of industrial system is absent. Environmental regulation is measured as the expenditure share for industrial pollutants abatement, and effluent charge intensity. Using panel-level data from 31 provinces, municipalities and autonomous regions in China, we build correlation models between material consumption and environmental regulation, results show that: (1) there are significant quadratic function relationship between material consumption and environmental regulation. And there is the fact that inflection point exists. (2) On basis of inflection points, we make two remarkable reflections. Firstly, the inflection points are the most important scale to judge reasonability and performance of regulations. Secondly, a Pareto improvement may occur when the regulations achieve a certain target. (3) Both intensities of industrial pollutants abatement expenditure and effluent charge have not yet achieved the expected target in most regions of mainland China at present. And most of regions of material consumption decreasing are distributed in western China. Main reasons lie in the impacts of industrial features as well as the regulations.

• 산업경영시스템학회지
• /
• 제39권3호
• /
• pp.180-191
• /
• 2016

Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant's compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in "A" company. The compressed air passes through a pressure vessel with two "towers" filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air $70^{\circ}C$ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

• 한국CDE학회논문집
• /
• 제17권6호
• /
• pp.387-397
• /
• 2012

The world has faced with various environmental problems such as climatic change, global pollution, and depletion of natural resources. Conventional economic development continues not only to intensify the magnitude of the problems but also to damage growth potential of future generations. Therefore, recent manufacturers are highly required to accommodate themselves to sustainable development that aims at preventing the loss to the future generations. Moreover, the manufacturers are under heavy pressure from various environmental regulations. This paper proposes green bill of material (Green-BOM) which conforms to the environmental regulations to restructure eco-friendly manufacturing system. Green-BOM is useful for managing green product and process information to satisfy several environmental regulations by recording energy consumption, recycle rate, volatile organic compounds (VOCs), substance information, and so on.

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.79-84
• /
• 2010

In recent years, conventional streetlight is replaced by LED streetlight to reduce power consumption dramatically and to maximize lighting effects. However the characteristic of power LED itself driven by high current to increase the illumination, we need to develop effective heat release device. This study suggests new concept of heat dissipation device using PCM (Phase Change Material) and shows an experiment results to investigate thermal effects of PCM.

• 산업경영시스템학회지
• /
• 제27권3호
• /
• pp.90-96
• /
• 2004

The objective of this study was to develop a model for safe work load based on a physiological model of metabolic energy of manual material handling tasks. Fifteen male subjects voluntarily participated in this study. Lifting activities with four different weights, 0, 8, 16, 24kg, and four different working frequencies (2, 5, 8, 11 lifts/min) for a lifting range from floor to the knuckle height of 76cm were considered. Oxygen consumption rates and heart rates were measured during the performance of sixteen different lifting activities. Simplified predictive equations for estimating the oxygen consumption rate and the heart rate were developed. The oxygen consumption rate and the heart rate could be expressed as a function of task variables; frequency and the weight of the load, and a personal variable, body weight, and their interactions. The coefficients of determination ($r^2$) of the model were 0.9777 and 0.9784, respectively, for the oxygen consumption rate and the heart rate. The model of oxygen consumption rate was modified to estimate the work load for the given oxygen consumption rate. The overall absolute percent errors of the validation of this equation for work load with the original data set was 39.03%. The overall absolute percent errors were much larger than this for the two models based on the US population. The models for the oxygen consumption rate and for the work load developed in this study work better than the two models based on the US population. However, without considering the biomechanical approach, the developed model for the work load and the two US models are not recommended to estimate the work loads for low frequent lifting activities.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.287-293
• /
• 2013

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. According to the greenhouse reduction scheme of Korean Government, construction sector targeted 7.1% reduction by 2020. Although this target is not higher than other industrial sectors, it is not easy to achieve the reduction target without radical advance in technology, which cannot be expected to happen soon, considering the conservative characteristics of construction industry. Most researches on environmental issues focus on the issues related to energy saving matters during material production stage or maintenance stage, such as heating and insulation, and few deal with the issues directly related to the energy use in the construction sites. This research regards the operation of equipment for the on-site construction processes as a system and attempts to model the energy use processes related to the activities in construction sites, and provides simulation results of earth excavation and hauling processes. The result of this research is expected to aid construction planners estimating the time-based patterns of energy use and assessing greenhouse gas emission and to help selecting more energy efficient alternatives at the planning stage.

• Journal of Construction Engineering and Project Management
• /
• 제3권3호
• /
• pp.10-16
• /
• 2013

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. According to the greenhouse reduction scheme of Korean Government, construction sector targeted 7.1% reduction by 2020. Although this target is not higher than other industrial sectors, it is not easy to achieve the reduction target without radical advance in technology, which cannot be expected to happen soon, considering the conservative characteristics of construction industry. Most researches on environmental issues focus on the issues related to energy saving matters during material production stage or maintenance stage, such as heating and insulation, and few deal with the issues directly related to the energy use in the construction sites. This research regards the operation of equipment for the on-site construction processes as a system and attempts to model the energy use processes related to the activities in construction sites, and provides simulation results of earth excavation and hauling processes. The result of this research is expected to aid construction planners estimating the time-based patterns of energy use and assessing greenhouse gas emission and to help selecting more energy efficient alternatives at the planning stage.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• 공업화학
• /
• 제17권5호
• /
• pp.509-516
• /
• 2006

Rushton turbine, paddle and propeller 임펠러 등 표준적인 임펠러가 부착된 기-액-고 3상교반조에서 고-액간 물질이동계수 $k_L$를 측정하였다. 표준적인 임펠러들에 대한 부유화한계회전수 $N_{js}$는 임펠러 높이와 가스유속에 따라 변했다. 입자부유가 통기에 의존한 Rushton turbine 임펠러의 물질이동계수는 Pgv에만 상관하였다. Rushton turbine, paddle and propeller 임펠러에 대한 물질이동계수 $k_L$은 임펠러의 종류에 의하지 않고 임펠러 위치에 영향을 받았다.

• 대한안전경영과학회지
• /
• 제16권1호
• /
• pp.201-206
• /
• 2014

GCM(Green Chain Management) is being spread by that companies which apply with eco-friendly concept in entire SCM(Supply Chain Management) perspective is being increased for resolving some recent environmental problems. There are reasons that numerous companies focus on GCM. At first various governments began to directly manage components and material contents about various noxious substances. Second, environment problem management in the entire logistics process from procurement of product materials to distribution of product became to be important according to introduction of certification system that evaluate the environmental impact throughout life-cycle of products. Purposes of this paper are 1) to analyze the GCM process whose important is more increasing in the recent logistics environment change, 2) to comprehend places and sources that generate environmental elements like energy consumption and greenhouse gas emissions in elements of logistics function, and 3) to construct integrated GCM system for observing activity of logistics function throughout life-cycle of products.