• Journal of Aquaculture
• /
• v.21 no.3
• /
• pp.125-132
• /
• 2008

Seed production of olive flounder Paralichthys olivaceus was performed in a pilot RAS. The growth of juvenile olive flounder and changes in water quality were monitored for the entire production period. The pilot RAS consisted of 8 circular culture tanks($4.0mD{\times}1.0mH$), 2 trickling biofilters($1.7mD{\times}2.0mH$), 2 protein skimmers ($0.8mD{\times}2.5mH$), and 4 sedimentation chambers($0.7mD{\times}1.5mH$). The culture surface area was about $100.5m^2$ and the actual working volume was about $106.9m^3$. As many as 300,000 fertilized olive flounder eggs were initially distributed into 2 culture tanks with the water temperature at $19.0^{\circ}C$. Live feeds such as rotifers and Artemia nauplii were fed until the 32nd day after hatching, and a commercial diet was fed from the 19th day to the end of the experiment. After 70 days, 150,256 juveniles with a body length of $65.8{\pm}3.9mm$ were produced in the RAS, with a daily growth rate for body length of 4.7%/day. At this time, the final culture density was 1,495 individuals $m^{-2}$, and 13.6 L of makeup water, 0.071 kW of electricity and 0.025 L of diesel fuel were used to produce a juvenile olive flounder. During metamorphosis of the larvae, the TAN concentration increased to 0.99 mg/L, which made the larvae sensitive to result in some mortality. However no more massive mortality occurred at the juvenile stage after metamorphosis even at a TAN concentration of 4.25 mg/L and a ${NO_2}^{-}-N$ concentration of 2.45 mg/L.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.19-19
• /
• 2014

Pleurotus ostreatus, P. eryngii, and Flammulina velutipes are major edible mushrooms that account for over 89% of total mushroom production in Korea. Recently, Agrocybe cylindracea, Hypsizygus marmoreus, and Hericium erinaceu are increasingly being cultivated in mushroom farms. In Korea, the production of edible mushrooms was estimated to be 614,224 ton in 2013. Generally, about 5 kg of mushroom substrate is needed to produce 1 kg of mushroom, and consequently about 25 million tons of spent mushroom substrate (SMS) is produced each year in Korea. Because this massive amount of SMC is unsuitable for reuse in mushroom production, it is either used as garden fertilizer or deposited in landfills, which pollutes the environment. It is reasonably assumed that SMS includes different secondary metabolites and extracellular enzymes produced from mycelia on substrate. Three major groups of enzymes such as cellulases, xylanases, and lignin degrading enzymes are involved in breaking down mushroom substrates. Cellulase and xylanase have been used as the industrial enzymes involving the saccharification of biomass to produce biofuel. In addition, lignin degrading enzymes such as laccases have been used to decolorize the industrial synthetic dyes and remove environmental pollutions such as phenolic compounds. Basidiomycetes produce a large number of biologically active compounds that show antibacterial, antifungal, antiviral, cytotoxic or hallucinogenic activities. However, most previous researches have focused on therapeutics and less on the control of plant diseases. SMS can be considered as an easily available source of active compounds to protect plants from fungal and bacterial infections, helping alleviate the waste disposal problem in the mushroom industry and creating an environmentally friendly method to reduce plant pathogens. We describe extraction of lignocellulytic enzymes and antimicrobial substance from SMSs of different edible mushrooms and their potential applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.441-454
• /
• 2008

Shipyard design and equipments layout problem, which are directly linked with the productivity of ship production, is an important issue serving as reference data of production plan for later massive production of ships. So far in many cases, design of a shipyard has been relying on the experienced engineers in shipbuilding, resulting in sporadic and poorly organized processes. And thus, economic losses as well as trials and errors in that accord have been pointed out as inevitable problems. This paper extracts a checklist of major elements to fine tune the shipbuilding yard designing process and the input/output data based on the simulation based shipbuilding yard layout designing framework and methodology proposed in existing researches, and executed initial architecture to develop software that integrates all the relevant processes and designing tools. In this course, both user request and design data by the steps are arranged and organized in the proposed layout design template form. In addition, simulation is done based on the parent shipbuilding process planning and scheduling data of the ship product, shipbuilding process and work stage facilities that constitute shipbuilding yard, and design items are verified and optimized with the layout and equipment list showing optimal process planning and scheduling effects. All the contents of this paper are based on simulation based shipbuilding yard layout designing methodology, and initial architecture processes are based on object oriented development methodology and system engineering methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.65-105
• /
• 2018

This study examines the employment relations of TNC subsidiaries in Central and Eastern Europe(CEE). Specifically, this study analyzes the employment relations of Volkswagen subsidiaries, which has led the restructuring the CEE's automobile industry since the collapse of socialist regimes, and Hyundai subsidiaries, which has sought to cast employment relations through Greenfield Investment as a latecomer. After the collapse of socialism, with the massive inflow of foreign direct investment and the social legacy of weak labor unions, CEE has been included in the global production network as low-wage production base. Both VW and Hyundai have entered the CEE with their own characteristics and global strategies that have been developed in their home countries and have developed the local production. In the process, both have formed local employment relations, combining low-wage, unstable employment, and weak labor unions of CEE under their own strategy. In recent years, however, it has been doubtful of the sustainability of employment relations based on the advantages of low-wage production bases, as the pools of low-wage workforce decline and new union movements occur in CEE. These changes in CEE are an indication of the inherent contradiction of low-wage production base strategies.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.490-494
• /
• 2011

This paper reports the use of supplementary cementing materials (SCMs) derived from local resources, for the partial replacement of Portland cement to reduce $CO_2$ emission during cement production. Replacement of Portland clinkers up to 20 wt.% with SCMs in normal cements reduced $CO_2$ emission by 0.18 kg $CO_2$/kg. The compressive strength exceeded the standard specification for Portland cement ASTM C-150. Blended cement samples containing 20% Portland clinker replacement had compressive strengths of 37 MPa after 28 days of curing time. The microstructure evolution of blended cement at a composition of 80:20 was similar to that of the 100% Portland cement, where the structure between days 28 and 56 reached a steady state. Blended cements with compositions of 70:30 and 60:40 still showed progress of CSH plate formation and the lack of massive structure development. It is shown that the use of supplementary cementing materials could be as one of alternative ways to reduce $CO_2$ emissions during cement production.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.340-354
• /
• 2017

Currently, the global furniture market can not overlook environmental problems due to changes in environmental regulations. In order to grow into a global corporation, environmentally friendly design became essential. In addition, domestic and foreign consumers are increasingly interested in and spending on children's furniture, and demand for environment - friendly furniture for children's health and emotional development is increasing. In the era of universal consumer tastes due to massive mass production, it has been changed into a multi-product small-volume production period that reflects the preferences of various consumers, so that various types of furniture that meet individual preferences are required. Therefore, in this study, we investigated various personal opinions, perception, preference, propensity to use furniture, purchasing points, etc. for environmentally friendly children's furniture, and provided basic data for environmentally friendly children's furniture development that reflects consumer preference and requirements. Accordingly, 243 parents who have more than one child living in Seoul, Gyeonggi, and Incheon were surveyed about the use of children's furniture and the perception and preference of environmentally friendly children's furniture. According to the survey results, 64.57% of the respondents knew about eco - friendly children's furniture and the most popular way to get to know eco-friendly furniture was Internet advertising (49.48%). The rate of recognizing eco-friendly furniture as healthy furniture with no emission of hazardous substances was high as 56.16%. The purchase intention of eco-friendly children's furniture was very high at 86.01% and the most important factor in purchasing was the harmlessness to the human body (56.88%). 59.50% said that it is not possible to distinguish environmentally friendly furniture, which means that there is not much information to consumers yet. In addition, the preferred price range is 500~1000 thousand won, and the preference for the rest furniture is high. In the preferred form type, unit type modular furniture is 36.13%, in the material, wood is 72.35%, in the color, the color of wood with wood grain is high as 45.56%.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1832-1842
• /
• 2010

This paper introduces a new automatic processing system: "Contents Factory" for the mass production of contents. Through the contents factory, we provide an authoring environment to improve the usability and the efficiency in producing contents. The contents factory integrates recycling techniques for contents resources, contents development engines, authoring tools, and interfaces into a total processing system. Since it is multi-platform based including mobile devices as well as PCs, one can easily produce complete PC and mobile contents from raw resources. We produced an example, "Sejong square" via the contents factory in order to demonstrate its effectiveness and usability.

• Journal of Biosystems Engineering
• /
• v.35 no.1
• /
• pp.37-45
• /
• 2010

Since SRC (Short-term Rotation Coppice) such as poplar and willow can be harvested in three years, they are known to be a potential forest biomass as fuel for a power plant. The production system including transplanting and harvesting is, however, necessary to be mechanized because such a biomass should be handled in a massive volumetric size. A pull-type stem-cutting transplanter was developed in the research as the first step to realize the production of SRC. A needle-like transplanting device pushes a stem-cutting into the prepared soil bed by a pneumatic cylinder, and another device firms soil around a stem-cutting transplanted. Since this is an intermittent operation, it was necessary to develop a zero horizontal velocity mechanism which enabled only the transplanting needle part to continue a zero horizontal movement relative to the ground during the transplanting operation even when the tractor kept moving forward. The 2-row transplanter can transplant stem-cuttings at the rate of 6.5 seconds per row without missing a single attempt. The planting depth and distance were well maintained and controlled. Their CVs were between 2.1~3.4% and 0.87~1.7% for the depth and the distance, respectively. Although, the transplanted stem-cuttings tended to lean outward from the back-view and forward from the side view, they were planted within the range of $3^{\circ}$ from the upright position.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.1-13
• /
• 1994

The industrial minerals play an important role in mining sector. More than 70 % of total mineral production come from industrial mineral sector. This paper reviews geological occurrence of kaolin, pyrophyllite and limestone, and current demand-supply status of major industrial minerals in the Republic of Korea. The kaolin is mainly distributed in the Kyeongsang province, formed by deep weathering of Precambrian anorthosite on mountainside of gentle slope. The pyrophyllite mainly occurs in the Kyeongsang and Chulla provinces, formed by hydrothermal alteration of late Cretaceous andesitic and rhyolitic rocks. Pyrophyllite comprises massive and lenticular bodies and contains minor amounts of kaolin, alunite and pyrite, in some places andalusite and illite. The limestone(Great Limestone Series of Cambrian age) is distributed widely in the Kwangwon and Chungcheong provinces. The limestone bodies are approzimately 70 km long and 3 km wide, elongated NE-ward, and show high grade of CaO content. In 1992, the self-sufficiency ratio of 44 nonfuel (metallic and non-metallic) minerals was no more than 30 percent. However, the ratio of 27 industrial minerals (non-metallic) represents high value of about 72 percent. The export/productjon ratio of the industrial minerals shows decreasing patterns from 12.2 % in 1983 to 4.2 % in 1992. Also the import/production ratio shows rapidly decreasing pattern from 84 % in 1983 to 38.2 % in 1992.