• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.39-44
• /
• 2002

A three node triangular element with drilling rotations incorporating Improved Layerwise Zig-zag Theory(HZZT) is developed to analyze the vibration of spinning pretwisted composite blades with embedded damping layer. Matching conditions at the interfaces between the damping material and the border material are enforced by setting the shear forces matched and different shear strains along the interfaces. The natural frequencies and modal loss factors of cantilevered pretwisted composite blade with damping core are calculated with the present triangular element enforcing the matching conditions and compared to experimental results and MSC/NASTRAN results using a layered combination of plate and solid elements.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.1-11
• /
• 1995

Manual lifting, as a part of manual materials handling activities, is recognized by authorities in the fields of occupational health and safety as a major hazards to industrial workers. In order to minimize the injuries caused by manual material handling activities as well as maximize job productivity, it is important to determine the maximum weights. This paper presents the optimal combination of membership functions according to the high lifting frequency and determines the safe maximum acceptable weights in manual lifting activities through the actual experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.571-574
• /
• 2004

The LED backlight can be designed to have the desired uniformity by using many combination of reflector patterns. The uniformity of the LED backlight can improve by applying the specially designed reflector patterns. In this paper, it was shown that the 72.7% of luminance uniformity of the LED backlight with reflector patterns was obtained by computer simulation.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.88-98
• /
• 1996

The present study is concerned with the flow friction and heat transfer characteristics of the combination of various regenerator materials, using the different Darcy number and porosity, which is filled uniformly and partially in a tube under oscillating flow condition. The poros medium is adopted as Brinkmann-Forschheimer extended Darcy model. Numerical results are obtained or the flow and temperature fields and described the effect of the combination of various regenerator materials and Womersley number on the pressure drop, the heat transfer and the regenerator efficiency. The results obtained indicate that not only heat transfer between the tube wall and oscillating flow but also the pressure drop at both ends of the regenerator are increased, while the regenerator efficiency is decreased in the increase of womersley number. It is also found that the friction factor is increased as Reynolds number is increased. The comparison between the combination of the various regenerator materials and the homogeneous regenerator material shows that the regenerator efficiency can be enhanced with the proper combination of various regenerator materials even though the averaged porosity of the regenerator is same.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.41-46
• /
• 2009

The rheological properties of highly concentrated Ag nano sol depending on particle size were studied. The Ag nano sol was prepared by reducing the Ag ion in aqueous solution. The size of Ag nano particle was controlled by two steps of nucleation and growth, and the thickness of adsorption layer was varied by molecular weight of polyelectrolytes. The polyelectrolytes acted as not only ionic complex agent in ionic state and but also dispersant after formation of Ag nano sol. The effective volume was controlled by combination of varying the molecular weight of polyelectrolytes and the size Ag nano sol. The particle size and the viscosity of nano sol were characterized by particle size analyzer, HR-TEM and cone & plate viscometer. It was found that the 10 nm and 40 nm-sized Ag nano sols were prepared by controlling the nucleation and growth steps, respectively. Finally, we could prepare highly concentrated Ag nano sol over 50 wt%.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2672-2678
• /
• 2011

철도차량의 차체 구조는 초기의 전(全) 목제에서 강제 후레임과 목제 차체의 조합, 리벳으로 결합한 전(全)강제차체, 전(全) 용접결합의 모노코크(monocoque)차체로 변천해 왔다. 구체의 재료 또한 Mild Steel이 많이 사용되어 왔으나, 가볍고 내식성이 우수한 경량 스테인레스 구체와 알루미늄 구체의 적용 비율이 급격히 높아지고 있다. 구조적으로는 종래의 골조와 외판으로 구성된 싱글 스킨 구조인 SSD (Sheet_Stringer Design)에서, 알루미늄 구체와 같이 대형 중공압출형재로 구성된 전(全)더블스킨 구조인 AED(All Extrusion Design)가 실용화되고 있다. 종래의 알루미늄 차체는 소형 압출재로 제작되어 용접에 의한 열영향을 받는 범위가 매우 크고 매우 취약한 특성 때문에 나타나는 용접결합 부분의 강성 저하가 많은 문제점을 일으켰다. 본 연구에서는 확장형 알루미늄 압출형재를 사용하여 부재 수를 감소시킴으로서 용접 공수를 줄이고 결합부의 용접 집중을 최소화 하여 품질 및 차체 강성을 향상 시킬 수 있는 방안을 제시하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권7호
• /
• pp.1053-1059
• /
• 2006

The effectiveness of a proteinaceous fibrous material formed during commercial fermentation of soy protein (PFSP) and cysteine addition were evaluated in order to improve on the properties of soy protein-based films. Nine types of films were prepared at pH 7, 9, and 11, with heat treatments at $70^{\circ}C\;and\;90^{\circ}C$ for 30 min, by casting 5% (w/w) PFSP aqueous solution, containing 2.25% (w/w) glycerol, on to polystyrene plates. The tensile strength (TS) of films ranged from 3.88 to 6.87 MPa. The highest puncture strength (PS) was observed with pH 7.0 films prepared from PFSP solution heated at $70^{\circ}C$ (P<0.05). Alkaline pH and temperature caused a decrease in both the TS and PS of the films. The thickness of films ranged from $58\;to\;74{\mu}m$. Water vapor permeabilities of the films decreased with increasing pH and temperature. To produce films from PFSP, pH value of 7.0 to 9.0 and heat treatment of $70^{\circ}C\;to\;90^{\circ}C$ were needed. A soluble nature of PFSP films in water might be useful for preparation of hot water-soluble pouches. Cysteine addition could be necessary to produce films with increased TS and enhanced barrier properties. The combination treatment that provided the best combination of barrier and mechanical properties was the PFSP film prepared at pH 7.0 with addition of 1% cysteine. The films were good oxygen barriers.

• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1563-1569
• /
• 1999

본 연구는 분무건조를 이용한 향기성분의 미세캡슐화를 위해 maltodextrin(MD), gum arabic(GA),alkenylsuccinated modified starch(MS), gellan gum을 피복물질로 사용하여 배합비율을 최적화하는데 목표를 갖고 수행되었다. 핵물질은 특성이 다른 5종류의 향기성분을 채종유와 1 : 4의 비율로 혼합한 flavor model system으로 사용하였다. 예비실험을 통해 핵물질 : 피복물질의 비율을 1 : 4로 하였으며, MD함량은 30%로 고정하였다. GA : MS를 $2\;:\;8{\sim}8\;:\;2$의 비율로 제조하여 유화액에서의 특성을 분석한 결과, GA : MS = 4 : 6에서 유화안정성이 우수하였으며, flavor release가 가장 적었다 이 비율에 gellan gum을 $1{\sim}5%$ 첨가하여 실험한 결과, 4% 첨가한 것이 결과가 가장 우수하였다. 이상의 결과로 MD : GA : MS : gellan gum = 30 : 26.4 : 37.6 : 4의 배합비율이 분무건조를 이용한 향기성분의 미세캡슐화를 위한 피복물질의 최적 배합조건이었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.87-92
• /
• 2010

본 연구에서는 실리카흄 대체재로 활용 가능한 실리카 흄 무혼입 결합재(SFFB)의 치환율에 따른 고강도 콘크리트의 품질특성을 비교 분석하기 위하여, 실리카흄, SFFB의 2수준과 물-결합재비는 25, 35% 치환율은 실리카 흄 10%, SFFB 5, 10, 15(%)의 4수준으로 설정하였다. 실험을 실시한 결과, 목표 유동성을 확보하기 위한 고성능감수제의 첨가율은 물-결합재비가 낮을수록 증가하였으며, SFFB가 실리카 흄 보다 저흡수성을 갖는 재료적 특성으로 인해 고성능감수제의 첨가율이 감소하는 경향을 나타내었다. 압축강도에서는 SFFB 치환율이 10%일 경우 인장강도에서는 치환율이 15%일 경우 가장 우수한 강도를 나타내었으며, 자기수축에서는 W/B와 SFFB의 치환율과 상관없이 Plain(SF)에 비해 수축이 저감하는 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1090-1092
• /
• 2006

There is provided white light illumination system including a radiation source, a first luminescent material having a peak emission wavelength of about 575 to about 620 nm, a second luminescent material having a peak emission wavelength of about 495 to about 550 nm, which is different from the first luminescent material and a third luminescent material having a peak emission wavelength of about 420 to about 480 nm, which is different from the first and second luminescent materials. The LED may be a UV LED and the luminescent materials may be a blend of three phosphors. A human observer perceives the combination of the blue, green and red phosphor emissions as white light.