• 한국정보통신학회논문지
• /
• 제16권4호
• /
• pp.661-668
• /
• 2012

높은 전력과 광대역에서 동작하는 동축선을 이용한 임피던스 트랜스포머는 추가적인 동축선을 이용하면 다양한 임피던스 변환 비율을 가질 수 있다. 50-${\Omega}$ to 25-${\Omega}$의 임피던스 변환 비율의 동축선 임피던스 트랜스포머에 50-${\Omega}$ 선로 두 개를 25-${\Omega}$ 지점에 병렬 연결하면 쉽게 광대역에서 동작하는 전력 분배기를 제작할 수 있다. 이런 동축선을 이용한 광대역 전력 분배기는 두 개의 출력 단자의 단자 정합 특성과 출력 단자사이의 격리 특성이 매우 낮아 개선이 필요하다. 본 논문에서는 단일 종단 여파기 설계 방식을 이용하여 동축선을 사용한 전력 분배기의 단자 정합 특성과 격리 특성을 개선하였다. 먼저, 저주파 대역 통과 단일 종단 여파기 계수를 이용하여 ADS 시뮬레이션을 통해 2-way 전력 분배기의 정합 단자 수와 Ripple에 따른 동작 특성을 살펴보았고, 종단 정합이 없는 전력 분배기와 2단 정합과 4단 정합을 가지는 전력 분배기를 제작하여 출력 단자의 정합 특성 및 격리 특성의 개선 정도를 살펴보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.894-897
• /
• 1998

A conventional parallel hybrid active filter has an inherent problem of large current ratings of devices used in inverter. In general, this problem has been solved by adjusting turn ratio of a matching transformer. However, making the transformer with high turn ratio may be not available for high power system due to its requirement for high voltage insulation. In this paper, a new configuration is proposed for parallel hybrid active filter. In the proposed hybrid active filter, the active filter is connected to the passive filter inductor in parallel through a matching transformer for the aim of reducing the size of inverter. Through computer simulations, we have shown the outstanding performances of the proposed topology.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.259-269
• /
• 2013

본 논문에서는 다양한 기판 집적 도파관 전송선 두께를 가지는 시스템에 적용을 위해서 천공된 기판 집적 도파관 다단 E-plane 변환기를 제안한다. 본 제안 구조는 ${\lambda}_g/4$ 임피던스 변환기 원리를 적용하여 ${\lambda}_g/4$ 길이 내에 천공을 삽입한다. 천공된 기판 집적 도파관은 도파관 내부의 낮아진 capacitance를 통해 특성 임피던스가 증가되어 E-plane 변환기로 구현된다. 또한, 체비셰프 다항식을 적용하여 구현한 천공된 기판 집적 도파관 다단 E-plane 변환기는 대역폭을 개선하였다. 천공된 기판 집적 도파관 2단 E-plane 변환기는 11.45~13.6 GHz의 주파수 대역에서 삽입 손실 $1.57{\pm}0.11$ dB, 입력 반사 손실은 15 dB 이상으로 나타났다.

• 한국음향학회지
• /
• 제28권6호
• /
• pp.491-498
• /
• 2009

본 논문에서는 수중 음향 압전 트랜스듀서의 고효율, 정전력 구동이 가능하도록 절연 트랜스포머와 체비셰프 필터함수를 이용한 임피던스 정합회로 설계 방안을 제안하였다. 제안된 정합회로는 진동과 무관한 트랜스듀서의 리액턴스 성분을 최소화하고 넓은 동작주파수 범위에서 평탄한 출력 전력 특성을 갖도록 설계되었다. 체비세프 필터함수를 표준 원함수로하는 저역통과 필터를 단종단 제자형 회로로 설계하고 대역통과 주파수변환을 통하여 트랜스듀서의 등가모델과 트랜스포머의 권선비에 적합한 정합회로를 설계하였다. 제안된 기법을 예제 모델 Tonpilz형 압전 트랜스듀서에 대한 가상부하에 적용하고 시뮬레이션과 실험을 통하여 그 결과를 비교함으로써 제안된 기법의 타당성을 검증하였다.

• 전력전자학회논문지
• /
• 제22권6호
• /
• pp.469-475
• /
• 2017

Using impedance matching techniques as a way to increase system power transferability in capacitive wireless power transmission has been widely investigated in conventional studies. However, these techniques tend to increase the circuit volume and thus counterbalance the advantage of the simplicity in the energy link structure. In this paper, a compact circuit topology with one leakage-enhanced transformer is proposed in order to minimize the circuit volume for the capacitive power transfer system. This topology achieves a reactive compensation, and the system quality factor value can be reduced by the turn ratio. As a result, this topology not only reduces the overall system volume but also minimizes the voltage stress of the link capacitor. An optimal design guideline for the leakage-enhanced transformer is also presented. The advantages of the proposed scheme over the conventional method in terms of power efficiency and circuit volume are revealed through an analytic comparison. The feasibility of applying the new topology is also verified by conducting 50 W hardware tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.164-164
• /
• 2009

A multilayer piezoelectric transformer(MPT) for step-down voltage was made by ceramic stack process. And then, the characteristics of piezoelectric transformer, such as resonance frequency, matching impedance, electro-mechanical coupling coefficient, voltage gain, heat generation and efficiency, are analyzed. The piezoelectric transformer consists of a lead zirconate titanate ceramic with a high electromechanical quality factor. The piezoelectric transformer, with a multilayered construction in the thickness direction, was formed with dimensions 15mm long, 15mm wide and 5mm thick.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.483-490
• /
• 2011

본 논문에서는 주기적 접지구조(PAGS)를 이용하여 실리콘 RFIC 반도체 기판상에 다단 임피던 스변환기를 제작 평가하였다. 제작된 임피던스변환기의 면적은 종래의 약 8.7 %인 0.026 $mm^2$이며, 8 ~ 49.5 GHz의 범위에서 양호한 RF특성을 보여주었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.98-101
• /
• 2007

A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권7호
• /
• pp.329-333
• /
• 2001

The pulsed poser system has been widely used to many applications, such as E/P(Electrostatic Precipitator), DeNox/DeSOx power system, ozon generator, etc. A pulse energy efficiency for load depends on the rising time, peak value, pulse duration and impedance matching, etc. The pulse generator generally required for short pusle duration and high peak value was forced to consider its volume and economy. In this study, developing a compact pulse generator that applied for cascading method to be made of two pulse transformers, we compared cascading voltage with non cascading one by applying the pulse energy to load. Adopting cascading technique to pulse transformer, we found that average cascading voltage was about 60[%] of theoretical value. Maximum cascading ratio was calculated at 60 times compared with non cascading voltage.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.409-416
• /
• 2005

For broadband high-data-rate power line communication with the allocated frequency bandwidth from 2 to 30 MHz on medium voltage (MV) distribution power lines, a signal coupling unit is developed. The coupling unit is composed of a coupling capacitor for coupling communication signal, a drain coil, and an impedance matching part. The coupling capacitor made of ceramic capacitor is designed for transmission property of better than 1 dB in the frequency range. The drain coil is used for preventing low frequency high voltage from junction of medium voltage power line in case that a coupling capacitor is not working properly any more. Also, using ferrite core, a novel broadband impedance matching transformer is developed. A complete coupling unit with a coupling capacitor, a drain coil, and a matching transformer is housed by polymer for good isolation and distinguishing from high voltage electric facilities. Each is fabricated and its frequency behavior is tested. Finally, complete signal couplers are equipped in a MV PLC test bed and their performance are measured. The measurement shows that the coupling capacitor works excellently.