• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.23-23
• /
• 2018

본 연구는 참우드풀과 우드풀의 중간형으로 알려진 좀우드풀(Woodsia intermedia Tagawa)의 전엽체 증식 및 포자체 형성을 위한 기내 외 번식조건을 구명하고자 수행되었다. 실험재료는 포자를 발아시켜 획득한 전엽체를 8주 간격으로 계대배양하면서 확보하였다. 전엽체 증식에 적합한 배양조건을 탐색하고자, 전엽체 300mg을 다진 후 배지종류(Knop, 1/4, 1/2 및 1MS)와 배지구성물질(sucrose와 활성탄)의 농도를 달리하여 8주간 배양하였다. 배양실은 온도 $25{\pm}1.0^{\circ}C$와 광도 $30{\pm}1.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h)로 조절되었다. 연구결과, Knop배지에서 생체중이 2.4g으로 전엽체의 증식이 가장 왕성하였다. 한편 MS계열 배지는 농도에 관계없이 매우 저조한 증식을 보였다. Sucrose는 0.5%를 첨가한 배지에서 생체중의 증가량이 가장 컸으며, 활성탄은 첨가농도에 관계없이 유사한 증식수준을 나타냈다. 포자체 형성에 적합한 토양조건을 확인하고자, 인공토양(원예상토, 피트모스, 펄라이트 및 마사토)의 비율을 달리하여 5종류의 혼합토양을 조성하였다. 혼합토양을 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진하고, 준비된 전엽체 1g을 10초간 분쇄한 다음 토양표면에 분주하여 11주간 재배하였다. 재배환경은 온도 $25{\pm}1.0^{\circ}C$, 광도 $43{\pm}2.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h) 및 습도 $72{\pm}2.0%$로 조절되었다. 연구결과, 모든 처리구에서 포자체의 형성이 확인되었으며, 특히 원예상토와 마사토를 2:1(v:v)로 혼합한 토양에서 포트당 421.0개의 많은 포자체가 형성되었다. 다음으로 원예상토와 펄라이트를 2:1(v:v)로 혼용한 토양, 원예상토, 피트모스, 마사토를 1:1:1(v:v:v)로 혼합한 토양, 원예상토 단용, 원예상토, 피트모스, 펄라이트를 1:1:1(v:v:v)로 혼합한 토양 순으로 각 228.0, 203.3, 126.8, 91.5개 형성되었다. 따라서 좀우드풀의 포자체를 대량으로 생산하기 위해서는 원예상토와 마사토를 2:1(v:v)로 혼용한 토양에 전엽체를 분주하여 재배하는 방법이 효과적일 것으로 판단된다.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.1-17
• /
• 2003

Populus species have been as a model species in tree breeding and we have enormous varieties resulting from the poplar breeding because of their fast growth performance and short rotation age. New varieties developed in Korea are common italian poplar(P euramericana, I-214, I-476), P euramericana“Eco 28”(Italian poplar No.1) and p. deltoides“Lux”(Italian poplar No.2), which were introduced from foreign countries. As hybrid polars, Hyun-Sasi(p. alba ${\times}$ P. glandulosa No.1, No.2, No.3, No4.), P. nigra x P. maximowiczii and P. koreana x P. nigra val. italica, were developed, and P. davidiana was selected as the result of selection breeding The total plantation areas covered with the new varieties are 935,162ha that include 745,773ha of P. euramericana, 184,636ha of P. alba x P. glandulosa, and other new varieties are 4,735ha. The new poplars are contributed to increase farmer's income as well as bare land tree-planting in Korea. The technologies associated with the poplar species were developed, such as the determination of optimum site for new the poplar species, the crossing method between incompatible poplar species, and the vegetative mass propagation. In the future, poplar species will be considered for phytoremediation species at contaminated areas such as landfill sites or with lives stock's waste water as well as wood production, a shade tree like road-side tree and public park tree.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• Journal of Acupuncture Research
• /
• v.23 no.2
• /
• pp.1-19
• /
• 2006

Objectives : The aim of this study was to investigate the hypoglycemic and hypolipidemic activities and mechanisms of Acanthopanax senticosus (AS) herbal acupuncture. Methods : Anti-diabetic and anti-steatotic activity of the AS herbal acupuncture was investigated on C57BL/6J ob/ob mice. After random grouping at the age of 9 weeks, the herbal acupuncture groups were injected subcutaneously at the left and right Gansu (BL18) corresponding acupuncture points alternately on exactly the same time every day with 0.1ml of either 400 mg/kg or 800 mg/kg of AS (AS400 and AS800) for 8-week period. As a positive control, metformin was administrated at a dose of 300 mg/kg (MT300). Body weights were measured weekly, and on every other week blood was collected for blood glucose analysis. At the end of study, blood was also collected for determination of plasma insulin and lipid levels, after which they were killed and periepidydimal fat, liver, muscle, and pancreas were immediately removed. The removed tissues were instantly soaked in liquid nitrogen and stored at $-70^{\circ}C$ for morphological examination and mRNA analysis. Results : The AS herbal acupuncture significantly prevented weight gain on C57BL/6J ob/ob mice. The AS herbal acupuncture lowered blood glucose and improved glucose tolerance in C57BL/6J ob/ob mice. The increase of insulin response during the OGTT was inhibited by the AS herbal acupuncture. Insulin sensitivity of skeletal tissue was enhanced. Plasma lipid levels were significantly improved in the AS herbal acupuncture groups. The AS herbal acupuncture decreased hepatic lipogenesis and hepatic triglyceride production, and increased fatty acid (FA) transporter that involves in FA uptake. The AS herbal acupuncture inhibited the increase of liver mass by prevention of the accumulation of TG but did not inhibit weight gain of fat tissue on C57BL/6J ob/ob mice. Conclusion : In summary, we have demonstrated several unique properties of the AS herbal acupuncture in decreasing body weight, and reversing insulin resistance and hepatic steatosis in ob/ob mice. This AS herbal acupuncture acts as an insulin sensitizer and specifically decreases circulating glucose and lipids, and suppresses hepatic lipogenesis.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.267-276
• /
• 1997

It has been studded that combustion and the production of air pollution of anthracite - bituminous coal blend In a fluidized bed coal combustor, The objects of thIns study were to investigate mixing characteristics of the particles as well as the combustibility of the low grade domestic anthracite coal and Imported h19h calorific bltununous coal in the fluidized bed coal combustor. They were used as coal samples ; the domestic low grade anthracite coal with heating value of 2,010kca1/kg and the Imported high grade bituminous coal with beating value of 6,520kca1/kg. Also, the effects of air flow rate and anthracite fraction on the reaching time of steady state condition have been studied. The experimental results are presented as follows. The time of reaching to steady state was affected by the temperature variation. The steady state time was about 120 minute at 300sc1h which was the fastest. It has been found that $O^2$ and $CO^2$ concentration were reached steady state at about 100 minute. It has been found that $O^2$ concentration decreased and $CO^2$ concentration increased as the height of fluidlzed bed Increased. It was found that splash zone was mainly located from 25cm to 35cm above distributor. Also, as anthracite traction Increased, the mass of elutrlatlon particles Increased, and $CO^2$ concentration decreased. As gk flow rate Increased,$O^2$ concentration decreased and $CO^2$ concentration increased. Regardless of anthracite fraction and flow rate, the uncombustible weight percentage according to average diameter of elutriation particles were approldmately high In the case of One Particles. As anthracite traction and k now rate Increased, elutriation ratio Increased. As anthracite fraction was increased, exit combustible content over feeding combustible content was Increased. Regardless of anthracite fraction, size distribution of Ued material from discharge was almost constant. Over bed temperature 85$0^{\circ}C$ and excess air 20% , the difference of combution efficiencies were little. It is estimate that the combustion condition In anthracite-bituminous coal blend combustion is suitable at the velocity 0.3m/s, bed temperature 85$0^{\circ}C$, the excess air 20%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.63-71
• /
• 2011

Portland cement production is under critical review due to high amount of $CO_2$ gas released to the atmosphere. Attempts to increase the utilization of a by-products such as fly ash and ground granulated blast-furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. In this study, we investigated the influence of alkali activator and superplasticizer on the flowability and compressive strength of the alkali-activated mortar in oder to develop cementless alkali-activated concrete using blast furnace slag. In view of the results, we found out that the type and mixture ratio of alkali activator, the type and adding order of superplasticizer results to be significant factors. When cementless alkali-activated mortar using blast furnace slag manufactured with 1:1 the mass ratio of 9M NaOH and sodium silicate, and added superplasticizer before alkali activator in the mixer, we can be secured workability with 180 mm of flow during 1 hours and compressive strength of about 50 MPa under $20^{\circ}C$ curing condition at age of 28days.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.613-617
• /
• 2011

This study was conducted to compare the quality of the brown rice (BR) and milled rice (MR) during storage. To assess quality, BR and MR were analysed by their fat acidity and flavor pattern using a SMart Nose$^{(R)}$. BR was stored for 30 days at $30^{\circ}C$, and analysed after 5, 15, 20, and 30 days of storage. MR produced in 2005, 2009, and 2010 were also tested. The fat acidity of both rice groups was increased with extended storage and the fat acidity of BR was more rapidly increased than that of MR in general. The flavor patterns from the SMart Nose$^{(R)}$ results were analyzed by the principal component analysis (PCA). The major groups of atomic mass unit (amu) for good discrimination contribution were from 41 to 85 amus. The PCA1 and PCA2 of BR were 95.64% and 2.78%, respectively when the samples were categorized by storage period. The PCA1 and PCA2 of MR were 81.18% and 13.85%, respectively when the samples were compared by production year. Both rice groups could be practically differentiated into flavor patterns by volatile properties for storage period. With regard to the correlation between fat acidity and flavor pattern, we could find that increasing storage period increased fat acidity value and changed flavor pattern from SMart Nose$^{(R)}$. Accordingly, SMart Nose$^{(R)}$ could be successfully used for easy screening and quality evaluation of stored rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.456-461
• /
• 2012

The leaves of $Stevia$ $rebaudiana$ are well-known in Japan, Korea, and China as a natural sweetener. Medicinal uses of this plant originated in Paraguay and Brazil in the form of aqueous decoctions of the leaves used as a contraceptive agent and for the treatment of hyperglycemia. In the present study, the antioxidant, anti-hypertension, and anti-inflammatory activities of $S.$ $rebaudiana$ extracts are investigated for their use in food. The biologically-active compound was isolated and purified from $S.$ $rebaudiana$. The isolated compound was identified as austroinulin ($C_{20}H_{34}O_3$; molecular weight 322) by mass, IR spectrophotometry, 1D, and 2D-NMR. Austroinulin was characterized as a diterpenoid possessing a 3-methylpenta-2,4-dienyl at C-9. When subjected to an inflammatory mediator inhibitory assay from lipopolysaccharide (LPS)-activated macrophages, the austroinulin inhibited the enhanced production of nitric oxide (NO) and inducible nitric oxide synthase (iNOS) expression (10 ${\mu}g$/mL＝67.9 and 45.1%, respectively). This was significant and dose-dependent. The results suggest that austroinulin from $S.$ $rebaudiana$ inhibited the NO and iNOS in RAW 264.7 cells.