• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 제4회 하계분리막 Workshop (초순수 제조와 막분리 공정)
• /
• pp.33-89
• /
• 1996

History of Membrane Process Development 1920 : microfiltration : Zsigmondy 1930 : ultrafiltration 1950 : hemodialysis : Kolff 1955 : electrodialysis 1960 : reverse osmosis : Loeb, sourirajan 1960 : ultrafiltration 1979 : gas separation : Henis, Tripodi 1982 : pervaporation : Tusel

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2624-2633
• /
• 1993

Mass transfer experiment by naphthalene sublimation method has great advantages in measurement of local transfer coefficients in the region of a three dimensional flow or for a model of complex geometry, which is considered to be very difficult with conventional heat transfer measurements. Mass transfer data obtained by naphthalene sublimation technique are converted to the heat transfer data through heat/mass transfer analogy. This analogy is valid for a simple or laminar flow, but new insight is needed when applying to a turbulent flow or complex flow such as separation, reattachment and recirculation, The purpose of this research is to investigate how geometries and flow conditions incorporate heat/mass transfer analogy. Mass transfer experiments are performed using naphthalene sublimation technique for a flat plate, a circular cylinder, and rectangular cylinders. And mass transfer data are compared with earlier heat transfer measurements for the same geometries. Usefulness of analogy relation between heat and mass transfer is examined with these results.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.651-657
• /
• 2010

Solute transport through a groove is affected by its vortices. Our laboratory and numerical experiments of dye transport through a single axisymmetric groove reveal evidence of enhanced spreading and mixing by the vortex, i.e., a new kind of dispersion called here the vortex dispersion. The uptake and release of contaminants by vortices in porous media is affected by the flow Reynolds number. The larger the flow Reynolds number, the larger is the vortex dispersion, and the larger is the mass-transfer rate between the mobile zone and the vortex. The long known dependence of the mass-transfer rate between the mobile and "immobile" zones in porous media on flow velocity can be explained by the presence of vortices in the "immobile" zone and their uptake and release of contaminants.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2001년도 정기총회 및 봄 학술발표회 초록집
• /
• pp.236-237
• /
• 2001

In this study, experiments were carried out to measure the variations in the corrosion potential and current density of polarization curves with amorphous $Fe_{70}Cr_5Si_{10}B_{15}$ and $Co_{70}Cr_5Si_{10}B_{15}$ alloy ribbon. The results were particularly examined to identify the influences of corrosion potential including various conditions such as hydrochloric acid, temperature, salt, pH, and oxygen. The optimum conditions were established with variations including temperature, salt, pH, oxygen, corrosion rate, and resistance of corrosion potential. The mass tranfer coefficient(${\alpha}$) value was determined with the Tafel's slope for the anodic dissolution based on the polarization effect with optimum conditions. The second anodic current density peak and maximum passive current density were designated as the critical corrosion sensitivity($I_{r}/I_{f}$).

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.130-137
• /
• 1988

This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.27-38
• /
• 2005

The present study investigated the effect of relative position of the blade on blade surface heat transfer. The experiments were conducted in a low speed wind tunnel with a stationary annular turbine cascade. The test section has a single turbine stage composed of sixteen guide vanes and blades. The chord length of the blade is 150 mm and the mean tip clearance of the blade is $2.5\%$ of the blade chord. The Reynolds number based on blade inlet velocity and chord length is $1.5{\times}105$ and mean turbulence intensity is about $3\%$. To investigate the effect of relative position of blade, the blade at six different positions in a pitch was examined. For the detailed mass transfer measurements, a naphthalene sublimation technique was used. In general, complex heat transfer characteristics are observed on the blade surface due to various flow characteristics, such as a laminar flow separation, relaminarization, flow acceleration, transition to turbulence and tip leakage vortices. The results show that the blade relative position affects those heat transfer characteristics because the distributions of incoming flow velocity and turbulence intensity are changed. Especially, the heat transfer pattern on the near-tip region is significantly affected by the relative position of the blade because the effect of tip leakage vortex is strongly dependent on the blade position. On the pressure side, the effect of blade position is not so significant as on the suction side surface although the position and the size of the separation bubble are changed.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1609-1620
• /
• 1993

본 연구에서는 자연형 태양열시스템의 열성능에 영향을 미치는 인자를 열유동 전산해석을 통해 규명하고 모델을 설정하여 활용률을 최대로 하는 형상을 제시하고자 한다.

• 멤브레인
• /
• 제1권1호
• /
• pp.65-77
• /
• 1991

PP 및 PTFE 실관막을 이용하여 xylene-HAc(acetic acid)-water계, MIBK-ethanol-water계 및 TBP-ethanol-water계에서의 압력차 변화, 수용상 및 유기상 유속 변화에 따른 아세트산 및 에탄올의 투과추출 실험을 행하였다. xylene-HAc-water계에서 구한 막상에서의 물질전달계수로 부터 실관막의 굴곡률을 구할 수 있었는바, PP 재질의 Celgard X10-400 및 PTFE 재질의 Tex TA001실관막의 굴곡률은 각각 1.82 및 1.43이었다. 에탄올의 투과추출시 투과 flux 및 총괄물질전달계수는 추출 용매로서 MIBK를 사용한 경우가 TBP를 사용한 경우보다 큰 것으로 나타났으며 이러한 경향은 유기상 유속이 증가함에 따라 뚜렷이 나타났다. 또한 총괄물질전달계수는 유기상 유속의 증가에 따라 비선형적으로 증가하였는 바, 이들 사이에 $K_o {\propto} V_{or}^{-0.35}$인 관계가 있음을 확인하였다. 에탄올의 투과추출에 있어서 Gore Tex TA001실관막을 사용한 경우 율속단계는 막상에서의 물질전달이었다.

• 의료법학
• /
• 제14권2호
• /
• pp.281-313
• /
• 2013

A physician has to do his best for the better treatment of his patiensts. But, if a physician cannot remedy his patients because of the lack of hospital facilities, the lack of medical knowledge and etc., the physician must transfer his patients to another suitable hospital immediately. This is called the duty of interhospital transfer of patients. The necessity of interhospital transfer of patients is primarily ocurred in emergency medical care situations. The Supreme Court Decision 2010DO7070 delivered on April 29, 2010 is one of the important decisions related to the duty of interhospital transfer of patients. The Supreme Court ruled that there were the physician's medical malpractice and the causation between the physician's medical malpractice and the death of patient, as the physician has left the patient without due observations for 1 hour and 30 minutes after the caesarean operation inspite of mass bleeding during the operation, and has transferred the patient to another suitable hospital later. And the Supreme Court ruled that the transferring physician has to explain the situation of the patient in detail to the physician being transferred. I agree with the Supreme Court Decision. As decided by the Supreme Court, physicians will treat their patients more carefully and in case of necessity for transfer, physicians will transfer their patients with more caustion. However, the study for this issue should be continued hereafter because concrete standards are not given to lawers and physicians just by the Supreme Court Decisions itself.

• 터널과지하공간
• /
• 제12권3호
• /
• pp.142-151
• /
• 2002

대전 식품냉동저장창고 파일럿 공동주위의 거리에 따른 비정상상태의 온도 분포를 산정하기 위해 Claesson(2001)의 해석해 및 Dirichlet과 Neuman 내부 경계조건을 갖는 수치모델들을 검토하였다. 온도 강하 단계동안 일정 표면 온도 경계조건에 기초하고 있는 Claesson의 해석해를 활용한 결과, 실제 암반에서의 온도 계측결과를 오차 평균 0.89$^{\circ}C$ 수준으로서 비교적 정확히 예측할 수 있었는데, $0^{\circ}C$근처의 실험실 암석 열물성을 입력하였고 현지 암반 조건을 표현하기 위한 특별한 물성 보정을 하지 않았다. 내부 공동 암반 벽면을 통한 열유속을 갖는 수치해석의 경우, 대류 열전달계수와 공동 내부 온도가 냉각시간에 따라 변화하기 때문에 경계조건을 가하기 어려운 단점을 극복하기 위해 새로운 경계조건 설정 기법을 제안하였다. 그 결과 오차 평균 1.58$^{\circ}C$의 수준으로서 온도 계측치와 부합하였다. 또한 공동 벽면에서 고정 온도 조건을 갖는 수치해와 비교하였다. 마지막으로 Claesson의 해석해 및 다양한 내부 경계조건을 갖는 수치모델을 활용하여, 공동 주변의 온도 분포를 정확히 예측할 수 있는 일련의 해석 단계 프로그램을 제안하였다.