• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.80-80
• /
• 2018

Hosta is a genus of the family Asparagaceae and distributed in East Asia. There are six Hosta species (Hosta capitata (Koidz.) Nakai, H. clausa Nakai, H. jonesii M.G.Chung, H. minor (Baker) Nakai, H. venusta F.Maek., and H. yingeri S.B.Jones) native to Korea and among them, four species (H. minor, H. jonesii, H. venusta and H. yingeri) are endemic to the Korea peninsula. Hosta is generally propagated by seed, crown division or tissue culture. However, tissue culture is a more efficient method to mass proliferation, a new cultivar development and disease-free plantlet production in a limit time. Hence, we conducted this study to evaluate the influence of various plant growth regulators (PGRs) treatments on the induction of callus and somatic embryo of the six Hosta species. Leaf, petiole and root were used to select optimum tissue culture explants. Petiole explants thus only were used for callus induction and somatic embryogenesis with TDZ (0.1, 0.5 or 1.0mg/L) and NAA (0.1 or 0.5 mg/L) combinations. After 12 weeks of culture, the highest rate of somatic embryogenesis was achieved on modificated MS medium containing 1.0 mg/L TDZ and 0.1 mg/L NAA in H. capitata and H. minor (15.5%, respectively), 0.1 or 0.5 mg/L TDZ and 0.1 mg/L NAA in H. jonesii (22.2%), 1.0 mg/L TDZ and 0.5 mg/L NAA in H. yingeri (26.7%), and 0.1 mg/L TDZ and 0.5 mg/L NAA in H. venusta (53.3%). H. clausa showed very low effect on somatic embryogenesis by PGRs; 2.2%. There was interspecies difference to PGRs respond for callus and somatic embryo induction. Regenerated multiple shoots and plantlet of H. minor, H. jonesii, H. venusta and H. yingeri were obtained via somatic embryogenesis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.40-40
• /
• 2018

비고사리과(Lindsaeaceae) 버들일엽[Laxqgramme saliciblia (Makino) Makino]은 잎이 녹색의 단엽으로 버들처럼 보여 관상가치가 높아 조경소재로 이용되는 착생식물이다. 또한 식물구계학적 특정식물종 V급, 적색자료집 VU급, 국외반출 승인대상종에 수록된 식물로 생태학적 보전이 요구되며, 개체수도 적은 편으로 알려져 있다. 본 연구는 보전이 요구되는 버들일엽의 전엽체 증식 및 포자체 형성을 위한 기내 외 번식조건을 구명하고자 수행되었다. 서귀포시 상효동 일대에서 식물을 획득하였으며, 기내에서 포자를 발아시켜 획득한 전엽체를 8주 간격으로 계대배양하면서 실험재료를 확보하였다. 전엽체 증식에 적합한 배양배지를 선발하고자, 전엽체 300mg을 다진 후 배지종류와 농도를 달리한 배지(Knop, 1/4, 1/2 및 1MS)에 8주간 배양하였다. 배양실은 온도 $25{\pm}1.0^{\circ}C$, 광도 $30{\pm}1.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h)로 조절되었다. 연구의 결과, 1/2MS배지에서 전엽체의 생체중이 5.8g으로 가장 많이 증가하였으며, 형태형성의 발달도 주걱형의 전엽체로 정상적으로 발달하였다. 기외 포자체 형성에 적합한 토양조건을 확인하고자, 인공토양(원예상토, 피트모스, 펄라이트 및 마사토)의 비율을 달리하여 5종류의 혼합토양을 조성하였다. 준비된 토양을 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진하고, 전엽체 1g을 10초간 분쇄한 다음 토양표면에 분주하여 16주간 재배하였다. 재배환경은 온도 $25{\pm}1.0^{\circ}C$, 광도 $43{\pm}2.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h) 및 습도 $72{\pm}2.0%$로 조절되었다. 연구의 결과, 원예상토가 많은 비율로 혼합된 처리에서 포자체의 형성이 확인되었다. 원예상토와 펄라이트를 2:1(v:v)로 혼용한 토양, 원예상토와 마사토를 2:1(v:v)로 혼용한 토양, 원예상토 단용한 토양에서 각 28.5, 23.0, 22.3개로 조사되었다.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.10a
• /
• pp.53-67
• /
• 2002

As in the past, we are concerned today with the magnitudes of mineral resources and the adequacy of these resources to meet future needs. In looking at global resource issues, we should consider the need for the resource, its supply, and the environmental consequences of using it. The need for a resource can become a resource dependency, especially as the global population expands and each of us becomes increasingly dependent upon hundreds of natural materials. Therefore, our great mineral consumption makes the human population a true 'Geologic Force', which will be even more significant in the future when the global population is projected to reach alarming proportions. Although our supplies of mineral resources probably will be sufficient for the 21s1 century, the uneven distribution of minerals in the Earth's crust almost certainly will continue to be a major problem The most likely result will be major shifts in both prices and sources of supply of many mineral resources. As for energy resources, we must avoid an obsessive dependency on one fuel and expand instead to thor energy resources. Finally, because the use of resources affects the environment, we need to focus on resource exploitation and global pollution, particularly in regard to ground water and arable land. We must manage our resources so as to be in balance with our environment. And the accelerated industrialization of South Korean economy over the last three decades has resulted in the mass consumption of nuneral commodities. South Korea has around 50 useful mineral commodities for the mineral industry, among 330 kinds of minerals described. The component ratio of the mining industry sector of the gross national production(GNP) in South Korea dropped from $1.2\%\;in\;1971\;to\;0.34\%$ in 1997 due to the rapid growth of other industries In the countxy. During the period from 1971 to 1997, the average growth rate of mineral consumption in South Korea was $9.13\%$ yearly and that of GNP per capita was $14.97\%$. The mineral consumptions per capita showed a continual Increase during the last 30 years as follows(parenthesis. GNP per capita): 0.99 metric tons in 1971($\$289$), 3.83 metric tons in 1989($\$5,210$), 6.11 metric tons in 1995 ($\$10,037$), and 6.66 metric tons in 1997($9,511). The total amount of mineral consumption in South Korea was 33 million tons of 32 mineral commodities in 1971, and 306 million metric tons of 47 mineral commodities In 1997.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.399-406
• /
• 2017

Contrary to the fact that the old films contain artistic and include contemporary literature, religion, and philosophy, latest films are produced with focusing on external interesting composition and sensational scene. A good movie emotionally express the directors' topic message exuding from an interesting story, and empathize with the social agenda which shows a sharp look of the directors' on contemporary social aspect. In the movies of the Coen brothers, it seems like an entertainment movie as typical black comedy genre through irony and happening, but in fact, it inserts a lot of social problems in the film to show that they cynically express their social agenda from a contemplative view. In their movie "The Big Lebowski (1998)", it seems like they are creating comical content through the main characters' unaffected attitude. However, it is director's excellent director of the sub-text that expresses American social issues such as Vietnam war, post-modernism and an obscurantist policy and au fond the comedy about the historical facts of mass production of social maladjustment into black comedy. We expect to contribute to make a step forward in the Korea film industry by analyzing such movies that has the cultural power of influence.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.43-48
• /
• 2007

This study is focused on the effect of the surface properties for the post electrode, which is used in pad formation consisted of SMT such as IC, passive component, combined with fired LTCC substrate, We carried out the surface microstructure of sintered electrode and the basic reliability evaluations with sample fired by microwave sintering to solve the problems occurred in post electrode by electric sintering. We evaluated surface densification status of post electrode according to various conditions of microwave sintering. In additions, it is obtained strong effect on blister improvement of post electrode because of over-sintering and the insufficient out gas in bum out process. As a result of adhesion strength, we confirmed $44.3N/mm^2$ in microwave sintering and $34.5N/mm^2$ in electric sintering, respectively. This result will be used for the basic reliability test. Finally, microwave sintering seems to be economic in process time with 30 min compared to electric sintering with 10 hr. In terms of Mass production and efficiency, microwave sintering are excepted to be higher than electric sintering.

• Korean Journal of Agricultural Science
• /
• v.29 no.2
• /
• pp.78-90
• /
• 2002

This study was carried out to investigate whether peptide produced from wheat protein by enzyme hydrolysis can be used as a natural antimicrobial agent. Antimicrobial peptide was obtained from wheat protein by protease of 7 species. The produced antimicrobial peptide was purified through ultrafiltration, membrane filtration and HPLC, and molecular weight and amino acid sequence of the purified antimicrobial peptide were determined. Among hydrolysate produced from wheat protein by protease of 7 species, antimicrobial activity was observed for the peptide obtained from Asp. saito protease. The Asp. saito protease did production antimicrobial hydrolysate showing the highest antimicrobial activity at reaction condition of $37^{\circ}C$ and pH 6.0, but not at reaction condition above $50^{\circ}C$. Wheat protein hydrolysate was fractionated by membrane filtration and showed antimicrobial activity between molecular weight 1,000 - 3,000. The antimicrobial activity fraction obtained by membrane filtration was separated through HPLC and showed antimicrobial activity in the peak of retention time 31.1 - 31.8 min. Since after wheat protein protease hydrolysate was heated during 15 min at $121^{\circ}C$, antimicrobial activity was maintained, we could be conviction as heat-stable peptide. Molecular weight of antimicrobial peptide identified by MALDI-mass was 1,633. Amino acid sequence of antimicrobial peptide was cysteine, glycine, prolin, prolin, prolin, valine, valine, alanine, alanine and arginine.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.579-588
• /
• 2016

The aim of this study was to investigate and development collagen peptide materials from skate skin. Protein and fat content of collagen peptide showed about 95% and 0.1%, respectively. Average molecular weight of collagen peptide was measured as 1,015. In the analysis of amino acid, glycine and hydroxy proline content in collagen peptide was 19.32% and 16.25%, respectively, showing a typical characteristics of the collagen peptide. In obese db/db mice ingested 500 mg/day of collagen peptide for 18 days, the amounts of food and water intake were decreased considerably, contents of triglyceride, total cholesterol were decreased significantly in white adipose tissue of db/db mice. The final yield of collagen peptide was 17.23% in the optimized process for mass production. These results indicate that collagen peptide from skate skin may serve as candidates of fat reduction in adipose tissue and could be used as functional food and cosmetic ingredients.

• KSBB Journal
• /
• v.26 no.6
• /
• pp.517-522
• /
• 2011

In our previous study, we isolated and characterized a 1-deoxynojirimycin (DNJ)-producing bacterium, Bacillus subtilis MORI, from chungkookjang, a Korean traditional food. B. subtilis MORI was subjected to ${\gamma}$-irradiation and the resulting bacteria were screened for increased DNJ production. A mutant was identified that produced 7.6 times more DNJ and named B. subtilis MORI 3K-85. In this study, the protein profiles of both strains were compared by one-dimensional and two-dimensional gel electrophoresis (1-DE and 2-DE, respectively) under both native and denaturing conditions. The 1-DE native-PAGE and 1-DE SDS-PAGE analyses identified 5 and 7 bands, respectively, that were found at higher concentrations in B. subtilis MORI 3K-85 than in B. subtilis MORI. Similarly, 2-DE analyses identified 20 protein spots which were found at higher concentrations in B. subtilis MORI 3K-85. The peptide mass profiles of these 20 proteins were analyzed by MALDI-TOF and compared with peptide sequences of B. subtilis and B. amyloliquefaciens in the MASCOT database. This screening suggested that three dehydrogenases, an aldolase, a synthetase, an isomerase, a reductase, and a peroxidase are elevated in B. subtilis MORI 3K-85. Based on this data, one or more of the elevated 8 enzymes might be related to the DNJ biosynthetic pathway.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.123-135
• /
• 2001

Several growth factors and polypeptides were studied for the regeneration of periodontal supporting tissues which had been lost due to periodontal disease. But these are not commonly used for regenerators of bone tissue or alveolar bone, because of the insufficiency of studies on their side effects, genetic engineering for mass production and stability for clinical application. Recently, many natural products, which have advantage of less side effects and possibility of long-term use, have been studied for their capacity and effects of anti-bacterial, anti-inflammatory and regenerative potential or periodontal tissues. Cnidii Rhizoma, Rhinocerotis Cornu and Drynariae Rhizoma have been traditionally used as a drug for treatment of bone disease in oriental medicine. The purpose of this study was to examine the ability of alkaline phosphatase synthesis of MC3T3-E1 cells when above medicines were supplimented. MC3T3-E1 cells were cultured with ${\alpha}-MEM(negative control)$, dexamethasone(positive control), and each natural products for 3 and 5 days. And then ALP synthesis was measured by spectrophotometer for enzyme activity and by naphthol AS-BI staining for morphometry. Except Cnidii Rhizoma, all of the natural products of this study induced higher activity of ALP synthesis than controls. Among them Drynariae Rhizoma induced the highest activity. In the aspects of culturing time, all medicines did not showed the difference between 3 and 5 days, but $10^{-7}g/ml$ group of Rhinocerotis Corun showed significant increase at 3 days than at 5 days. These results indicate that several natural products have a inducing ability of ALP synthesis on osteoblasts.