• 한국포장학회지
• /
• 제28권3호
• /
• pp.231-236
• /
• 2022

상추의 양액재배 별 생육과 수확 후 저장 특성에 미치는 영향을 규명하고자 하였다. '청치마' 상추를 이용하여, 무동력 수경재배 장치를 이용한 피트모스 배지경과 순수 담액 수경 재배의 생육을 비교하였고, 수확 후 상추의 생체중량변화, SPAD, 외관 등의 저장 특성을 검토하였다. 상추는 무동력수경재배의 배지경과 담액수경 재배 방법 간에 생육 후의 초장을 제외한 생체중, 엽수, SPAD, 수분함량, C/N율에서 차이가 없었다. 상추 재배 시 무동력 수경재배 방식을 통한 양액재배는 기존의 담액수경재배와 비교하여 생육에 무리가 없는 것으로 나타났다. 양액재배 방법에 따른 상추를 수확 후 저장 중 생체중량 감소나 외관 지수가 뚜렷한 차이를 보이지 않았다. 다만 엽록소 함량과 관계 있는 SPAD에서 저장기간이 지속됨에 따라 배지경 재배가 다소 높은 것으로 나타났다. 상추와 같은 작물이 재배적 이상이 없는 호조건에서 재배되는 경우, 수확 전 재배 방법에 따라서 수확 후 저장에 크게 영향을 미치지 않는 것으로 판단된다.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.161-171
• /
• 2024

This study aimed to investigate the effect of physicochemical properties and mix ratios of iron ore (oxide feed): coke (reductant) on the carbothermic reductions of iron ore. Coke size was fixed at ≤63 ㎛ while iron ore size varied between 150-63 ㎛ and ≤63 ㎛ respectively. Mix ratios were changed from 100:0 (reference) to 80:20 and 60:40 while the temperature, heating rate and soaking duration in muffle furnace were fixed at 1100 ℃, 10 ℃/min and 1 hour. Particle size analyzer, XRF, CHNS and XRD analyses were used for determination of raw feed characteristics. The occurrence of phase transformations from various forms of iron oxides to iron during the carbothermal reductions were identified through XRD profiles and supported with weight loss (%). XRF analysis proved that iron ore is of high grade with 93.4% of Fe₂O₃ content. Other oxides present in minor amounts are 2% Al₂O₃ and 1.8% SiO₂ with negligible amounts of other compounds such as MnO, K₂O and CuO. Composite pellet with finer size iron particles (≤63 ㎛) and higher carbon content of 60:40 exhibited 45.13% weight lost compared to 32.30% and 3.88% respectively for 80:20 and 100:0 ratios. It is evident that reduction reactions can only occur with the presence of coke, the carbon supply. The small weight loss of 3.88% at 100:0 ratio occurs due to the removal of moisture and volatiles and oxidations of iron ore. Higher carbon supply at 60:40 leads into better heat and mass transfer and diffusivity during carbothermic reductions. Overall, finer particle size and higher carbon supply improves reactivity and gas-solid interactions resulting in increased reductions and phase transformations.

• 한방재활의학과학회지
• /
• 제20권4호
• /
• pp.197-213
• /
• 2010

Objectives : The clinical trial was designed to investigate the safety and effects of Taeeumjowui-tang(Taiyintiaowei-tang) extracts on the change of the weight, body compositions, serum in obese patients. Methods : This was a 12-weeks, randomized, double blind, placebo-controlled clinical trial. Patients with a body mass index of either greater than $30kg/m^2$ or between 27 and $30kg/m^2$ with controlled hypertension, diabetes, hyperlipidemia were considered eligible. Participants of 41 obese patients were randomized either to Taeeumjowui-tang(Taiyintiaowei-tang)(23) or placebo(18). After 12 weeks of treatment, we measured anthropometric factors(weight, height, waist circumference, BMI(body mass index) etc.), abdominal fat area by CT(computed tomography)scanning, serum lipid(total cholesterol, tryglyceride, HDL-cholesterol, LDL-cholesterol), blood lever of variety(AST, ALT, BUN, creatinine etc.). Adverse events also evaluated. Results : After 12 weeks of treatment mean weight, waist-circumference, total cholesterol, LDL-cholesterol and score of KEAT-26 were significant changed in Taeeumjowui-tang(Taiyintiaowei-tang). There were no serious adverse events in either groups. Conclusions : There were limited in this study that is conducted within a short period of 12 weeks. but its weight and WC(waist circumference), WHR(waist hip ratio), total cholesterol, LDL-cholesterol and score of KEAT-26 loss effect was significant and it had few adverse events.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.55-62
• /
• 2014

Torrefaction is considered as a promising pre-treatment for thermochemical utilization of biomass. Torrefaction temperature and time are the critical operation parameters. In this study, investigated were the effects of reaction temperature and time on product composition of torrefaction. scanning electron microscope (SEM) images and thermo gravimetric analyzer (TGA) results were also compared for the effects of the operating parameters. SEM images showed that the pores were observed at the temperature of $250^{\circ}C$ for 30 minutes. Rapid decreases in weight were observed the temperature between 200 and$400^{\circ}C$. Higher heating value of the torrefied biomass was over 5,000 kcal/kg at the temperature of $250^{\circ}C$ for 45 minutes. Energy density, which is defined as the ratio of the energy yield over the mass yield was 1.36 at the temperature of $250^{\circ}C$ for 45 minutes. The energy density was higher up to 1.6 at the temperature of $280^{\circ}C$, which indicates greater loss in mass. The major components of the gas produced in the torrefaction were $CO_2$ and CO, with traces of methane. The total amount of gas was 31.54 l/kg and the calorific value of the gas was $1,164.4Kcal/Nm^3$ at the temperature of $250^{\circ}C$ for 30 minute reaction time. Based on the results of this study, the temperature of effective torrefaction is about $250^{\circ}C$ for 30 to 45 minutes of reaction time. Considering the heating value, it is desirable to utilize the gas for efficient process of torrefaction.

• 공업화학
• /
• 제33권6호
• /
• pp.618-623
• /
• 2022

분리판은 반응물 및 전자를 전달하고 부산물인 물과 열을 배출하며, 막전극접합체의 지지체 역할을 하는 고분자전해질 연료전지의 핵심 구성요소이다. 따라서 분리판의 유로 구조는 연료전지의 성능을 향상시키는데 중요한 역할을 한다. 본 연구에서는 압축률이 다른 구리 폼을 cathode 분리판에 적용한 25 cm² 단위 전지를 이용하여 성능 평가를 수행하였다. 금속 폼의 압축률이 증가할수록 총 저항이 감소하였으며, 특히 전하전달과 물질전달 저항이 사형 유로에 비해 크게 개선되어 중전류밀도 및 고전류밀도 영역에서 전압 손실을 줄일 수 있었다. 가압한 공기를 사용한 사형 유로 구조의 경우 연료전지의 성능이 압축한 금속 폼(S3)을 적용한 유로와 중전류밀도 영역까지는 큰 차이가 없었으나, 고전류밀도 영역에서는 유로 구조의 한계로 낮은 성능을 보였다.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.29-34
• /
• 2002

Two charging methods of electrostatic nozzle, i.e. induction and ionized field corona charging, were designed and evaluated for orchard sprayer application. An artificial (metallic) target was constructed and used in this experiment. The charge-to-mass ratio for the induction electrode was measured by using the Faraday cage. Two conventional pressure-swirl nozzles have been employed with different orifice diameters under the same experimental operating conditions. A commercial pressure-swirl nozzle with orifice diameter of 1.0 was used for the conventional spray. The diameter of the electrostatic was 0.59 mm. The experiment was carried out for individual nozzle sprays at $0^{\circ}$, $20^{\circ}$ and $50^{\circ}$ oriented angles and three nozzles, sprayed simultaneously at a distance of 1.0 and 2.0 m from the nozzle tip to the target. The nozzles were mounted on a carriage with constant speed of 1.26 km/h with a blower attached. The weighing method was employed to evaluate for the spray deposition, ground loss and estimated drift. The results show more promising for the induction charging method, especially at $20^{\circ}$oriented angle at a distance of 1.0 m from the target for a single nozzle and when all three nozzles were operated simultaneously for spray deposition. The results of the induction charging method show promising with the developed electrostatic technique.

• 한국주거학회논문집
• /
• 제24권4호
• /
• pp.53-60
• /
• 2013

Apartments amount to 58.3%, the highest proportion of domestic housing types. These apartments' lifespan (approximately 27 years) are one-third of the developed countries' housing lifespan due to the property developers and mass production. It is significantly short-cycle period considering the original physical lifespan of the apartment housing are 60 years. It has caused economic loss and environmental degradation. In recent years, research and development for the long life of the apartment housing has been actively performed, but it is limited on reconstruction and new construction. Reconstruction of existing a number of high-rise apartments is difficult owing to restrictions on the floor area ratio allowing for 40 years limit of decay resistance after the completion. Improving lifespan of the building has recently begun to receive attention as an alternative to remodeling. However, These sort of remodeling techniques tend to be focused on technology developed for the physical life extension. That means developing the techniques about dwelling-unit environment for residents satisfaction are required as well as improving physical construction. The purpose of this study is to propose and verify the Participatory Design Technique which can help the residents as the active participation in the design decision-making process.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.117-122
• /
• 2008

The apartment will be much more convenient than the other one in the application of green technologies, providing the merits by mass production. For example, pre-manufactured building materials can be effectively adapted to the formation of buildings. Recently, the form of double-enveloped window system has been developed for the purposed of minimizing energy loss occurred around windows. On the other hand, the expansion of balcony area was legalized and thus, a visual buffer area does not exist any more. All-glass window wall on apartment houses without a balcony produces pretty harmful area with direct sunbeam. A various types of glass can be applied to the window system and it plays a critical role in the determination of inner visual environment. For the purpose of verifying the potential of its daylighting, a mock-up model has been constructed and tested. The refurbished version of conventional window shows its illuminated characteristics. Clear and Low-e glass have been adapted for window area and daylighting ratio has been compared in both test cells.

• Advances in materials Research
• /
• 제9권3호
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권12호
• /
• pp.1776-1783
• /
• 2002

A population segregating for the naked neck (Na) gene was used to evaluate its effect on fast growing broilers at heat stress. An experimental stock comparable to those of modern broilers was established by backcrossing to colour synthetic male and female lines. Matings between heterozygous (Na/na) males and females produced normally feathered (na/na), heterozygous (Na/na) and homozygous (Na/Na) chicks for the present study. Day old to seven week old coloured broilers of three genotypes viz. normally feathered (na/na), heterozygous naked neck (Na/na) and homozygous naked neck (Na/Na) were compared for heat dissipation, growth performance, body conformation traits, blood biochemical parameters and carcass traits in tropical climate. In hot climate, naked neck broilers had significantly less body temperature and better heat dissipation capabilities as compared to normal broilers. The naked neck broilers had significantly higher body weight and better feed conversion ratio than na/na broilers. The Na/Na or Na/na broilers exhibited higher giblet yield, blood loss and lower feather mass compared to na/na broilers. The results indicated that the reduction in feather coverage in Na/Na and Na/na broilers facilitates better heat dissipation with lower body temperature, more body weight gain, better FCR and carcass traits compared to normal broilers.